# Solid edge thickness

**URL:** <https://discourse.mcneel.com/t/solid-edge-thickness/5053>\
**Category:** Rhino for Windows\
**Created:** [January 9, 2014, 8:15pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053 "2014-01-09T20:15:14Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 9, 2014, 8:15pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/1 "2014-01-09T20:15:14Z")

</div>

Hy¡

Im becoming crazy, i have to print some documents and there are some solids, like pipes or sphere, i would like to control the thickness from all this solid, i mean.

With layer properties i can control the line width from simple lines but if i put a pipe in this layer , the boundary lines from this pipe are not affected of this line width layer…

somebady knows how can i this fix?

Thanks a lot¡

---

<div class="post-metadata">

**Author:** ![carvecream](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/carvecream/32/487337_2.png) [@carvecream](https://discourse.mcneel.com/u/carvecream)\
**Post date:** [January 9, 2014, 9:42pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/2 "2014-01-09T21:42:11Z")

</div>

Hi Fernando,  
I’m assuming you are talking about controlling the print width of the lines via the properties settings? Anything that will display a curve should indeed be affected by the print width settings. Sample print image attached of a pipe on different layers with different print width settings.

 ![](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/5/4/54517eec0331f2f731d5a2b5562b086496accaf7.jpg)

If you’re instead talking about controlling actual wall thickness of the solid from the properties, then that is not really possible right now.

Perhaps attach a sample file if you are not getting expected behavior.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 10, 2014, 10:04am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/3 "2014-01-10T10:04:04Z")

</div>

Thanks Carvecream¡

I think you are using wireframe display, however i want to control the real visible edges from this pipes in a Technical display mode, i can make it in Autocad in a simple way, i create tow layers and then printing i set the line width for each layer.

I send a picture maybe is better to explain…

I want to have this print but with Rhino, is possible? I dont find the way

Thanks¡

---

<div class="post-metadata">

**Author:** ![wim](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/wim/32/747482_2.png) [@wim](https://discourse.mcneel.com/u/wim)\
**Post date:** [January 10, 2014, 1:06pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/4 "2014-01-10T13:06:24Z")

</div>

You should be able to do that, yes. I remember running into issues with that a while ago but don’t remember what they were. In your technical display mode, did you turn up the line widths for Edges and Sihouettes under  
[mode name] \> Objects \> Lines?

If that doesn’t’ work, you’ll have to be more specific as to which settings you are using where and if possible send a model for others to look at.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 10, 2014, 1:30pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/5 "2014-01-10T13:30:49Z")

</div>

Thanks Wim¡

I modified in properties\>view\>technical\>objets and here i can set a general width for all the edges, silhouettes and curves but i want to control it by layer becose i dont want all with the same width… i know rhino is not autocad but i guess there is some way to control it accurater.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 10, 2014, 1:34pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/6 "2014-01-10T13:34:40Z")

</div>

If i want to print three pipes with differents width lines, for example 0,1 mm, 1mm and 2mm width… how can i do?

If i draw lines, this lines are affected from layer properties and consequently print width but with solids are not working…

---

<div class="post-metadata">

**Author:** ![Peter](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/peter/32/332817_2.png) [@Peter](https://discourse.mcneel.com/u/Peter)\
**Post date:** [January 10, 2014, 2:42pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/7 "2014-01-10T14:42:51Z")

</div>

Does this help? Not sure if this helps when printing though.

 ![](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/6/e/6efb7ae9149415bbef13d3d7f9acfd9699fadacc.png)

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 10, 2014, 3:30pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/8 "2014-01-10T15:30:29Z")

</div>

Thanks Peter¡

But this setting is general, all the edge are 2 pixel thickness, i want to control by layer…

---

<div class="post-metadata">

**Author:** ![Peter](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/peter/32/332817_2.png) [@Peter](https://discourse.mcneel.com/u/Peter)\
**Post date:** [January 10, 2014, 3:36pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/9 "2014-01-10T15:36:47Z")

</div>

Sadly trough the layers i dont think this is possible. I don’t know if Rhino has any option to have custom line widths for objects.

