# \#quad-remesh

**URL:** https://discourse.mcneel.com/tag/quad-remesh/1195.md

[Latest](https://discourse.mcneel.com/latest.md) · [Categories](https://discourse.mcneel.com/categories.md) · [Tags](https://discourse.mcneel.com/tags.md)

---

## [Quadremesh not working anymore ( Rhino8 and rhino9 Beta - MAC )](https://discourse.mcneel.com/t/quadremesh-not-working-anymore-rhino8-and-rhino9-beta-mac/223497)

<div class="topic-metadata">

**Author:** [@Bernhard\_H](https://discourse.mcneel.com/u/Bernhard_H)\
**Replies:** 1\
**Last updated:** [November 2, 2026, 11:56pm UTC](https://discourse.mcneel.com/t/quadremesh-not-working-anymore-rhino8-and-rhino9-beta-mac/223497 "2026-11-02T23:56:10Z")

</div>

Hello Rhino community. I use QuadRemesh quite often in my workflow, it worked perfectly fine, but has stopped since the last few weeks. ( no error codes or anything helpful. It just doesn’t do any thing when I apply the…

---

## [AI work flow ( Hunyuan2.5 / Sparc3D / PromeAi )](https://discourse.mcneel.com/t/ai-work-flow-hunyuan2-5-sparc3d-promeai/206915)

<div class="topic-metadata">

**Author:** [@MiguelBaron](https://discourse.mcneel.com/u/MiguelBaron)\
**Replies:** 1\
**Last updated:** [October 26, 2026, 4:57am UTC](https://discourse.mcneel.com/t/ai-work-flow-hunyuan2-5-sparc3d-promeai/206915 "2026-10-26T04:57:26Z")

</div>

pictures to AI 3D model (hunyuan2.5/ sparc3D)QuadRemesh+PromeAi hi comunity here im comparing hunyuan 2.5 with a car and sparc3d with architecture this one was used chat gpt

---

## [Quad remesh misses edge on open mesh](https://discourse.mcneel.com/t/quad-remesh-misses-edge-on-open-mesh/182298)

<div class="topic-metadata">

**Author:** [@sonny.bergenholtz](https://discourse.mcneel.com/u/sonny.bergenholtz)\
**Replies:** 25\
**Last updated:** [May 27, 2026, 11:33am UTC](https://discourse.mcneel.com/t/quad-remesh-misses-edge-on-open-mesh/182298 "2026-05-27T11:33:09Z")

</div>

Hi, Don’t know if this question has come up earlier and if so please direct me. When I try to quad remesh a mesh it misses some parts of the outer geometry. I have tried so many settings without a solid result that I …

---

## [How to model organic “dripping” liquid shapes for 3D printing](https://discourse.mcneel.com/t/how-to-model-organic-dripping-liquid-shapes-for-3d-printing/214012)

<div class="topic-metadata">

**Author:** [@KBV](https://discourse.mcneel.com/u/KBV)\
**Replies:** 7\
**Last updated:** [January 2, 2026, 11:42pm UTC](https://discourse.mcneel.com/t/how-to-model-organic-dripping-liquid-shapes-for-3d-printing/214012 "2026-01-02T23:42:33Z")

</div>

Hi everyone, I’m modelling a shape for 3D printing in Rhino 7 or 8 that should look like thick, viscous liquid / lava flowing out of a cube, similar to the attached reference images. My main challenge is findi…

---

## [How can my UV mapping stay the same when I use Quadremesh in Grasshopper](https://discourse.mcneel.com/t/how-can-my-uv-mapping-stay-the-same-when-i-use-quadremesh-in-grasshopper/209587)

<div class="topic-metadata">

**Author:** [@Shenaia\_Turner](https://discourse.mcneel.com/u/Shenaia_Turner)\
**Replies:** 3\
**Last updated:** [September 11, 2025, 1:17pm UTC](https://discourse.mcneel.com/t/how-can-my-uv-mapping-stay-the-same-when-i-use-quadremesh-in-grasshopper/209587 "2025-09-11T13:17:40Z")

</div>

I want to create a Grasshopper workflow that allows you to input a mesh, reduce and quad-remesh, and then reapply the same UV mapping. I know the mapping will be a bit warped but as long as its close to its approximate p…

---

## [How to make quad mesh faces follow the mesh edge smoothly?](https://discourse.mcneel.com/t/how-to-make-quad-mesh-faces-follow-the-mesh-edge-smoothly/208830)

