[image] Is there a way to create a toposolid like this in Rhino Inside Revit? I did try to create the toposolid and then tried to create the void as a generic model but I just could´t do it, so I just created the whole geometry in grasshopper and exported it to revit as a directshape, but I was a…

Hi, ArqCast_S.A.S_Arquit Please put questions concerning Revit in the Rhino.Inside - Revit Forum Category. (i switched it for you) https://discourse.mcneel.com/t/help-us-help-you-rhino-inside-revit-edition/170291/9 Direct Shapes are not ‘real’ Revit Elements. You could put the DirectShape Elemen…

Thank you so much Japhy. I was also wondering if there is a way to create a VOID to then cut a toposolid in Revit?

“Ohh Japhy, thank you so much. But what I actually meant was creating the void inside Grasshopper and then cutting the toposolid in Revit. Would that be possible?”

[image] What I’m trying to do is to create this void in this toposolid. I added the points in the host shape, but I don’t get a rectilinear cut in the toposolid; instead, I get a slope. Also, I saw that there is a component called “Component Family Void” and I don’t know whether it’s appropriate …

Here’s a similar example. [image] What is the purpose of "void" component RiR? Revit Thanks, Try adding a Void to a new component generic model, then cut. It behaves nicely if its a Revit friendly curve. [WallVoid]

Thank you so much, Japhy. That worked. I could create the void, but now I am wondering if there is a way to place the void in the exact same position as in the Rhino model? I already read what you said in the other post: “Seeing as this is a one-off, you can create your Void Geometry in Rhino and …

The Revit and Rhino documents share the same origin location 0,0,0. Creating your Family in relation to this will allow you to place your Family at Revit 0,0 and be in the same location as Rhino. [image] Re_RiR_Family.gh (15.8 KB)

“Wowww!! Invaluable, Japhy, that was fantastic. I can’t thank you enough. Now I am able to complete my whole project in Rhino Inside Revit.” Thank you once again.

Create a toposolid with voids in RIR

Rhino.Inside Revit

Japhy (Japhy) May 11, 2024, 10:35am 7

Here’s a similar example.

Topic		Replies	Views
Create Toposolid Revit windows , python	20	3860	September 16, 2024
Problem with Creating Toposolid In Revit by RIR Revit windows , revit-2024 , rhino-inside	4	272	July 10, 2025
Traer Formas de Rhino a Revet como vacíos Revit windows	3	57	June 16, 2026
Create a toposolid and subdivisions using RiR Revit windows	10	323	August 28, 2026
Managing overhangs in TopoSolids in Revit Revit windows	4	138	March 6, 2025

Create a toposolid with voids in RIR

Related topics