I suggest to use the search function
[IMG_0730]
Hi all,
I’m a new learner of grasshopper. I fold this origami paper model, and I want to build it in grasshopper. The thing is I have no clue how to build this pattern. Does anyone have some ideas to write the grasshopper script of this pattern?
I built the single unit in Rhino which I upload in here.
SingleUnit.3dm (3.4 MB)
I would really appreciate that you can join in this discussion and help me.
Hi,
I am trying to fold a mesh using engine in kangaroo 2.
Meanwhile, I encounter a few problems. Firstly, two mesh faces didn’t weld properly when I am setting up for hinge component. As a result, when I extract the exterior edge it gave me the interior edge as well. I tried to solve this by isolating the unweld mesh, culling out the interior edge and replacing the path.
[weld%20mesh%20fail]
[Exterior%20line%20fail]
Apart from that, after grouping two adjacent mesh faces, some remain non-…
I’m researching how to generate Origami tesselations and simulate them in Grasshopper. So far I’ve been able to simulate origami foldings in Kangaroo such as the Miura-Ori pattern. However, I recently stumbled upon a Japanese YouTube account with the most sophisticated origami calculations I’ve ever seen. Here is a link to one of his Origami’s https://www.youtube.com/watch?v=VeKFS0wpCig . Check it out, as well as his other videos, they are quite amazing! It seems that he is using Excel and Matla…
Hi all,
I want to simulate this folding condition of this origami shape by kangaroo. I used the file from Daniel Piker’s sample.
[q3]
[q2]
[picture2]
[picture1]
But the result is incorrect. I am wondering is the issue of my anchor strength or something else.
[q1]
Furthermore, is there any way to do some simulations in some specific conditions like this？
[4]
[5]
This is the link of the vedio
folding simulation
Any suggestion is appreciated!!!
Thank you,
Origami_q.gh (50.3 KB)
Good evening!
We are currently working on a 1:1 scale origami structure at the university and so I am of course playing around a bit with Kangaroo.
I created a folding simulation of a rotational pattern and it seems to work fine. However when the pattern is unrolled/unfolded again, it does not yield the original shape any more. Hence a deformation must have occurred (I guess?)… This seems to be happing regardless which kind of origami pattern I am using. Even with a simple example by Daniel Pi…
discrete curved folding:
Hi!
I’m using the hinge component of kangaroo for a paper crease. I’m trying to model the spring back effect in paper creases. It is the property of a paper to bounce back to normal state when a force is applied on a hinge. This gives it spring like nature where the rebound force is proportional to the amount of folding. I wanted to know how the strength parameter of the hinge component is related to this.
[20190102_095157] i have tried to achieve this origami tessellation in grasshopper but i failed any suggestion/ideas to achieve this kind of origami tessellation.
Hey everyone,
I’m experimenting with (curved) folding simulations for my thesis and wrote a C# component (still WIP) that generates a mesh, triangulation lines and hinges from curves as inputs for Kangaroo. The functionality of the KingKong plugin was used as template.
I implemented the possibility to fold a set of circular or eplitical curves to fold a saddle curve, but the simulation doesn’t behave smooth and I have to apply a fold angle of 180° from the beginning to get the expected state o…
crane:
Hello
I used regular yoshimura origami crease Pattern and also defined mountains and valleys in Crane plugin, but the foldation wasn’t the one that I expected as a usual yoshimura shape. what I aimed is to solve the folding process and extract the rigid origami in this area. Could you help me out in this please?
What I want to Create:
[Correct One]
What the Result is in Crane Solver:
[The Folding]
Yoshimura F.3dm (176.8 KB) Yoshimura F.gh (24.7 KB)
Here are the Files I used above.
Thank…
