Lattice creation using Intralattice grasshopper plugin

[kishore_v2 (kishore v)]

Intralattice is taking too much time is creating lattice structure. What can be done to make it faster.

[laurent_delrieu]

Hello

if by structure you mean mesh, Dendro (and now also Isopod) could replace the meshing component of Intralattice.

[kishore_v2 (kishore v)]

Isopod has alot of error in there lattice mesh. and dendro doesn’t have lattice creating mesh in it.

[laurent_delrieu]

not sure you understood ! See that and you can also do some search.

IntraLattice Point/Curve Attractor

Hello everyone, I hope you are doing good. I want to create a lattice mesh with variable density. I used IntraLattice to create the shown script but unfortunately don’t have full control of the gradient command. Is it possible to plug in a point and/or curve into the ‘gradient string’ that then increasing/decreases the radius of the lattice structure close to the point/curve ? Maybe even with a Graphmapper for optimal control ? Thank you for your help! [IntraLattice Gradient] Intralattice G…

Dendro - Dynamically driven variable radius lattice

Had a student reach out to me about this and thought I would share the definition. This is for generating lattice structures with variable radius struts that are driven by multiple input points. This would be useful if you are looking to control the mechanical properties of a lattice by increasing the diameter of the struts in specific areas. ex: If you wanted a 3D printed shoe mid-sole design to be made up of a lattice that had increased compression resistance under the ball of the foot and h…

…

[kishore_v2 (kishore v)]

i tried creating for 30x30x30 box with lattice size 4mm and it takes alot of time with given intralattice.

[laurent_delrieu]

Just writing it doesn’t work is not very useful. If you want real help, you need to explain and post some script

vhttps://discourse.mcneel.com/t/help-us-help-you/50034/