Hi. A new feature in VA 3, Level States has some problem. It only configures On & Off. It does not configure Elevation, Height, Cut Plane Level, and Top Offset. Thanks. [Capture]

Hi @Steven_Kim that’s correct. The Level States has been developed to only save the on/off status of levels, but it doesn’t keep the cut plane or top/bottom offset values. We can consider this option for future versions.

@Steven_Kim just a question. Are you sure you want the Elevation be saved in the Level States?

Hi. Francesc. I tried using the Level States feature to switch the cut plane level between the floor plan and ceiling plan, as you otherwise have to change the cut plane value manually every time you switch between them. Thanks.

Hi Steve, why don’t you use a sub-level instead? it will let you have a new CPlane on the desired elevation, and sub-levels have their own Cut plane.

Hi. I could not get correct a result for RCP by using sub-level. This is correct result for RCP. Elevation : 2,3 m, Cut Plane : 0 [Corret RCP Representation] However, If I use 0 m for Elevation and 2.3m for Cut Plane, I got a wrong result. [Wrong_01] When I use sub-level for RCP, none of the …

Hi Steve, indeed, there is something now working properly with RCP on sub-levels. We will revise these issues and get back to you when we fix them.

[Capture] 1st Floor_RCP is a sub-level of 1st Floor, which is the floor plan. It seems that if I want to use a sub-level for the ceiling plan, I have to switch to the ceiling plan view when activating the sub-level. Then, when I switch back to the floor plan (1st Floor), I need to change the view t…

Hi @Steven_Kim [image] Steven Kim: Did I understand this correctly? Yes, that’s correct. You need to switch from “Set Floor Plan” to “Set Ceiling Plan” each time you want to change what you want to see in each viewport. You can have two views, each one showing a different level in plan / cei…

[image] Francesc Salla: you can use the Level States to restore each level settings in the view. I don’t understand how the Level States can solve this issue. As far as I know, Level States can only save visibility. It can’t save the view, can it? I would suggest that the Level Panel should …

The Problems with Level States

VisualARQ

fsalla (Francesc Salla) February 5, 2025, 3:10pm 8

@Steven_Kim We have fixed the issues of RCP for sub-levels in VisualARQ 3.2, which has been relased today: VisualARQ 3 - Version 3.2 released

Topic		Replies	Views
How to use Visualarq level State Manager VisualARQ windows , mac	2	181	June 14, 2024
Ceiling Plan Issues VisualARQ windows	9	312	October 1, 2025
Level double-click visibility should respect Sub-level hierarchy VisualARQ windows	7	115	October 15, 2026
Levels And Cut Planes Not Working As Expected VisualARQ windows	26	1532	May 7, 2025
How to create sub-level for lowest level? VisualARQ windows	11	247	February 20, 2025

The Problems with Level States

Related topics