[Help] Hello, is there a way to create this hatching (blue) in Grasshopper? However, the hatching should be output as a line, which should have 1mm distance to the red lines and 2mm distance to each other. The whole thing is to be used as a path for a 3D printer, which unfortunately cannot be op…

Hello Nautilus plugin can do it [image] First journey in 3D printing Gallery Some weeks ago I began my journey in the 3d printing world. The main job was to generate 3d printer paths from closed curves which represent the intersection between a slice (plane or not) and a…

Hi thanks again for the help, your plugin has worked really well so far. I work at the university with a clay 3D printer. In the last correction I was told that I should use the offset infill instead of the lines infill. However, the offset infill doesn’t really work for me. Do you have any ideas as…

Hello yes it doesn’t work on purpose. There must be a warning on components ? Components with a yellow square needs a licence. Go on food4rhino nautilus and look at the instruction. I could send you an evaluation licence for 15 days. here the results, better looking with slight decrease of toleran…

Create Lines for 3D printing

Grasshopper

laurent_delrieu (Laurent Delrieu) November 16, 2023, 10:17am 2

Hello
Nautilus plugin can do it

Topic		Replies	Views
First journey in 3D printing Gallery rhinocommon	14	4555	September 4, 2025
Curve middle line Grasshopper	43	6950	March 15, 2019
Preparing my Mandala for 3D Print Grasshopper windows	4	1674	February 24, 2021
WeaverSlicer Grasshopper windows	8	1072	August 7, 2024
Line thickness and Parakeet extrusion in Grasshopper Grasshopper extrude , mac , curve , rhino7 , parakeet	6	406	November 5, 2024

Create Lines for 3D printing

Related topics