Point collection to Autobolt

Grasshopper Tekla
1

Guys Im reallly struggling to get Autobolts to Work. I have created a plate and divided it into a grid, and I want to put bolts at each point. I’ve used the first and last point of each row of points for the Bolt start and finish, created pattern based on the number of pointa and the distance between the first 2 points.

I’ve feed the auotbolt component all the rows of Holes and the BoltX and BoltY attributes, but no matter what I try the Autobolt fails. Ive tried loads of different list combinations but I cant seem to get it to work.

(Orginally I used Cuts to do this, but Tekla ground to a hault.:))

Apprecieate any help in advance.

Autobolt Support Question.gh (33.4 KB)

2

image
image1916×765 108 KB

Autobolt Support Question_rp_a.gh (37.7 KB)

1 Like
3

Rajeev,
Thank you so much for that. I really apprecieate it.

Only thing is it inserts each bolts set (in this case 7 times) on top of itself ?

Any suggestions ?

Thanks for your help.

4

Dont worry, I flattened inputs and that solve the problem.

Thank you again

1 Like
5

Didn’t know you dabbled in Grasshopper Greg, hope all is well!