# \#project

**URL:** https://discourse.mcneel.com/tag/project/188.md

[Latest](https://discourse.mcneel.com/latest.md) · [Categories](https://discourse.mcneel.com/categories.md) · [Tags](https://discourse.mcneel.com/tags.md)

---

## [Project on trimmed surface](https://discourse.mcneel.com/t/project-on-trimmed-surface/224960)

<div class="topic-metadata">

**Author:** [@Jeanne\_HATIER](https://discourse.mcneel.com/u/Jeanne_HATIER)\
**Replies:** 1\
**Last updated:** [November 22, 2026, 5:06pm UTC](https://discourse.mcneel.com/t/project-on-trimmed-surface/224960 "2026-11-22T17:06:10Z")

</div>

Hi ! I would like to project these roads (trimmed surfaces) on the floor (also trimmed surfaces). I extract this topography from topoexport and so project on trimmed surface doesn’t seem to work, how can I resolve this p…

---

## [Critical request for the "Project" command](https://discourse.mcneel.com/t/critical-request-for-the-project-command/210850)

<div class="topic-metadata">

**Author:** [@Rhino\_Bulgaria](https://discourse.mcneel.com/u/Rhino_Bulgaria)\
**Replies:** 17\
**Last updated:** [June 7, 2026, 5:22pm UTC](https://discourse.mcneel.com/t/critical-request-for-the-project-command/210850 "2026-06-07T17:22:04Z")

</div>

I had numerous cases where I lost important input curves after I projected them onto surfaces, due to the “DeleteInput=Yes” option being persistent across the Rhino sessions (Rhino 7). My suggestion is to either make tha…

---

## [Rounded curves turning square when projected onto surface](https://discourse.mcneel.com/t/rounded-curves-turning-square-when-projected-onto-surface/218046)

<div class="topic-metadata">

**Author:** [@jake\_courtenay](https://discourse.mcneel.com/u/jake_courtenay)\
**Replies:** 4\
**Last updated:** [April 15, 2026, 2:19pm UTC](https://discourse.mcneel.com/t/rounded-curves-turning-square-when-projected-onto-surface/218046 "2026-04-15T14:19:53Z")

</div>

Hi Guys, I have ran into an issue i haven’t had before with the project command. When I project the above curve onto the surface below, the curve suddenly changes to weird sharp angles. I have never had issues with …

---

## [Dimensions Not Aligning with Desired Plane in Section/Elevation View](https://discourse.mcneel.com/t/dimensions-not-aligning-with-desired-plane-in-section-elevation-view/204901)

<div class="topic-metadata">

**Author:** [@Gustavo\_Soares\_Silva](https://discourse.mcneel.com/u/Gustavo_Soares_Silva)\
**Replies:** 3\
**Last updated:** [May 22, 2025, 6:33pm UTC](https://discourse.mcneel.com/t/dimensions-not-aligning-with-desired-plane-in-section-elevation-view/204901 "2025-05-22T18:33:33Z")

</div>

Hi everyone, I’m having trouble placing dimensions (“Dims”) on a specific plane. Here’s the situation: I set the CPlane to the desired plane in a 3D view and, when I place dimensions from that 3D view with Project enab…

---

## [How to project brep onto a curved surface](https://discourse.mcneel.com/t/how-to-project-brep-onto-a-curved-surface/110254)

<div class="topic-metadata">

**Author:** [@computate.design](https://discourse.mcneel.com/u/computate.design)\
**Replies:** 3\
**Last updated:** [January 25, 2025, 12:12am UTC](https://discourse.mcneel.com/t/how-to-project-brep-onto-a-curved-surface/110254 "2025-01-25T00:12:33Z")

</div>

Hi all, I created planar breps which I would like to project onto a curved surface. Just like the project curve node, but now project brep. Please see attached screenshot. I don’t mind meshing before projecting. Anythi…

---

## [Grasshopper multipipe not working on projected voronoi curves](https://discourse.mcneel.com/t/grasshopper-multipipe-not-working-on-projected-voronoi-curves/196621)

