Help on simulating a hammered bronze panel

[Joseph_Oster]

Closed Curve as boundary for random points on a plane

You could internalize the geometry in your GH file, skipping the Rhino 6 file issue. And provide a screen shot at 100% standard size so the subtract and multiply components can be replaced. [spheres_Italy_2018Feb20a] spheres_Italy_2018Feb20a.gh (86.7 KB) WARNING!!! High ‘Sphere count’ (300) so SDiff takes ~48 seconds on the profiler, below! [spheres_Italy_2018Mar3a] spheres_Italy_2018Mar3a.gh (86.4 KB) [spheres_Italy_2018Mar3a2]

Create 4 to 5 edge mesh or network to recreate the example

I started with some old code but didn’t like it so hacked something new, from scratch. This uses intersecting spheres and requires some fiddling with parameters to avoid holes and short edges. There is no guarantee that each “scallop” will have 4 or 5 edges. [scallop_2023Jan22a] scallop_2023Jan22a.gh (23.2 KB)

Hammered Surface Texture - Reduce Depth/Seamless Join

Hello World, I am struggling to reduce the depth of the hammered texture once I use the surface morph to wrap the dimpled texture around my target surface. I am trying to figure out how to make the dimples on the surface shallower and then have them join so it is as close to seamless as possible, but I am stuck at this point. Any suggestions would be a huge help! [Screen Shot 2020-01-26 at 3.34.16 PM] Hammered Texture_Troubleshoot.gh (20.7 KB)