Hello everyone, i’m currently working on a Project that i need to convert into a single solid before exporting it to another software for calculations. With a similar model i used Boolean Union after i baked the relevant parts. The first model consisted of three solids and it worked perfectly fine.…

[Screenshot 2025-03-03 at 16.28.20] [image] Help Us Help You …minimal versions… ??? come on - please post something that is less spaghetti.

This is the end of the Model, right before exporting. How am i supposed to shorten it? I already marked the relevant part green.

[image] Marwan : to shorten it this is how you can isolate a problem to post it as “minimum version”: set parameters (“data” will do it) before the relevant / problematic part of your definition and internalize the data / geometry. relays and data-parameter double-click on the wires to inse…

Hi @Marwan1 , Did you check the message bubbles above the red (ie failing) components? They seem pretty clear to me… You can’t mix open and closed curves in a loft, so you are going to have to rethink your construction. Regards Jeremy

ok i think this sections fails because: the surface you re pulling to is “null” / does not exists. looks like you try to loft an open and an nearly closed curve bake both curves and check them in pure rhino. the visually closed curve is open by Curve end difference = 0.002 millimeters cap hole…

Thank you very much for your response. I don’t know why its red after i send it. But i have three closed curves and the loft workes the problem starts when i try to use boolean union with the solid it creates [Bildschirmfoto 2025-03-03 um 17.04.02]

Thank you for your time and effort. I added the pull curve because i thought there was a gap between the curve and the surface i want to union. but it didn’t change anything. when i hover over the output of join curves i have three closed curves i don’ know what went wrong after i send the file.

An alternative. But you need the Flexibility plugin. chamfer.gh (17.0 KB) [img1]

[image] Creating a Solid from surfaces or curves Grasshopper I assume the inner edges would remain sharp? Here’s a definition with hollow pipes: [image] Rotating the vertical pipe by 180 degrees seems to help avoid a naked edge problem on the second fillet operation. X…

Using Boolean Union to create a solid out of 7 solids

Grasshopper

Tom_P March 3, 2025, 3:29pm 3

???

come on - please post something that is less spaghetti.

Topic		Replies	Views
Boolean union not working between closed solids Rhino for Mac	1	400	November 24, 2020
Boolean union failed Rhino for Windows	5	1119	July 22, 2020
GH Creating one Solid (solid union and boolean union don't work) Grasshopper	1	442	November 27, 2020
Boolean Union- ONE MORE TIME Rhino for Windows	13	700	November 2, 2019
Project and Solid Union problems Grasshopper windows	11	1384	February 15, 2022

Using Boolean Union to create a solid out of 7 solids

???

Related topics