Some issue with revit section back to rhino

Rhino.Inside Revit
1

Hi Scott, here the Problems that I am having in my model.
1.
I am trying to get from this model the section part and get it into Revit and I am getting something strange especially in the zones where cylindrical geometry are located. How can I fix it? It is something related with the tolerances?

image
image775×512 97.9 KB

Model in Revit

image
image945×389 11.1 KB

Section in Revit

image
image945×594 113 KB

Geometrie back to rhino

image
image945×247 61.7 KB

image
image691×184 34 KB

I tried to put a lot of curves in one family but not all all the lines are contained in the family and I get this error messages

image
image945×325 88.5 KB

image
image945×736 120 KB

In rhino
image
image945×820 139 KB

In Revit

I put it here because some times also get the error that the line that I am trying to insert in the family is smaller or under the tolerance.

Thanks a lot

2

Hi Reneluna,

It looks like you have several questions. Can you break these into separate small examples, with files. The geometry is a critical variable here.

Thanks

3

Hi Japhy,
Ok for the first one I send you the files.
Workflow:

  1. I created the volumes in Rhino and imported as a family in Revit.
  2. I draw a section Line in revit
    3 I want the cutted geometry back in Rhino but I get Invalid Brep listed with geometry issues.

How can I fix it? is it something related with the tolerances?

Thaks for you help and Time
RiR_RetrieveSection.gh (9.0 KB)
RetrieveSection.3dm (607.1 KB)
R21_RetrieveSection.rvt (4.3 MB)

4

Reneluna, The input geometry being sectioned by the view has the invalid brep, cleaning that up (tolerances, clean geometry) would be the place to start.

image
image2347×478 169 KB

https://www.rhino3d.com/inside/revit/1.0/guides/rir-grasshopper#tolerances