Discretizing Geometry Based on Point Clusters for Robotic Fabrication

[laurent_delrieu]

Hello
I didn’t look at your script but I think these discussions could be useful

Split object into parts

Hello there was a discussion on this subject here Here I have tried another solution, it has some plugin, some of them could be skipped and other changed. But the logic is 1)Generate a solid brep/mesh of the object, I use here Dendro to close the mesh, it is not 100 % perfect but seems to work here. 2)Generate points inside the volume [image] 3)Cluster these points with K-Mean clustering for example [image] … 4)Calculate the center of the Cluster 5)Make a 3D Voronoi (intersection…

Split a Large Mesh for 3D Printing

[image] Instead of splitting the mesh, I think I would rather use Mesh Difference and subtract very thin boxes and at least one cylinder per plane. The cylinder is later used to reinforce the joint with a threaded rod. [image] SplitMeshFor3DPrint.gh (894.6 KB) PS: Your quad remesh had two internal voids. I deleted them.