<div class="topic-metadata">

**Author:** [@Falera\_van\_Balen](https://discourse.mcneel.com/u/Falera_van_Balen)\
**Replies:** 10\
**Last updated:** [December 18, 2024, 1:48pm UTC](https://discourse.mcneel.com/t/grasshopper-multipipe-not-working-on-projected-voronoi-curves/196621 "2024-12-18T13:48:36Z")

</div>

Hi there, MAIN PROBLEM: I’ve been trying to find solutions within my script to make the multipipe component work properly, but I keep getting the error message; Solution exception:points must at least contain one point.…

---

## [Arc curve array not projecting properly on a split lofted surface](https://discourse.mcneel.com/t/arc-curve-array-not-projecting-properly-on-a-split-lofted-surface/195153)

<div class="topic-metadata">

**Author:** [@freireich77](https://discourse.mcneel.com/u/freireich77)\
**Replies:** 3\
**Last updated:** [November 20, 2024, 9:27pm UTC](https://discourse.mcneel.com/t/arc-curve-array-not-projecting-properly-on-a-split-lofted-surface/195153 "2024-11-20T21:27:35Z")

</div>

Hi I have a lofted surface that i have used Surface Split to remove the area between some other curves. When I project an array of curves onto the split surface I am getting a strange result where curves don’t extend…

---

## [From 3d trees to 2d simplified circles](https://discourse.mcneel.com/t/from-3d-trees-to-2d-simplified-circles/190653)

<div class="topic-metadata">

**Author:** [@fabio.bari](https://discourse.mcneel.com/u/fabio.bari)\
**Replies:** 8\
**Last updated:** [September 5, 2024, 12:56pm UTC](https://discourse.mcneel.com/t/from-3d-trees-to-2d-simplified-circles/190653 "2024-09-05T12:56:49Z")

</div>

Hi! I wanted to know a way to convert 3D trees into circles on the C plane. My idea was to create a bounding box and inscribe a circle in the center of the base of the box. The trees all have different sizes, so ideally …

---

## [Projecting mutiple curves onto multiple surfaces](https://discourse.mcneel.com/t/projecting-mutiple-curves-onto-multiple-surfaces/182598)

<div class="topic-metadata">

**Author:** [@Mathias4](https://discourse.mcneel.com/u/Mathias4)\
**Replies:** 4\
**Last updated:** [May 23, 2024, 7:57am UTC](https://discourse.mcneel.com/t/projecting-mutiple-curves-onto-multiple-surfaces/182598 "2024-05-23T07:57:02Z")

</div>

Hey hoping someone can help me here. I have mulitple curves that i want to project onto multiple surfaces. I wish for the lines to stop when they hit a surfaces, so that they dont project onto the surfaces beneath it, …

---

## [Plug-in created with Script Editor won't run after last Rhino 8 update](https://discourse.mcneel.com/t/plug-in-created-with-script-editor-wont-run-after-last-rhino-8-update/178941)

<div class="topic-metadata">

**Author:** [@crtn-hrd](https://discourse.mcneel.com/u/crtn-hrd)\
**Replies:** 5\
**Last updated:** [March 29, 2024, 5:35pm UTC](https://discourse.mcneel.com/t/plug-in-created-with-script-editor-wont-run-after-last-rhino-8-update/178941 "2024-03-29T17:35:58Z")

</div>

Hi, I have created a plug-in through the new Script Editor Project Publisher. It was published to YAK (under the name “Jester”) and everything was fine since the previous update of Rhino 8. Since then the plug-in’s fun…

---

## [Flatten model components (simple "flat" boxes) into co-planar rectangles](https://discourse.mcneel.com/t/flatten-model-components-simple-flat-boxes-into-co-planar-rectangles/148555)

<div class="topic-metadata">

**Author:** [@Joe\_Binck](https://discourse.mcneel.com/u/Joe_Binck)\
**Replies:** 5\
**Last updated:** [March 3, 2024, 9:21pm UTC](https://discourse.mcneel.com/t/flatten-model-components-simple-flat-boxes-into-co-planar-rectangles/148555 "2024-03-03T21:21:53Z")

</div>

So, I design kitchens, and I’m trying to figure out a way to easily take a fully modeled set of cabinets (modeled with every piece of plywood and wood as individual polysurfaces) and turn those into 2D rectangles (or at …