<div class="topic-metadata">

**Author:** [@Urchuck](https://discourse.mcneel.com/u/Urchuck)\
**Replies:** 14\
**Last updated:** [August 23, 2025, 10:46am UTC](https://discourse.mcneel.com/t/how-to-make-quad-mesh-faces-follow-the-mesh-edge-smoothly/208830 "2025-08-23T10:46:48Z")

</div>

I have initial surface that I need to convert into quad mesh following Specific directions. I applied isocurves as guide curve so most of the meshing look correct, but I need an edge of relatively smooth row of mesh face…

---

## [Post-Processing of a topology optimized component](https://discourse.mcneel.com/t/post-processing-of-a-topology-optimized-component/206993)

<div class="topic-metadata">

**Author:** [@Samuel\_Missanelli](https://discourse.mcneel.com/u/Samuel_Missanelli)\
**Replies:** 4\
**Last updated:** [July 11, 2025, 4:17pm UTC](https://discourse.mcneel.com/t/post-processing-of-a-topology-optimized-component/206993 "2025-07-11T16:17:06Z")

</div>

Good afternoon everyone, my classmates and I are currently working on a university project (of a course called "Surface Modeling for Mechanical Engineering Applications), related to the post-processing of a topology opti…

---

## [How to sort mesh edges & vertices](https://discourse.mcneel.com/t/how-to-sort-mesh-edges-vertices/201153)

<div class="topic-metadata">

**Author:** [@Amey\_Desai](https://discourse.mcneel.com/u/Amey_Desai)\
**Replies:** 0\
**Last updated:** [March 11, 2025, 5:53pm UTC](https://discourse.mcneel.com/t/how-to-sort-mesh-edges-vertices/201153 "2025-03-11T17:53:56Z")

</div>

Hi, I have created a skin with kangaroo which resulted in mesh. But the vertices & edges are not sorted. I want to sort them such as i can get horizontal rings & vertical lines separate. to use them for creating frames. …

---

## [Export Planar Mesh to Tiff](https://discourse.mcneel.com/t/export-planar-mesh-to-tiff/200969)

<div class="topic-metadata">

**Author:** [@NTT](https://discourse.mcneel.com/u/NTT)\
**Replies:** 0\
**Last updated:** [March 8, 2025, 12:43pm UTC](https://discourse.mcneel.com/t/export-planar-mesh-to-tiff/200969 "2025-03-08T12:43:13Z")

</div>

Dear Community How would it be possible to write a python script in grasshopper to export a tiff file from a planar mesh and a polyline as image boundary (w x h)? the boundary could have a white fill and the image resol…

---

## [QuadRemesh target edge length increment](https://discourse.mcneel.com/t/quadremesh-target-edge-length-increment/136168)

<div class="topic-metadata">

**Author:** [@martinsiegrist](https://discourse.mcneel.com/u/martinsiegrist)\
**Replies:** 16\
**Last updated:** [September 26, 2024, 7:17pm UTC](https://discourse.mcneel.com/t/quadremesh-target-edge-length-increment/136168 "2024-09-26T19:17:47Z")

</div>

My units are millimeters with 0.001 units absolute tolerance. When using the QuadRemesh command I often prefer to try a specific target edge length. I might start with 5 or 10 or any integer. Clicking the arrows or tap…

---

## [Recovering sharp edges from ShrinkWrap through SubD](https://discourse.mcneel.com/t/recovering-sharp-edges-from-shrinkwrap-through-subd/185205)

<div class="topic-metadata">

**Author:** [@Christian\_Rohr](https://discourse.mcneel.com/u/Christian_Rohr)\
**Replies:** 2\
**Last updated:** [June 25, 2024, 7:48pm UTC](https://discourse.mcneel.com/t/recovering-sharp-edges-from-shrinkwrap-through-subd/185205 "2024-06-25T19:48:23Z")

</div>

We are often manually redrafting complex buildings from the AEC industry for our own applications, which require very clean solid geometry and small details removed. The ShrinkWrapper can be useful in some cases, but app…

---

## [How to achieve quad mesh like thermal field on a sphere with holes?](https://discourse.mcneel.com/t/how-to-achieve-quad-mesh-like-thermal-field-on-a-sphere-with-holes/187805)

<div class="topic-metadata">

**Author:** [@Crackmina](https://discourse.mcneel.com/u/Crackmina)\
**Replies:** 27\
**Last updated:** [July 16, 2024, 2:16pm UTC](https://discourse.mcneel.com/t/how-to-achieve-quad-mesh-like-thermal-field-on-a-sphere-with-holes/187805 "2024-07-16T14:16:47Z")

</div>

Hi all . I wanna achieve this pattern on image 2 into the geometry of image 1. What tools can you suggest me to use ? I was learning kangaroo but its mainly used for minimal surfaces with catenoids and so on .

