Sweep1 creating undesired result

[Tom_P]

what result do you need / expect ?
check those topics

Why won't this geometry boolean difference or trim?

_sweep1 is able to handle this kind of profiles even around a rectangle [image] an alternative might be, to trim with a 45-degree curve… [image] to bring everything together: _polyline _trim _join delete one face (that does not follow the Profile _cap → closed polysurfae _mergeAllCoPlanarFaces (Edit) as @3dsynergy wrote below - it is also possible to use _shear (45 degree) to get some nice shape curves in the corner - then _loft (straight sections) (left: sweep1 ) (right: …

Need to create a custom Chamfer at specified degree

Howdy! I want to make a custom chamfer at 15° and 1" long. (Or any degree I set and any length). The idea is to recreate a router bit that matches that profile. (Look at the picture from Freud.) In this case the bit cutting surface is 1" long and it is what I want the drawer face to look like (2nd picture). Any suggesting from the smart folks on this forum? Thanks! [Chamfer] [Drawer]

Sweep1 Trim Issue

I’m attempting to recreate historical wood paneled millwork using Grasshopper and running into an issue with Sweep1. My grasshopper script basically sweeps two different profiles along a curve and creates inset panelling along the wall. The issue I’m running into is with Sweep1. When the wall curve (along which the profiles are swept) has a large outset section (as shown below), the swept profile will be trimmed properly: [Screenshot 2023-08-23 at 12.00.26 PM] [Screenshot 2023-08-23 at 12.…