I am using Conveyor 4, Rhino 7 and Revit 2024. I am trying to use a Georeferenced OBJ prepared from an external source. I import the OBJ file into the prepared Rhino setup file (created by Proving Ground App plugin) This works fine, and the OBJ in Rhino is in its correct world coordinates based on…

Hi Pavel, I found a solution to this problem which is just moving the geometry that is created by Conveyor after it is created in the project. I posted the solution here where I was asking a different but related question. [image] Rhino to Revit coordinates issue Revit …

Is there room for improving the quality of the Mesh in Rhino before importing? MeshRepair command ? or a resampling with no small edges. If you can post an example we can take a look. Thanks

The mesh quality in Rhino is actually fine. Its however Revit processes this mesh, I believe that Conveyor leverages OpenNURBS but I dont really know much about how the back end processing into Revit changes it but Conveyor is able to build a very clean mesh in Revit, but direct shape does not. I …

Hi Craig, when you look at Top view, what are your mesh coordinates values in Rhino? Please note that Revit only implements a space inside a cube of 10 miles in each direction. If you try to import anything outside this cube, it´ll get constrained as you describe it - center to center. If your dat…

Hi Pavel, thanks for your answer. This is somewhat true, but directshape will in fact throw an element in its correct coordinates even if it is outside of this Revit “radius” you will get warnings in Revit but it will do it. In this case though, I have also tried inheriting coordinates from a geor…

also yes it is possible to extract the coordinates from parameters, I tested it this morning (just an FYI) and integrated it into my GH script. [image]

Hi @Craig_L , We introduced some changes on v1.12 to help in these cases. Which version of RiR are you using? Can you share the mesh with us? Please use this form and send it to “kike at mcneel.com ”.

For the version of RiR, I am not sure how to check it, but this is the .msi file name I used to install RhinoInside.Revit_1.18.8780.17023 It was only a recent install so I would assume it probably recent enough to cover the changes? looks like 1.18? As for the mesh, I can share it, do you just w…

[image] Craig_L: As for the mesh, I can share it, do you just want the mesh or the entire script? (I am using some Proving Ground components in the script) [image] Craig_L: The mesh quality in Rhino is actually fine. Its however Revit processes this mesh, I believe that Conveyor leverages…

Sent, let me know if there are issues.

Craig - That is quite a challenging mesh. If Revit 2023 or later is being used, the mesh looks clean. This was an update in Revit: [image] As for large coordinates, it is best to move the model closer to the origin. But I am not clear on the requirements you have in this case.

Rhino to Revit (Using Conveyor) Insertion issue

Rhino.Inside Revit

Japhy (Japhy) March 6, 2024, 1:28pm 16

Great to hear this is working for you. Direct Shapes are not ‘Real’ Revit Elements and have limitations, you’ll need to add a parameter.

Direct Shape Types Name is schedulable.

Topic		Replies	Views
Rhino to Revit coordinates issue Revit windows , plugins , rhino7 , rhinoinsiderevit	3	677	February 27, 2024
Shared Coordinate System Revit	50	9486	February 10, 2025
DirectShape - slow / weird behavior in latest release Revit windows	34	3964	June 2, 2021
Coordinate Issue when importing Rhino Geometry to Revit with Rhino.Inside Revit windows	1	861	July 19, 2022
How to Create Revit Floor from Rhino Topography Surface or Mesh Revit windows	69	7921	September 17, 2025

Rhino to Revit (Using Conveyor) Insertion issue

Related topics