---

## [Enhancing Quad Remesher: Feedback and Suggestions](https://discourse.mcneel.com/t/enhancing-quad-remesher-feedback-and-suggestions/182344)

<div class="topic-metadata">

**Author:** [@ata.safarzadeh1990](https://discourse.mcneel.com/u/ata.safarzadeh1990)\
**Replies:** 2\
**Last updated:** [May 19, 2024, 12:24pm UTC](https://discourse.mcneel.com/t/enhancing-quad-remesher-feedback-and-suggestions/182344 "2024-05-19T12:24:42Z")

</div>

I’ve been using Quad Remesher in Rhino for a while and have identified several areas where the tool could be significantly improved. I’d like to share my observations and gather feedback from the community and developers…

---

## [Smoothing Dendro mesh with QuadRemesh (failing from too many faces?)](https://discourse.mcneel.com/t/smoothing-dendro-mesh-with-quadremesh-failing-from-too-many-faces/179434)

<div class="topic-metadata">

**Author:** [@Anthony\_Nguyen](https://discourse.mcneel.com/u/Anthony_Nguyen)\
**Replies:** 2\
**Last updated:** [April 5, 2024, 10:38pm UTC](https://discourse.mcneel.com/t/smoothing-dendro-mesh-with-quadremesh-failing-from-too-many-faces/179434 "2024-04-05T22:38:55Z")

</div>

I’m starting with a set of curves that I use to create a volume via Dendro, but the output mesh is not as smooth as I’d like since I want to send it to a resin printer. I’m trying to use quadremesh (starting at 50% adapt…

---

## [Mesh Compatibility at intersection between 2 surfaces](https://discourse.mcneel.com/t/mesh-compatibility-at-intersection-between-2-surfaces/177969)

<div class="topic-metadata">

**Author:** [@nguyentiencuong](https://discourse.mcneel.com/u/nguyentiencuong)\
**Replies:** 5\
**Last updated:** [March 15, 2024, 8:02am UTC](https://discourse.mcneel.com/t/mesh-compatibility-at-intersection-between-2-surfaces/177969 "2024-03-15T08:02:53Z")

</div>

What is the procedure for automatically creating a mesh of two surfaces that is compatible at their intersection? For instance, the mesh shown below is incompatible, which is unsuitable for finite element analysis at a l…

---

## [QuadRemesh restrained to surface edges (Grasshopper)](https://discourse.mcneel.com/t/quadremesh-restrained-to-surface-edges-grasshopper/177828)

<div class="topic-metadata">

**Author:** [@s.eliasson89](https://discourse.mcneel.com/u/s.eliasson89)\
**Replies:** 3\
**Last updated:** [March 13, 2024, 11:38am UTC](https://discourse.mcneel.com/t/quadremesh-restrained-to-surface-edges-grasshopper/177828 "2024-03-13T11:38:06Z")

</div>

I would like to find a way to create a quadrilateral mesh of a planar brep consisting of multiple surfaces. I would like the mesh to adjust to the existing surface edges. This is possible in Rhino using QuadRemesh, but I…

---

## [QuadRemesh fails to produce results](https://discourse.mcneel.com/t/quadremesh-fails-to-produce-results/131390)

<div class="topic-metadata">

**Author:** [@atelierfabien](https://discourse.mcneel.com/u/atelierfabien)\
**Replies:** 9\
**Last updated:** [February 27, 2024, 12:16am UTC](https://discourse.mcneel.com/t/quadremesh-fails-to-produce-results/131390 "2024-02-27T00:16:24Z")

</div>

I’m working on a fairly complicated closed mesh that has been scanned and cleaned up using Geomagic. The project is under NDA so I cannot actually show it here, but I’d be able to share with McNeel staff if necessary. N…

---

## [Mesh Difference and Quad Remesh are not working](https://discourse.mcneel.com/t/mesh-difference-and-quad-remesh-are-not-working/174369)

<div class="topic-metadata">

**Author:** [@sadovshikov](https://discourse.mcneel.com/u/sadovshikov)\
**Replies:** 6\
**Last updated:** [January 30, 2024, 8:25am UTC](https://discourse.mcneel.com/t/mesh-difference-and-quad-remesh-are-not-working/174369 "2024-01-30T08:25:28Z")

