# Tolerance parameters

**URL:** <https://discourse.mcneel.com/t/tolerance-parameters/68207>\
**Category:** Grasshopper\
**Created:** [August 4, 2018, 3:42pm UTC](https://discourse.mcneel.com/t/tolerance-parameters/68207 "2018-08-04T15:42:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mikity\_kogekoge](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/mikity_kogekoge/32/772402_2.png) [@mikity\_kogekoge](https://discourse.mcneel.com/u/mikity_kogekoge)\
**Post date:** [August 4, 2018, 3:42pm UTC](https://discourse.mcneel.com/t/tolerance-parameters/68207/1 "2018-08-04T15:42:34Z")

</div>

Hello,  
A lot of functions provided by Rhino.Geometry have a tolerance parameter, such as BrepFace.Split and Brep.CreateBooleanIntersection. Is there a rule of thumb to find a good tolerance number?  
Grasshopper components don’t have tolerance parameters in general, so when I replace Grasshopper components by a Python scripting node, this tolerance parameter makes a headache in my head. (also, if you hit a Rhino command in the normal Rhino environment, you are not asked tolerance. So I believe there is a way to automatically adjust tolerance)  
Thanks!

---

<div class="post-metadata">

**Author:** ![tim.stark](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/tim.stark/32/704108_2.png) [@tim.stark](https://discourse.mcneel.com/u/tim.stark)\
**Post date:** [August 4, 2018, 3:56pm UTC](https://discourse.mcneel.com/t/tolerance-parameters/68207/2 "2018-08-04T15:56:24Z")

</div>

Just guessing, but maybe the standard components use documents tolerances?

---

<div class="post-metadata">

**Author:** ![Michael\_Pryor](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/michael_pryor/32/489117_2.png) [@Michael\_Pryor](https://discourse.mcneel.com/u/Michael_Pryor)\
**Post date:** [August 4, 2018, 4:10pm UTC](https://discourse.mcneel.com/t/tolerance-parameters/68207/3 "2018-08-04T16:10:11Z")

</div>

It is typical in gh components to do two ways either:  
A. Provide a tolerance input for the user  
B. Use Rhinos document tolerance. [How to get rhino file tolerance?](https://discourse.mcneel.com/t/how-to-get-rhino-file-tolerance/38087)
