V8 Issue. Switching display mode while Detail view activating

[Japhy]

@Screamer

ATTENTION:
Desktop is using the slower, less reliable integrated graphics device and probably needs a configuration change.

There is only one monitor detected, but it’s connected to the slower, integrated graphics video port.

• Recommended: Unplug the monitor and plug it into one of the video ports on this device:
  [NVIDIA Quadro RTX 5000]

• Any hardware configuration or cabling changes you make will require that you restart Rhino.

The openGL should be on the 16gb video card, currently it’s on the 1gb.

Check your cabling, device manager as well as the graphic settings.

Soooo, you bought a laptop with hybrid graphics and rhino doesn't run right. READ THIS

Hybrid graphics laptops are more and more common if you buy a consumer grade machine. (I recommend buying a mobile workstation for professional modeling but these hybrid machines are quite prevalent in the consumer market, especially for students.) They tend to generate a TON of tech support here because of the way they are set up from the factory. Hybrid systems are built with 2 graphics processors. A low power graphics chip (typically Intel HD or UHD) and a high power graphics card. However…