</div>

I have a simple triangular mesh that has been capped using the “Mesh Cap” component, and I would like to subtract it with cylindrical meshes using the Mesh Difference component, but I end up with a rather ugly output mes…

---

## [Mesh compatibility between 2 surfaces](https://discourse.mcneel.com/t/mesh-compatibility-between-2-surfaces/172973)

<div class="topic-metadata">

**Author:** [@nguyentiencuong](https://discourse.mcneel.com/u/nguyentiencuong)\
**Replies:** 3\
**Last updated:** [January 10, 2024, 3:20am UTC](https://discourse.mcneel.com/t/mesh-compatibility-between-2-surfaces/172973 "2024-01-10T03:20:20Z")

</div>

I have two surfaces (i.e. 2 pipes intersecting Pipe Intersection.3dm (366.8 KB) one another) in Rhino and need to mesh them in a way that ensures compatibility at the intersection between the two faces. In other words,…

---

## [Quad Remesh fail with sucessful preview](https://discourse.mcneel.com/t/quad-remesh-fail-with-sucessful-preview/171352)

<div class="topic-metadata">

**Author:** [@cameronbehning](https://discourse.mcneel.com/u/cameronbehning)\
**Replies:** 13\
**Last updated:** [December 13, 2023, 12:18pm UTC](https://discourse.mcneel.com/t/quad-remesh-fail-with-sucessful-preview/171352 "2023-12-13T12:18:06Z")

</div>

I have a very dense mesh object that I need to make into a subd for processing. (Rendered model preivew) I’m trying to use quad-remesh to make the subD. I am able to successfully preview the geometry in the quad-rem…

---

## ['Smart' mesh thicken (ok to sacrifice even thickness)](https://discourse.mcneel.com/t/smart-mesh-thicken-ok-to-sacrifice-even-thickness/170053)

<div class="topic-metadata">

**Author:** [@Gears\_Gears](https://discourse.mcneel.com/u/Gears_Gears)\
**Replies:** 2\
**Last updated:** [December 6, 2023, 2:19am UTC](https://discourse.mcneel.com/t/smart-mesh-thicken-ok-to-sacrifice-even-thickness/170053 "2023-12-06T02:19:13Z")

</div>

Hi! I notice that when thickness is high, the mesh thickening fails (gives bad results, vertices run into faces). How can I thicken ‘smartly,’ sacrificing even thickness for correct result when needed? (this would be per…

---

## [QuadRemesh settings for hard shape models](https://discourse.mcneel.com/t/quadremesh-settings-for-hard-shape-models/137254)

<div class="topic-metadata">

**Author:** [@sadovshikov](https://discourse.mcneel.com/u/sadovshikov)\
**Replies:** 15\
**Last updated:** [November 27, 2023, 11:47am UTC](https://discourse.mcneel.com/t/quadremesh-settings-for-hard-shape-models/137254 "2023-11-27T11:47:28Z")

</div>

I am testing a relatively new feature the “QuadRemesh” through the grasshopper eponymous “QuadRemesh” component. My goal is to generate a quad mesh base on a Brep so that the hard edges of the Brep will be preserved in t…

---

## [Generative sculpture](https://discourse.mcneel.com/t/generative-sculpture/164697)

<div class="topic-metadata">

**Author:** [@mohammad\_khansari](https://discourse.mcneel.com/u/mohammad_khansari)\
**Replies:** 4\
**Last updated:** [September 9, 2023, 12:54pm UTC](https://discourse.mcneel.com/t/generative-sculpture/164697 "2023-09-09T12:54:46Z")

</div>

Here is my another Generative sculpture using the effects of a curve on a mesh and how it reacts to it!

---

## [Deform mesh internal edges without changing the shape](https://discourse.mcneel.com/t/deform-mesh-internal-edges-without-changing-the-shape/97366)

<div class="topic-metadata">

**Author:** [@dessiree.chavez](https://discourse.mcneel.com/u/dessiree.chavez)\
**Replies:** 25\
**Last updated:** [September 3, 2023, 9:07pm UTC](https://discourse.mcneel.com/t/deform-mesh-internal-edges-without-changing-the-shape/97366 "2023-09-03T21:07:59Z")

</div>

hello lords of GH I hope your can help me I have this coloured mesh that essentially represents an structural behaviour. This mesh as a normal mesh is divided in UV rows and columns that i need to keep. What I desperat…

