Slow canvas UI (with multiple elements)

I’ve also encountered this issue, originally described by @Pedro_Varela. Is there any known solution to this? My grasshopper interface lags tremendously on my Mac.

My theory is that the Scribbles and groups tremendously slow down sizeable definitions on macOS.

I just tried removing all groups and scribbles from my grasshopper file, without any noticeable increase in performance. Any other ideas of might cause this?

I haven’t read this whole thread but have observed that geometry far from the origin causes GH to slow WAY DOWN, including any attempts to move around the canvas.

I am also not that happy with the current gh-canvas responsiveness… In some areas it is really painfully slow. From my experience, the canvas framerate is a function of the following main parameters:

  • Active resolution of the canvas / DPI
  • Number of currently visible components
  • Zoom factor (when you zoom in, so that text becomes visible, more UI curves have to be computed)

I actually opted for a 1440p external monitor, and scaled the GH window down a bit, so that I have a lower canvas resolution, which in my experience is the main factor for the framerate.

That said, I think the current performance of the canvas UI is not acceptable. Even resizing an EMPTY GH window takes ages.

Dan has already posted some potential suggestions to solve this:

Hope the GH canvas will run smoothly on the Mac one day, since it very important for creating large scripts and navigating through them in a fast manner.

Hope this was helpful! :pray:t3:

1 Like

I think your contribution is most valuable. Most of all, your three “parameters” seem to me very well described, as I also feel exactly the same symptoms in my system. I will not get tired of claiming how unacceptable this UI performance is. I should confess that I did not upgrade from Rhino 5 to Rhino 6 because I don’t feel good shelling out money for a software which is not in the level it claims to be and should be. (and I tested the beta versions).

1 Like

Hey everyone,

Thanks for the additional information, and I’m sorry to hear there are still lots of frustration with this. The biggest performance factor that I’ve experienced is the size of the canvas, which is exacerbated by retina displays. As you all may understand, it is very difficult to translate the windows-specific System.Drawing infrastructure that Grasshopper uses to CoreGraphics in an efficient way. However, as @Joseph_Oster reports there may be some issues drawing some things “far from origin”, which might be able to be improved/optimized.

What would really help troubleshoot this issue on our end is sample GH definition(s) that exhibit extreme slowdowns of canvas drawing that you are encountering. If any of the definitions you’re working with are extremely slow, feel free to post them here or send them to me directly and I can look to see if I can find anywhere we can improve.

1 Like

Thank you for you answer!

From my experience this behavior is reproducible with nearly any GH definition, that has 10-20 components.

May be the case… for me it seems that very large scripts slow down the canvas even further (more than 1000-1500 components…)

I attached a video showing the canvas performance first with a script containing 105 components and secondly a script with 1625 components.
With the latter, it performed equally to a 100 component script, but abruptly got slower after containing around 1400 components. I cannot share the latter script since this is from a competition we are working on, but ill try to find another large script…
Finally I am resizing an empty GH window, which takes very long (I am using a base model 16"MBP).

Thanks a lot and please let me know if anything is unclear!
Rudi

Hey @curtisw,

the last few bigger scripts that I did, where for work, but I found an older one that exhibits the same issue. I did some comparisons with Windows on BootCamp, where I got 42fps (of course depending on where you zoom in at the script). On the Mac side, I can’t give an exact fps count as the Canvas redraw speed does not give accurate results (I got sth around 92fps, which is not correct). But on GH for Mac the canvas is extremely slow, no matter where you zoom in in the script. Even if you just zoom into an empty area (!).

I attached the script, it is a bit messy, but hope it helps :pray:

Best wishes from Vienna!
Rudi

Studio_HB_Skript.gh (1.1 MB)

1 Like

As this might be the case, it’s not exactly the whole truth in my opinion, since I have MacBook Pro with hi-def display, but I mostly work in clamshell mode (closed lid) with a bigger, external monitor that doesn’t have a “super crazy” resolution (2560 x 1440) for its overall size. Still the issues are nearly the same as working with the laptop display, maybe a tiny, tiny bit less. Also do most Windows users really work on low-def displays nowadays?

It’s funny, nearly ironic, how the .Net framework always comes up, when it comes to cross-platform issues.
Though I’m interested in this kinda stuff and appreciate @dan’s honesty, I feel like most of customers really shouldn’t have to care about how it’s difficult for you guys to emulate or port this and that to macOS. I mean you kinda promised to deliver a finished product for professionals on the mac platform, but it often feels like we’re still in the beta phase! Let’s be honest there are still tons of bugs, and it’s super tiring and time consuming to report them, wait for answer (that may never come), wait for the next update, etc.