---

## [Project individual curves onto separate planes along Z axis](https://discourse.mcneel.com/t/project-individual-curves-onto-separate-planes-along-z-axis/170468)

<div class="topic-metadata">

**Author:** [@Walter\_Drillon](https://discourse.mcneel.com/u/Walter_Drillon)\
**Replies:** 10\
**Last updated:** [December 1, 2023, 10:16pm UTC](https://discourse.mcneel.com/t/project-individual-curves-onto-separate-planes-along-z-axis/170468 "2023-12-01T22:16:25Z")

</div>

Hi all, could you help me on that? I have a grid of points, some of which share their Z axis with a plane. When this condition is fulfilled, I want these points to be attributed their corresponding plane’s Z coordinate…

---

## [Project individual curves onto separate planes along Z axis](https://discourse.mcneel.com/t/project-individual-curves-onto-separate-planes-along-z-axis/170374)

<div class="topic-metadata">

**Author:** [@Walter\_Drillon](https://discourse.mcneel.com/u/Walter_Drillon)\
**Replies:** 1\
**Last updated:** [November 30, 2023, 3:09pm UTC](https://discourse.mcneel.com/t/project-individual-curves-onto-separate-planes-along-z-axis/170374 "2023-11-30T15:09:48Z")

</div>

Hello everyone, I need some help to solve this: I have a 2D array of curves, some of which share their Z axis with a plane. When this condition is met, I want each one of these curves to be projected separately onto t…

---

## [Move Geometry on Topography ( Surface)](https://discourse.mcneel.com/t/move-geometry-on-topography-surface/87356)

<div class="topic-metadata">

**Author:** [@FedeGS](https://discourse.mcneel.com/u/FedeGS)\
**Replies:** 13\
**Last updated:** [September 2, 2023, 10:07am UTC](https://discourse.mcneel.com/t/move-geometry-on-topography-surface/87356 "2023-09-02T10:07:54Z")

</div>

Hello everyone, I have this problem, I have an urban division distributed over a 2D surface (Photo Distribution file attached) and I would like to move it to the actual topography (photo Topography attached file), can a…

---

## [Projecting lines in sight using Gh](https://discourse.mcneel.com/t/projecting-lines-in-sight-using-gh/160508)

<div class="topic-metadata">

**Author:** [@Ryan14](https://discourse.mcneel.com/u/Ryan14)\
**Replies:** 0\
**Last updated:** [May 25, 2023, 3:13pm UTC](https://discourse.mcneel.com/t/projecting-lines-in-sight-using-gh/160508 "2023-05-25T15:13:19Z")

</div>

Ok so I am trying to get all the geometry in sight. For example when you are viewing an object in rendered or shaded views you cannot see the internal lines. Like this (No hatches though) The problem I am having is …

---

## ["Project" point through mesh](https://discourse.mcneel.com/t/project-point-through-mesh/160099)

<div class="topic-metadata">

**Author:** [@yhudak](https://discourse.mcneel.com/u/yhudak)\
**Replies:** 3\
**Last updated:** [May 22, 2023, 10:16am UTC](https://discourse.mcneel.com/t/project-point-through-mesh/160099 "2023-05-22T10:16:23Z")

</div>

I have a model with multiple closed meshes. There is also a point in between these meshes. For simplicity’s sake, the meshes represent a ribcage and the point represents the centroid of a lung tumor. I essentially am loo…

---

## [SR - Display Pipeline Bug](https://discourse.mcneel.com/t/sr-display-pipeline-bug/159687)

<div class="topic-metadata">

**Author:** [@walther](https://discourse.mcneel.com/u/walther)\
**Replies:** 5\
**Last updated:** [May 11, 2023, 2:52pm UTC](https://discourse.mcneel.com/t/sr-display-pipeline-bug/159687 "2023-05-11T14:52:33Z")

</div>

I just installed the latest SR candidate for R7… Display pipeline seems to be messed up, looks like it is displaying vertex colors ?

