# Sub-object scale "bug"

**URL:** <https://discourse.mcneel.com/t/sub-object-scale-bug/59090>\
**Category:** Rhino for Windows\
**Tags:** scale, subobject\
**Created:** [March 27, 2018, 12:29pm UTC](https://discourse.mcneel.com/t/sub-object-scale-bug/59090 "2018-03-27T12:29:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Helvetosaur](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/helvetosaur/32/635974_2.png) [@Helvetosaur](https://discourse.mcneel.com/u/Helvetosaur)\
**Post date:** [March 27, 2018, 12:29pm UTC](https://discourse.mcneel.com/t/sub-object-scale-bug/59090/1 "2018-03-27T12:29:24Z")

</div>

In the attached, if I subobject select and scale either the outer cylinder surface or the top/bottom edges - using either Gumball 2D scale (Shift+Plane handle, enter a value) or just plain old Scale2D - the inner openings also scale with it. I don’t understand why they are connected in this case.

It seems if you sub-select the entire outer loop of a brep face, Rhino considers it as if the face itself had been subobject selected, not just the edges - so it scales the whole face. This is wrong IMO, if the user specifically selects the edges, only they should scale, leaving the other surface loops intact.

[Gumball.3dm](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/b/0/b06905b77e4d45909d6e259d6c2bfed9243d8226.3dm) (125.4 KB)

–Mitch

---

<div class="post-metadata">

**Author:** ![pascal](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/pascal/32/479395_2.png) [@pascal](https://discourse.mcneel.com/u/pascal)\
**Post date:** [March 27, 2018, 10:05pm UTC](https://discourse.mcneel.com/t/sub-object-scale-bug/59090/2 "2018-03-27T22:05:45Z")

</div>

Hi Mitch - I see that… thanks.  
[https://mcneel.myjetbrains.com/youtrack/issue/RH-45102](https://mcneel.myjetbrains.com/youtrack/issue/RH-45102)

-Pascal
