Hi, V5 recreating an end cap of brass. I have established its as per the profile created when sectioned perp to a facet. ALL are 0.2 inch rad circles, two are tan to each other with quad at the start of the entire shape, at aft edge of the item. so then with the disc and hexagon I union them th…

[image] Steve1: any reason the green goes out the back, does this have a role to play in the process ? not really, it’s just a way of see things, short surfaces might make the fillet algorithm fails if there is not enough room… It probably would have worked without doing so. [image] Ste…

Hi, Step 1 and 2 done, I presumed the blue had to be a solid so I capped the back face and the front disc and joined to get a solid. then Fillet Surface allows me to pick just one face of green, then I have to pick the other face, (blue) and nothing good happens. I have never understood this too…

[image] Steve1: [hex and disc3] hex and disc3800×660 76.6 KB remove the “Trim” and “Extend” options

[image] Riccardo Majewski: (Actually, you can tweak this by extending the blue surface with Type=Line and bypass this problem…) Here using Fillet Edge command: [Fillet] 1 minute of work

And here the way with Fillet Surface and later trimming: [Fillet2]

Duplicate topic. please merge. [image] Is there a ball bearing roll along user defined edges fillet command? Rhino for Windows The fillet option exists and is called rolling ball. However in your case the fillet fails because of the narrow circle segments. You can trim th…

Another mute video where you can see the difference between: “manually” doing Fillet Surfaces > trimming > joining creating continuous surfaces with “Merge surfaces” command where the Fillet Edge will not fail. [Fillet3]

Hi Guys, Thanks for the replies will follow carefully and make notes in my ‘methods I am finding useful’ word doc ! see how to overcome inability to select more than one surface each part etc. [image] Martin Siegrist: Duplicate topic. please merge. @martinsiegrist I felt a post on just th…

[image] Steve1: …ball… I’m just a bit confused. I thought you’ve been using Rhino since V5 so that must be years and yet it seems you’re not aware of the rolling ball option in the fillet command…

Hi, I had assumed some sort of function like a rolling ball occurred by default, but with my attempts failing, clearly not. Looking through the fillet options, i see no rolling ball in the initial stages. [Fillet commands V5 RollingBall nothing at first stage] However I now see it at this stage…

0.2 inch rad chamfer fails to make a circle tan to circle shape

Rhino Rhino for Windows

martinsiegrist (Martin Siegrist) March 18, 2025, 11:34pm 9

Duplicate topic. please merge.

Topic		Replies	Views
Rhino BETA Feature: FilletSrf improvements Serengeti (Rhino BETA) filletsrf , chamfersrf	148	13498	July 15, 2026
Fillet fail, fairly easy case Rhino windows	49	1001	September 20, 2025
Why can't Rhino fillet this object? Rhino for Windows windows , fillet-edge	35	3313	May 24, 2026
Advanced Filleting Question - 5 Surfaces Meeting at a Point Rhino for Mac fillet	34	3426	May 2, 2022
Fillet Edge Problem - Rhino Beginner Rhino for Windows	32	6139	October 31, 2017

0.2 inch rad chamfer fails to make a circle tan to circle shape

Related topics