Because of you, I never stray too far from the sidewalk, erm… origin, I mean, origin! I hope I don’t get a copyright strike for this. :yum:

When I read all of this I’m not exactly optimistic for the futur of macOS Rhino and especially Grasshopper. At this point, it’s simply not a great tool performance-wise especially for professional users, simply because of these limitations. A friend of mine uses an iMac Pro, which is a ludicrously fast (and expensive) machine and most issues still persist (unfortunately he’s no active forum member), but it does have a 5K display. :scream:
When I look at other similar programs that I’m familiar with, like Houdini, I’m sorry to say, but the UI experience is much better and more fluent even with huge, nested definitions (much like clusters in clusters) and frankly the indie license is very affordable.

I have suggestion for you, drop four or five components onto the canvas and try to resize the Grasshopper window on macOS! :mask:

Like @rudolf.neumerkel already reported, it’s not really hard to come up with a laggy definition.

It’s really like working in slow motion! Bullet time!!

I have found a workaround though! If you do everything in a scripting component (i.e. Python, C#), you can really save up on components and only have to deal with all the other issues. :wink:

Other tricks that can speed things up for large definitions:

  • no Scribbles
  • no grouping
  • no use of excessive panels that output lots of data
  • use Data Dam components

Also, Rhino must have a much more solid backend, because its window behaves much more fluently!

Edit (2020-06-12)

What I forgot to mention yesterday is that the overall performance of Grasshopper in Rhino 5 was better.

2 Likes

Here is another example with a relatively small script (300 components), but “higher component density”, which is also quite laggy to move through… This is now filling half of my MBP16" screen. Having gh in full screen mode would be even slower - however having a dual screen setup with Rhino on one screen and GH on the other is very common…

Hope the frame-drop is visible in this low quality video.

Best wishes,
Rudi

200525_aggregation and export_MV.gh (139.9 KB)

1 Like

RH-59737 is fixed in the latest Service Release Candidate

2 Likes

I just wanted to chime in here and mention that I tested @curtisw’s performance improvements and they appear to give a major boost to Grasshopper on Mac. Curtis has done an amazing job with this and we hope you test out the the Release Candidate and report back.

Previously, the FPS counter found in View > Canvas redraw speed was broken, but Curtis has fixed that too in this update. That means that, going forward, we can make more meaningful comparisons to see if we’ve improved or regressed.

3 Likes

RH-60220 is fixed in the latest Service Release Candidate

2 Likes

@curtisw, @dan thanks a lot for your effort guys! You are amazing.

I tried out the newest improvements and did some comparisons myself.
6.29.20239.15172 vs. 7.0.20266.16016 running on macOS 10.15.6

Here is my experience:

  1. Canvas frame rate seems to have increased about 2x (This was measured by video recording the two versions and counting frames). And one can really feel the difference, when zooming and panning around!

  2. The speed of resizing empty GH windows has increased significantly as well, being around 5x faster (from around 0.6fps to around 3.5fps)

  3. Next I compared those improvements to the current Windows version. GH in Windows is about 3-3.7x faster.
    Furthermore, resizing GH in Windows works in an instant. Actually faster than resizing the Explorer window, which is very funny.

You guys made some great progress here. Overall GH frame rate has gone from being about 6-7.4x slower to only being 3-3.7x slower, which is great!
However, as can be seen, some improvements still have to be made. Please let me know if I can be of any help!

Best wishes,

Rudi

4 Likes

Thanks so much for the detailed testing @rudolf.neumerkel! Yep, always room for improvement, but I’m glad things are a bit faster.

2 Likes

Sure thing @dan, it is a pleasure being able to help a bit.

Are there any further canvas fps improvements, that we can expect with RH7? I am now working again on some larger scripts and am getting frame rates as low as 6fps in some areas (only using half of my 16" screen). Keep in mind, that this also slows down moving and adding components to the canvas.
Did you find out any new bottlenecks?

Thank you and have a great day!

Some small issue I just found…

Downloaded the script from Daniel´s answer:

There is some text / graphics on the top of the canvas.

Framerate with text: 6fps
After deleting the text: 30fps

Hey @rudolf.neumerkel,

Thanks for following up! I’m seeing major slowdowns with that definition too. I’ve created a new YT for that RH-62333.

Cheers!

awesome, thank you for the quick reply!