# VSR end of Life-

**URL:** <https://discourse.mcneel.com/t/vsr-end-of-life/142135>\
**Category:** Rhino\
**Created:** [May 4, 2022, 9:52pm UTC](https://discourse.mcneel.com/t/vsr-end-of-life/142135 "2022-05-04T21:52:23Z")\
**Posts on this page:** 1\
**Showing post:** 189

<div class="post-metadata">

**Author:** ![Rhino\_Bulgaria](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/rhino_bulgaria/32/505284_2.png) [@Rhino\_Bulgaria](https://discourse.mcneel.com/u/Rhino_Bulgaria)\
**Post date:** [May 15, 2022, 1:39am UTC](https://discourse.mcneel.com/t/vsr-end-of-life/142135/189 "2022-05-15T01:39:58Z")

</div>

This is how to make Rhino 30% more powerful for quality NURBS modeling:

> [@Direct surface control point manipulators and UVW improvement](https://discourse.mcneel.com/t/direct-surface-control-point-manipulators-and-uvw-improvement/75750):
>
> Hello, Is there any way to directly adjust the position and rotation of individual or multiple control points with “arrow manipulators” similar to the ones shown in the following video at 5:14? I regularly use the UVN tool, and I’m also aware of the holding down the Alt key while building a “Blend surface” to rotate it’s end control point manipulator, but I often need to manually adjust already built surfaces and it’s a lot slower and less interactive to move control points indirectly from the…

 ![Control point modeling](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/c/2/2/c22253bc026dd5fe1b0df8cff73fc29188bf07ef.png)

---

_[View the full topic](https://discourse.mcneel.com/t/vsr-end-of-life/142135)._