---

## [Project curve to the mesh](https://discourse.mcneel.com/t/project-curve-to-the-mesh/157494)

<div class="topic-metadata">

**Author:** [@Dmitry\_Korchemny](https://discourse.mcneel.com/u/Dmitry_Korchemny)\
**Replies:** 5\
**Last updated:** [April 2, 2023, 2:48pm UTC](https://discourse.mcneel.com/t/project-curve-to-the-mesh/157494 "2023-04-02T14:48:54Z")

</div>

Hi everybody! I want to project curve to mesh with parametric slope 1:X. It is easy to do it in civil, but i think it can be done in rhino+grasshopper How can i do this? I will be glad of any help ERROR 23-04-1.gh (…

---

## [Bug Project](https://discourse.mcneel.com/t/bug-project/152170)

<div class="topic-metadata">

**Author:** [@nsgma](https://discourse.mcneel.com/u/nsgma)\
**Replies:** 2\
**Last updated:** [December 16, 2022, 6:34pm UTC](https://discourse.mcneel.com/t/bug-project/152170 "2022-12-16T18:34:08Z")

</div>

When projecting without deleting the input, with outpuLayer to Current, it stays in the layer of the input surface. N

---

## [Project - fail - not conforming](https://discourse.mcneel.com/t/project-fail-not-conforming/151417)

<div class="topic-metadata">

**Author:** [@precisionart](https://discourse.mcneel.com/u/precisionart)\
**Replies:** 0\
**Last updated:** [November 30, 2022, 9:50pm UTC](https://discourse.mcneel.com/t/project-fail-not-conforming/151417 "2022-11-30T21:50:31Z")

</div>

Projection Fail.3dm (635.3 KB) Having some issues with “Project”. the one on the left wont conform to the surface once projected. The one on the right will. if i remove or tweak the edges on the one on the right b…

---

## [Rhino Project Retain Layers](https://discourse.mcneel.com/t/rhino-project-retain-layers/137405)

<div class="topic-metadata">

**Author:** [@bob7d](https://discourse.mcneel.com/u/bob7d)\
**Replies:** 2\
**Last updated:** [February 3, 2022, 8:50pm UTC](https://discourse.mcneel.com/t/rhino-project-retain-layers/137405 "2022-02-03T20:50:48Z")

</div>

Hi All, I’ve been working on a somewhat complicated topography piece with both 2D GIS data and 3D topography data and I was wondering if there’s a easy way for the project cmd to retain the original layers of the curves…

---

## ["Project" command direction only CPlaneZ](https://discourse.mcneel.com/t/project-command-direction-only-cplanez/137144)

<div class="topic-metadata">

**Author:** [@Daniel\_Krajnik](https://discourse.mcneel.com/u/Daniel_Krajnik)\
**Replies:** 4\
**Last updated:** [January 30, 2022, 12:44pm UTC](https://discourse.mcneel.com/t/project-command-direction-only-cplanez/137144 "2022-01-30T12:44:55Z")

</div>

Is it possible in the “Project” command to specify other axes of the current Cplane for the projection direction (e.g. Y and X)? Options in the command seem to be only “CPlaneZ, View and Custom” at the moment and I can’t…

---

## [Project curves to asymmetric surface](https://discourse.mcneel.com/t/project-curves-to-asymmetric-surface/136218)

<div class="topic-metadata">

**Author:** [@ehsan.anvary](https://discourse.mcneel.com/u/ehsan.anvary)\
**Replies:** 5\
**Last updated:** [January 25, 2022, 11:45am UTC](https://discourse.mcneel.com/t/project-curves-to-asymmetric-surface/136218 "2022-01-25T11:45:33Z")

</div>

Hi there In a research activity in the field of plastic surgery, I face a problem in modeling. I want to fill the outer surface of the breast with the curves that follow the Fibonacci sequence, I create these curves in …

---

## [Projecting a lot of control points is too laggy](https://discourse.mcneel.com/t/projecting-a-lot-of-control-points-is-too-laggy/131435)

<div class="topic-metadata">

**Author:** [@hamed.desighn](https://discourse.mcneel.com/u/hamed.desighn)\
**Replies:** 29\
**Last updated:** [October 27, 2021, 12:20pm UTC](https://discourse.mcneel.com/t/projecting-a-lot-of-control-points-is-too-laggy/131435 "2021-10-27T12:20:50Z")

</div>

Hi , projecting a lot of control points (250K) of a mesh or surface into a polysurface is taking for ever , i have a very powerful computer , and tested out with other softwares it was fast , but rhino wasn’t that fast ,…

