Hi all, I am trying to transform a mesh to a surface, in which I try to project the points from mesh to a boundary surface and then rebuild the boundary surface. But I didn’t make it finally. It will be grateful if anyone can check my GH script. Another way I have tried is to use MeshtoNURB comman…

[image] hoganchan113: something weird happened that Rhino messing with 'ya! loosen up the ‘A’ input and you should be fine: [image] also swapped the ListItem for a discontinuity component, all that was is getting the ‘corners’ of the hull though was erratic - both corrections in blue rect…

Hi BVR, Thanks for the suggestion! HC

Hi @René_Corella Very impressive!! It seems that I still have a long way to go to familiar with Grasshopper. Thank you so much. Best, HC

hi @René_Corella When I try to convert another mesh to a surface, something weird happened. It cannot define the edge of the model and come up with (0,0,0). [meshtosurfacetest] mesh to surface_rev_test_1.3dm (2.0 MB) mesh to surface_rev_test_1.gh (18.4 KB) Best regards, HC

[image] ajarindia: Try Pufferfish Mesh to Polysurface component. Mesh to multi-faceted polysurface can be very simple but I didn’t bother to post this because the result is not a single surface, as required here. [mesh_brep_2020Aug19a] mesh_brep_2020Aug19a.gh (52.7 KB)

Hi @Joseph_Oster Thanks Joseph. Is there any method to transform it to the single-surface? Best, HC

Yeah. I even know this method (But still I’m learning a lot from you and other members here) to give him a quick solution I suggested Pufferfish component. As per @René_Corella reply the method I suggested also have some limitations. But I really love your approach you don’t use any plugins you try …

[image] hoganchan113: Is there any method to transform it to the single-surface? @René_Corella has provided a method that looks similar to an approach I’ve used before - intersecting a grid of vertical lines with a mesh and then using SrfGrid. It depends on a rectangular surface. …

[image] ajarindia: But I really love your approach you don’t use any plugins you try to provide all your solutions just with native grasshopper components that’s really fab. Whenever I need to have something without plugins your replies to thread really helps a lot. Keep going. Thanks and Regard…

Hi @René_Corella , It does work! I have learnt a lot from you and other members. Thanks a lot for teaching me the knowledge of this kind of work. Warm regards, HC

Hi all, I’ve tried to do the same with this mesh: [Capture d’écran 2022-05-16 à 13.55.15 (2)] I’ve got something wrong about the bang nodes : [Capture d’écran 2022-05-16 à 13.54.39] Any idea ? Sorry I’ve just started grasshopper :slight_smile: Please see attached the 3d model link (can’…

Mesh to surface/ Polysurface to single surface

Grasshopper

Alim_Battal1 (Alim Battal) April 15, 2024, 7:11am 23

Hi,

I have a similar problem to the one in this post. I have a mesh surface but want to convert it into a single surface. I need your assistance. Can you help me, please?

Sincerely,
for_Mr.Joseph.gh (24.5 KB)

Even Depth Emboss on Organic Meshes

Topic		Replies	Views
How convert multiple meshes to one surface Grasshopper	9	2966	January 16, 2019
Mesh to Surface Rhino for Windows	33	6516	May 17, 2020
Rebuilding a Surface and Mesh (Mesh to Surface Conversion) Grasshopper mac	17	2762	March 28, 2024
Need to convert a mesh or polysurface into a single surface Grasshopper polysurface , mac , mesh , surface , merge , grasshopperrhino	0	477	May 13, 2022
Mesh to surface Rhino for Windows windows , rhino7 , grasshopperrhino , rhino8	1	104	February 11, 2026

Mesh to surface/ Polysurface to single surface

Related topics