nathanletwory
(Nathan 'jesterKing' Letwory)
September 9, 2020, 3:44am
2
In Rhino WIP - that is upcoming Rhino 7 the render engine of Rhino Render is powered by Cycles. Here are some examples picked from our very own Gallery section
[image]
This build was started as part of @theoutside 's “Subd cars-” challenge:
Now the front exterior is completed with details as: Improved head lights, tire threads, window wipers, interior mirror and a better door handle with a dent in the door. A rubber fitting for the fender was also added as smal, dark details add realism.
Rendered in Rhino Render at 100 samples with the nVidia denoiser.
And here is the rear:
[image]
Vents done by hand as I wanted to keep it SubD… that was tedio…
[handsss4]
I’m learning how to use the new physically based material settings in the v7 WIP.
Here trying out subsurface scattering to try and make a more life-like skin material.
The mesh comes from a scan by MPII from the Aim@Shape repository.
Thanks to @nathanletwory for the tips on how to set this up.
Not using any textures here, just these settings for the material, with a strong directional backlight and a dimmer rectangular source from the side
[image]
…and another trying it out w…
I took some pix of the thunderstorm to make a background for the diner, which started all the fires are here–including the one that’s threatening my friend’s house house, where I have moved some shop things in. It was only a cellphone pic, so I stacked a few more pics to reduce the noise, and used nVidia’s denoise to clean it up a bit.
At least I have a background I can use; the other wasn’t mine. The metal for the diner is still a problem texture because, while the real diners are brushed (san…
check the specs at the bottom…21.91 seconds.
v7 rhino render on an i9 pc/ rtx 5000 - nvidia denoiser active.
[Capture]
[Holomark3_Motorcycle]
This is the model for Holomark3 that I just finished.
It’s a concept design for an electric cafe racer, fully modeled in Rhino and rendered with the Raytraced display mode (Cycles engine) at 500 samples in 4.01 minutes on a GTX 1070.
Made with classic surface modelling, solid modelling, blocks, nested blocks, curvepiping, edge softening etc.
Some details:
(these are lower resolution and done in just over 1 minute each)
[image]
[image]
[image]
[image]
The sha…
Did a little more work trying to modernize the look of the retro radio I built for the getting started demo from a while back-
added back lit LCD controls and simplified the color scheme- [radio_render1]
Image ran for 4min-ish with NVIDIA denoisers kicking in at 20 samples. (coming soon for you to test) I could have ended the render at about 40 seconds, as it didn’t change noticeably after that, but let it ran because I got distracted by something else.
I haven’t seen too many architectural renderings yet, but you should be able to do that just fine with Rhino Render in Rhino 7 (and Raytraced in Rhino 6, as they are powered by the same engine)
Some examples of the render engine used outside Rhino maybe can show you its capabilities:
On Netflix you can find the film Next Gen , also rendered with Cycles.
5 Likes