Sweep 1 or 2 Surfacing Question

[Tom_P]

… it would be great to have the simple-Sweep option back, as discussed at several threads/ topics in this forum - and it would be great to have an analytic feedback if it fails…- just search “simple sweep” and you will get many topics…

No simple sweep - command feedback / naming

dear mc neel dear community to discuss dear @pascal as we discussed: since rhino 6 we miss a simple sweep option in _sweep1 and _sweep2 we should get a simple sweep if it is possible. for complex surfaces or surfaces that will get modified after the initial sweep it is essential to get a simple sweep. In my opinion it would be very helpful to have some kind of feedback, if simple sweep fails: (A) my favourite would be an option in _sweep1 and _sweep2 simpleSweepFeedback = On/Off (B) a …

Sweep 1 Rail - Simple Sweep option removed in RH6?

Hi, I used the Simple Sweep option in the Sweep1 command a lot in Rhino 5 and this seems to have disappeared in Rhino 6. The option makes a swept polysurface as solid as you would get when created by extrude combined with revolve. A radius on construction curves remains also a radius on the edges. My experience is that eventual fillets added in a later stage do not give any trouble. Without this option it sometime does. [Simple%20sweep%20option%20RH5] I have looked at other posts referring t…

and others…

thanks for some improvements regarding those very basic surfacing commands.
kind regards - tom