---

## [How can I project something into something else?](https://discourse.mcneel.com/t/how-can-i-project-something-into-something-else/132291)

<div class="topic-metadata">

**Author:** [@japel22870](https://discourse.mcneel.com/u/japel22870)\
**Replies:** 2\
**Last updated:** [October 27, 2021, 9:39am UTC](https://discourse.mcneel.com/t/how-can-i-project-something-into-something-else/132291 "2021-10-27T09:39:04Z")

</div>

let’s say that I make a box, then I want to project whatever thing I’m drawing in one face of the box, but while I’m drawing it, and not after that I finished the drawing, as if I was using the project box under the snap…

---

## [Projecting/Pulling curves onto a semi-spherical polysurface](https://discourse.mcneel.com/t/projecting-pulling-curves-onto-a-semi-spherical-polysurface/124834)

<div class="topic-metadata">

**Author:** [@jh1546](https://discourse.mcneel.com/u/jh1546)\
**Replies:** 22\
**Last updated:** [May 27, 2021, 10:37am UTC](https://discourse.mcneel.com/t/projecting-pulling-curves-onto-a-semi-spherical-polysurface/124834 "2021-05-27T10:37:04Z")

</div>

Hi, does anyone have a solution for this… I am trying to pull a set of curves in a hexagon pattern onto a polysurface. Each time, I end up with this: (it doesn’t reach the sides). I also tried projecting but this on…

---

## [Spherical Projection Origin](https://discourse.mcneel.com/t/spherical-projection-origin/49266)

<div class="topic-metadata">

**Author:** [@Marc\_DiGiaimo](https://discourse.mcneel.com/u/Marc_DiGiaimo)\
**Replies:** 11\
**Last updated:** [May 17, 2021, 5:31pm UTC](https://discourse.mcneel.com/t/spherical-projection-origin/49266 "2021-05-17T17:31:05Z")

</div>

I’m trying to make a globe as a truncated icosahedron, a soccer ball shape. I have vectors for countries wrapped as a sphere, just how I want them. Is there a way to project them from the sphere to the polygon from a ce…

---

## [Help: trouble with projecting crv to surface](https://discourse.mcneel.com/t/help-trouble-with-projecting-crv-to-surface/117625)

<div class="topic-metadata">

**Author:** [@askealbertus](https://discourse.mcneel.com/u/askealbertus)\
**Replies:** 3\
**Last updated:** [February 3, 2021, 5:34am UTC](https://discourse.mcneel.com/t/help-trouble-with-projecting-crv-to-surface/117625 "2021-02-03T05:34:09Z")

</div>

I am having some trouble getting sidewalks crv to fit to the landscape surface layer in Rhino. I created the landscape surface and now I am creating the sidewalks by projecting the curve of the sidewalk to the landscape…

---

## [Projection does not use all geometry / wireframe](https://discourse.mcneel.com/t/projection-does-not-use-all-geometry-wireframe/114778)

<div class="topic-metadata">

**Author:** [@george.kudor](https://discourse.mcneel.com/u/george.kudor)\
**Replies:** 2\
**Last updated:** [December 18, 2020, 12:07pm UTC](https://discourse.mcneel.com/t/projection-does-not-use-all-geometry-wireframe/114778 "2020-12-18T12:07:36Z")

</div>

Hello community! I know it may seem a strange situation, but, I am trying to project an open polysurface onto another surface. The thing is that there is an area on the object without wireframe that is not projecting ont…

---

## [Project not projecting absolutely](https://discourse.mcneel.com/t/project-not-projecting-absolutely/110122)

<div class="topic-metadata">

**Author:** [@danjarvis8](https://discourse.mcneel.com/u/danjarvis8)\
**Replies:** 9\
**Last updated:** [November 1, 2020, 11:51am UTC](https://discourse.mcneel.com/t/project-not-projecting-absolutely/110122 "2020-11-01T11:51:58Z")

</div>

Hi everyone, just a little problem that I can’t work out. I’ve got a few curves that I need to project onto a very large terrain surface that’s been made with the patch technique. I’m finding when I project there’s a sma…

[Next page](https://discourse.mcneel.com/tag/project/188.md?match_all_tags=true&page=1&tags%5B%5D=project)
