# Unboolean?

**URL:** <https://discourse.mcneel.com/t/unboolean/24448>\
**Category:** Rhino for Windows\
**Created:** [September 1, 2015, 8:14pm UTC](https://discourse.mcneel.com/t/unboolean/24448 "2015-09-01T20:14:22Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![doubleclick](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/doubleclick/32/87403_2.png) [@doubleclick](https://discourse.mcneel.com/u/doubleclick)\
**Post date:** [September 1, 2015, 8:14pm UTC](https://discourse.mcneel.com/t/unboolean/24448/1 "2015-09-01T20:14:22Z")

</div>

Hi,  
I have looked through the Web and user guides in an attempt to find a comand to fit my purpose. What I am looking to do is unboolean things. So I have say a fuel tank for a yacht. It has a top plate with inlets etc. I model the parts separately (some are common from file) then boolean the lot together. I boolean to check for water tight, volume etc and so I don’t loss bits when I move it in to the hull. “Oh no I have put that bit on the wrong way up.” The only option I know of is explode but I don’t want all the separate surfaces I what the separate parts. Is there a way? If not a comand that I am missing maybe a different approach to my modeling, any tips?  
Thanks in advance.

---

<div class="post-metadata">

**Author:** ![pascal](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/pascal/32/479395_2.png) [@pascal](https://discourse.mcneel.com/u/pascal)\
**Post date:** [September 1, 2015, 8:16pm UTC](https://discourse.mcneel.com/t/unboolean/24448/2 "2015-09-01T20:16:47Z")

</div>

Hi Doubleclick - ExtractSrf and Untrim are going to be your friends here, but it can get complicated and fussy, depending on the shapes and how they’ve combined.

-Pascal

---

<div class="post-metadata">

**Author:** ![mary](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/mary/32/764567_2.png) [@mary](https://discourse.mcneel.com/u/mary)\
**Post date:** [September 1, 2015, 8:41pm UTC](https://discourse.mcneel.com/t/unboolean/24448/3 "2015-09-01T20:41:44Z")

</div>

At the risk of sounding like a cheer leader, **Rhino for Mac** offers a nice option here that **Rhino for Windows** currently does not natively offer.

We talk so much about what is _not_ in Rhino for the Mac, it is easy to forget that there are few things that are only in **Rhino for Mac** too.

In **Rhino for Mac** , if you saved the model before you did the boolean, you can revert back to the pre-booleaned model. You could also, copy the pre-booleaned parts to the current model, via the clipboard. This is called **Versions**. In **Rhino for Mac** , on the **File** menu, pick **Revert to -\> Browse All Version**. When you find the version you want, either restore or copy and paste into your current model.

In **Rhino for Windows** , I recommended always incremental saving the model before Boolean operations, or saving your own “decorated” version. I realize this can be a daunting task.

Without a saving a pre-booleaned model, as Pascal replied, you are into a pretty challenging advanced surfacing project. This takes some advanced knowledge of Rhino to do effectively and efficiently.

Thanks for letting me tangent a bit from the current issue in this thread.  
Sincerely,  
Mary Fugier

---

<div class="post-metadata">

**Author:** ![doubleclick](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/doubleclick/32/87403_2.png) [@doubleclick](https://discourse.mcneel.com/u/doubleclick)\
**Post date:** [September 1, 2015, 8:53pm UTC](https://discourse.mcneel.com/t/unboolean/24448/4 "2015-09-01T20:53:14Z")

</div>

Boo no unboolean,

Thanks both. So yes it’s change my modeling or buy a mac! Will have to save out versions before I boolean.

---

<div class="post-metadata">

**Author:** ![mary](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/mary/32/764567_2.png) [@mary](https://discourse.mcneel.com/u/mary)\
**Post date:** [September 1, 2015, 8:57pm UTC](https://discourse.mcneel.com/t/unboolean/24448/5 "2015-09-01T20:57:12Z")

</div>

You are a quick study!  
Thanks for the update.  
Sincerely,  
Mary Fugier

---

<div class="post-metadata">

**Author:** ![eddi](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/eddi/32/514714_2.png) [@eddi](https://discourse.mcneel.com/u/eddi)\
**Post date:** [September 1, 2015, 9:06pm UTC](https://discourse.mcneel.com/t/unboolean/24448/6 "2015-09-01T21:06:38Z")

</div>

Is not that what you are looking for ? I think boolean data is stored inside Rhino file and reversible, but this plugin costs a bit  
[Link here: click](http://www.npowersoftware.com/rhino/proverview.htm)

---

<div class="post-metadata">

**Author:** ![cian](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/cian/32/477765_2.png) [@cian](https://discourse.mcneel.com/u/cian)\
**Post date:** [September 1, 2015, 9:41pm UTC](https://discourse.mcneel.com/t/unboolean/24448/7 "2015-09-01T21:41:27Z")

</div>

Hi Doubleclick,  
have you tried the round hole & make hole function, it will allow you to make different shapes & size holes, move the holes and remove holes. If you have several items to make assembly (fuel tank - tank plates, internal baffles, valves, etc) then group them together.

---

<div class="post-metadata">

**Author:** ![mary](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/mary/32/764567_2.png) [@mary](https://discourse.mcneel.com/u/mary)\
**Post date:** [September 2, 2015, 5:29am UTC](https://discourse.mcneel.com/t/unboolean/24448/8 "2015-09-02T05:29:38Z")

</div>

Hi Eddi,  
**Power Solids for Rhino** looks like an interesting plug.  
If you do a lot of Booleans, it could be worth it.  
And they say it is fun!

If anyone tries an eval, please report back.  
Thanks for sharing the link.  
Sincerely,  
Mary Fugier

---

<div class="post-metadata">

**Author:** ![doubleclick](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/doubleclick/32/87403_2.png) [@doubleclick](https://discourse.mcneel.com/u/doubleclick)\
**Post date:** [September 2, 2015, 8:33pm UTC](https://discourse.mcneel.com/t/unboolean/24448/9 "2015-09-02T20:33:42Z")

</div>

Eddie,  
Thanks for tip will look into that. Cian, yes your right I could use the hole comand to make spaces for all the parts. Like a solidworks assembly. Maybe I am too obsessed with joining the thing up.

---

<div class="post-metadata">

**Author:** ![eddi](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/eddi/32/514714_2.png) [@eddi](https://discourse.mcneel.com/u/eddi)\
**Post date:** [September 3, 2015, 11:54am UTC](https://discourse.mcneel.com/t/unboolean/24448/10 "2015-09-03T11:54:06Z")

</div>

@mary  
@doubleclick  
If interest, i have a few old video tutorial’s, format \*.wmv (but previous version Tools Rh3, Rh4)  
Regards