---

## [Bug: Quad Remesh with circular curve as edge loop](https://discourse.mcneel.com/t/bug-quad-remesh-with-circular-curve-as-edge-loop/162071)

<div class="topic-metadata">

**Author:** [@RK1](https://discourse.mcneel.com/u/RK1)\
**Replies:** 1\
**Last updated:** [June 27, 2023, 12:31pm UTC](https://discourse.mcneel.com/t/bug-quad-remesh-with-circular-curve-as-edge-loop/162071 "2023-06-27T12:31:59Z")

</div>

Hello all, Very simple example: I’m trying to remesh a sphere brep and I have an additional circular curve along its surface (via sphere-cylinder intersection). I am running Quad Remesh and providing the curve as a guid…

---

## [Suggested file format for storing quad mesh after QuadRemesh function](https://discourse.mcneel.com/t/suggested-file-format-for-storing-quad-mesh-after-quadremesh-function/161612)

<div class="topic-metadata">

**Author:** [@Aravind\_Karthik\_Mura](https://discourse.mcneel.com/u/Aravind_Karthik_Mura)\
**Replies:** 2\
**Last updated:** [June 22, 2023, 4:14pm UTC](https://discourse.mcneel.com/t/suggested-file-format-for-storing-quad-mesh-after-quadremesh-function/161612 "2023-06-22T16:14:04Z")

</div>

Hello community! I am trying to convert a NURBS body to all-quad body using the QuadRemesh functionality (for CFD applications). The objective is to do CFD meshing in Salome meshing tool. Post conversion, what is the su…

---

## [Reconstructing Mesh Quads? Blender import into Rhino/Gh](https://discourse.mcneel.com/t/reconstructing-mesh-quads-blender-import-into-rhino-gh/161150)

<div class="topic-metadata">

**Author:** [@Jaspal.U](https://discourse.mcneel.com/u/Jaspal.U)\
**Replies:** 3\
**Last updated:** [June 8, 2023, 1:46am UTC](https://discourse.mcneel.com/t/reconstructing-mesh-quads-blender-import-into-rhino-gh/161150 "2023-06-08T01:46:20Z")

</div>

Quad reMesh.gh (1.1 MB) Hi, thanks for dropping by this topic! I am working towards fabricating my sculpture model. My sculpture is initially modelled in Blender and then imported as .iges (NURBS) into Rhino. I planariz…

---

## [Quad Remesh Breaks the Mesh Lines Near Edges](https://discourse.mcneel.com/t/quad-remesh-breaks-the-mesh-lines-near-edges/160879)

<div class="topic-metadata">

**Author:** [@Lena\_Ahmed](https://discourse.mcneel.com/u/Lena_Ahmed)\
**Replies:** 4\
**Last updated:** [June 2, 2023, 11:28am UTC](https://discourse.mcneel.com/t/quad-remesh-breaks-the-mesh-lines-near-edges/160879 "2023-06-02T11:28:12Z")

</div>

When I connect the geometry to quad remesh component, I get this result on both the top and bottom of the geometry! It seems like lines are suddenly broken near the edges Does anyone know how can I solve this? I use…

---

## [Quad remesh retain mesh shape](https://discourse.mcneel.com/t/quad-remesh-retain-mesh-shape/159527)

<div class="topic-metadata">

**Author:** [@jobdvogel](https://discourse.mcneel.com/u/jobdvogel)\
**Replies:** 5\
**Last updated:** [May 8, 2023, 12:11pm UTC](https://discourse.mcneel.com/t/quad-remesh-retain-mesh-shape/159527 "2023-05-08T12:11:38Z")

</div>

Hi community, I have the following problem with the quad remesh component. I am trying to quad remesh a high number of meshes (walls of a rough building). My goal is to get a mesh with approximately square faces, but st…

---

## [What is the definition of planarity?](https://discourse.mcneel.com/t/what-is-the-definition-of-planarity/158996)

<div class="topic-metadata">

**Author:** [@AlexWer](https://discourse.mcneel.com/u/AlexWer)\
**Replies:** 1\
**Last updated:** [April 27, 2023, 10:47am UTC](https://discourse.mcneel.com/t/what-is-the-definition-of-planarity/158996 "2023-04-27T10:47:37Z")

</div>

Hello Guys please tell me how to correctly determine planarity for 4,5,6 squares and so on? maybe some literature? all the same, how is it more correct to obtain the absolute value of the deviation or the relative val…

[Next page](https://discourse.mcneel.com/tag/quad-remesh/1195.md?match_all_tags=true&page=1&tags%5B%5D=quad-remesh)
