# Trim of a solid yields a surface?

**URL:** <https://discourse.mcneel.com/t/trim-of-a-solid-yields-a-surface/167405>\
**Category:** Rhino\
**Tags:** windows\
**Created:** [October 17, 2023, 3:13pm UTC](https://discourse.mcneel.com/t/trim-of-a-solid-yields-a-surface/167405 "2023-10-17T15:13:16Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ronald1](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/ronald1/32/481554_2.png) [@ronald1](https://discourse.mcneel.com/u/ronald1)\
**Post date:** [October 17, 2023, 3:13pm UTC](https://discourse.mcneel.com/t/trim-of-a-solid-yields-a-surface/167405/1 "2023-10-17T15:13:16Z")

</div>

When I trim the solid cylinders with the surface, the cylinders become surfaces. Am I using the wrong parameters?  
[Trim\_Test.3dm](https://discourse.mcneel.com/uploads/short-url/c2Xw9hWjKF2m69xIVAIlKcihjUW.3dm) (3.0 MB)

---

<div class="post-metadata">

**Author:** ![John\_Brock](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/john_brock/32/476283_2.png) [@John\_Brock](https://discourse.mcneel.com/u/John_Brock)\
**Post date:** [October 17, 2023, 3:45pm UTC](https://discourse.mcneel.com/t/trim-of-a-solid-yields-a-surface/167405/2 "2023-10-17T15:45:46Z")

</div>

You’ve described what Trim is supposed to do.

What do you want to happen instead?

---

<div class="post-metadata">

**Author:** ![jeremy5](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/jeremy5/32/773943_2.png) [@jeremy5](https://discourse.mcneel.com/u/jeremy5)\
**Post date:** [October 17, 2023, 3:54pm UTC](https://discourse.mcneel.com/t/trim-of-a-solid-yields-a-surface/167405/3 "2023-10-17T15:54:45Z")

</div>

> [@ronald1](#):
>
> When I trim the solid cylinders with the surface

If you want to be left with solids, use \_BooleanSplit instead, then delete the leftovers.

HTH  
Jeremy

---

<div class="post-metadata">

**Author:** ![ronald1](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/ronald1/32/481554_2.png) [@ronald1](https://discourse.mcneel.com/u/ronald1)\
**Post date:** [October 17, 2023, 4:03pm UTC](https://discourse.mcneel.com/t/trim-of-a-solid-yields-a-surface/167405/4 "2023-10-17T16:03:01Z")

</div>

Yes, I want the cylinders to remain closed polysurfaces.