The only cheat, I could think up quickly would be putting curves with the correct thicknesses over the objects, but this only works from 1 view, and only if you have just a couple of objects, else it is just too time consuming.

---

<div class="post-metadata">

**Author:** ![wim](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/wim/32/747482_2.png) [@wim](https://discourse.mcneel.com/u/wim)\
**Post date:** [January 10, 2014, 4:14pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/10 "2014-01-10T16:14:32Z")

</div>

You can make copies of your display mode and modify thickness for each. Then assign a specific mode to a specific object. If you don’t have too many different modes that should be doable.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 10, 2014, 4:58pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/11 "2014-01-10T16:58:28Z")

</div>

Thanks everyone¡

I think with Rhino is not avalible this kind of management…

---

<div class="post-metadata">

**Author:** ![carvecream](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/carvecream/32/487337_2.png) [@carvecream](https://discourse.mcneel.com/u/carvecream)\
**Post date:** [January 10, 2014, 5:15pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/12 "2014-01-10T17:15:24Z")

</div>

Peter, this cheat works better than you think. Can work from any view. DupFaceBorder, put those curves on new layer with proper line width settings. Print. voila.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 10, 2014, 5:18pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/13 "2014-01-10T17:18:51Z")

</div>

thanks Carvecream¡

I have another solution, make2d and then i have simple lines that are affected from layer properties, same solition like you but another way… ☹

---

<div class="post-metadata">

**Author:** ![skysurfer](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/skysurfer/32/665707_2.png) [@skysurfer](https://discourse.mcneel.com/u/skysurfer)\
**Post date:** [January 10, 2014, 7:16pm UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/14 "2014-01-10T19:16:56Z")

</div>

If you extract the curve you want to gave thicker and put them in a layer they would print as you need.  
It’s a @BrianJ trick.

---

<div class="post-metadata">

**Author:** ![Peter](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/peter/32/332817_2.png) [@Peter](https://discourse.mcneel.com/u/Peter)\
**Post date:** [January 11, 2014, 9:13am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/15 "2014-01-11T09:13:44Z")

</div>

After a good night of sleep, I also figured out that of course if you leave the mesh in too, it will of course cover the ‘backsides’ of the lines.

For now I hope you’ll be able to work for now with these solutions, I would advice the DupFaceBorder way since make2d removes the option to change things easily.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 11, 2014, 10:09am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/16 "2014-01-11T10:09:30Z")

</div>

Hey Skysurfer and Peter.

There is a problem with dupfaceborder, in one pipe there is two circles as facesborder, but still missing the real boundary that its depended from the view…

---

<div class="post-metadata">

**Author:** ![Peter](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/peter/32/332817_2.png) [@Peter](https://discourse.mcneel.com/u/Peter)\
**Post date:** [January 11, 2014, 10:12am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/17 "2014-01-11T10:12:42Z")

</div>

The only other way I would know is the one I proposed, Putting curves at the missing parts manually I’m afraid, perhaps someone else has any other ideas.

---

<div class="post-metadata">

**Author:** ![fernadonoso](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/fernadonoso/32/3160_2.png) [@fernadonoso](https://discourse.mcneel.com/u/fernadonoso)\
**Post date:** [January 11, 2014, 10:22am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/18 "2014-01-11T10:22:00Z")

</div>

but if view changes than this lines are not more valid…

---

<div class="post-metadata">

**Author:** ![Peter](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/peter/32/332817_2.png) [@Peter](https://discourse.mcneel.com/u/Peter)\
**Post date:** [January 11, 2014, 10:25am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/19 "2014-01-11T10:25:02Z")

</div>

Correct, it’s a very limited solution as I was afraid of earlier in this topic. I had hoped the surface borders would help, but these do not suffice for your cause.

---

<div class="post-metadata">

**Author:** ![wim](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/wim/32/747482_2.png) [@wim](https://discourse.mcneel.com/u/wim)\
**Post date:** [January 11, 2014, 11:14am UTC](https://discourse.mcneel.com/t/solid-edge-thickness/5053/20 "2014-01-11T11:14:14Z")

</div>

How many different styles are we talking about?

[Next page](https://discourse.mcneel.com/t/solid-edge-thickness/5053.md?page=2)
