# Tensile surface from curves:

**URL:** <https://discourse.mcneel.com/t/tensile-surface-from-curves/89680>\
**Category:** Grasshopper\
**Created:** [October 1, 2019, 2:56pm UTC](https://discourse.mcneel.com/t/tensile-surface-from-curves/89680 "2019-10-01T14:56:57Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![janaka.lemon](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/janaka.lemon/32/178528_2.png) [@janaka.lemon](https://discourse.mcneel.com/u/janaka.lemon)\
**Post date:** [October 1, 2019, 2:56pm UTC](https://discourse.mcneel.com/t/tensile-surface-from-curves/89680/1 "2019-10-01T14:56:57Z")

</div>

![Tensile](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/e/a/eace45ca71653cb5bb4f8f742b5a39ce8c7dc6e0.jpeg) Hi. I have a bunch of curves that I’d like to connect with a tensile surface. I’ve tried a bunch of definitions with Kangaroo, but they all seem to be working with points. Is there a definition where I can use the large circle as a border and the three floating ones as points that pull it upp? (see image).

It seems rather straight forward, but I can’t seem to make it work.

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![DanielPiker](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/danielpiker/32/666337_2.png) [@DanielPiker](https://discourse.mcneel.com/u/DanielPiker)\
**Post date:** [October 1, 2019, 3:03pm UTC](https://discourse.mcneel.com/t/tensile-surface-from-curves/89680/2 "2019-10-01T15:03:26Z")

</div>

> [@janaka.lemon](#):
>
> use the large circle as a border and the three floating ones as points that pull it up

Hi Janaka,  
did you mean to include an image or link with this post?

---

<div class="post-metadata">

**Author:** ![janaka.lemon](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/janaka.lemon/32/178528_2.png) [@janaka.lemon](https://discourse.mcneel.com/u/janaka.lemon)\
**Post date:** [October 1, 2019, 3:13pm UTC](https://discourse.mcneel.com/t/tensile-surface-from-curves/89680/3 "2019-10-01T15:13:38Z")

</div>

Yeah, sorry, the image somehow didn’t upload. Fixed it now.

---

<div class="post-metadata">

**Author:** ![DanielPiker](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/danielpiker/32/666337_2.png) [@DanielPiker](https://discourse.mcneel.com/u/DanielPiker)\
**Post date:** [October 1, 2019, 3:32pm UTC](https://discourse.mcneel.com/t/tensile-surface-from-curves/89680/4 "2019-10-01T15:32:07Z")

</div>

Generally you do need to define some sort of mesh for the surface first.  
Here’s one way using the LiveSoap component that adjusts the mesh as it is running

 ![image](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/2/4/24d6d5d8dba441351d8c13065ede1d9b84b7db31.png)  
[circles\_tensile\_example.gh](https://discourse.mcneel.com/uploads/short-url/3hWLggWp6I5ZNiI2WazFsEBCNVd.gh) (19.5 KB)

Alternatively, you can define the patches by manually building a coarse quad mesh first then subdividing. This can be useful if you want to divide into strips later for fabrication.

---

<div class="post-metadata">

**Author:** ![janaka.lemon](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/janaka.lemon/32/178528_2.png) [@janaka.lemon](https://discourse.mcneel.com/u/janaka.lemon)\
**Post date:** [October 1, 2019, 4:12pm UTC](https://discourse.mcneel.com/t/tensile-surface-from-curves/89680/5 "2019-10-01T16:12:13Z")

</div>

That’s exactly what I was looking for. Thanks!

I haven’t tried the soap components enough to understand how to use them yet. Will definitely look into them more.
