# Rhino Surface help please

**URL:** <https://discourse.mcneel.com/t/rhino-surface-help-please/6062>\
**Category:** Rhino for Windows\
**Created:** [February 18, 2014, 9:17am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062 "2014-02-18T09:17:17Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![M\_L](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@M\_L](https://discourse.mcneel.com/u/M_L)\
**Post date:** [February 18, 2014, 9:17am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/1 "2014-02-18T09:17:17Z")

</div>

I hope one of you can spare a minute and help me with a likely easy problem

I want to create a mobius strip surface but am having trouble getting a good surface. I have the curves drawn and have tried almost everything from lofting, surface from 2 splines etc but not having luck with a clean surface. Hope you can help me out. I have attached the file if one of you can take a look and help me out. thanks

[http://fs581.uploading.com/thumb/72/4321fbb0.jpg](http://fs581.uploading.com/thumb/72/4321fbb0.jpg)

[mobius strips curve rhino 4.3dm](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/4/4/44e69d128ee1885c29233e41762fa4b9b341a3c7.3dm) (83.8 KB)

---

<div class="post-metadata">

**Author:** ![pascal](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/pascal/32/479395_2.png) [@pascal](https://discourse.mcneel.com/u/pascal)\
**Post date:** [February 18, 2014, 4:29pm UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/2 "2014-02-18T16:29:20Z")

</div>

Try lofting (Loft command) all your lines- don’t use Closed sweep because it wants to flip the lines at the end. Make a BlendSrf to span the last bit and then if needed, MergeSrf to make it all one surface. ''Any luck?

-Pascal

---

<div class="post-metadata">

**Author:** ![SEANT](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/seant/32/192328_2.png) [@SEANT](https://discourse.mcneel.com/u/SEANT)\
**Post date:** [February 18, 2014, 6:15pm UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/3 "2014-02-18T18:15:08Z")

</div>

Granted, I’m not actually contributing much to the OP’s query. I’m just posting this geometry as an example of a periodic (0 to 4Pi) Mobius strip.

I’m not sure what would be a good way of recreating this in Rhino - other than manually realigning CVs of a round curve extrusion. This was created programmatically in AutoCAD.

Just thought that some may find it interesting.  
[MobStrip.3dm](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/5/c/5cfdb59b915c93cab769cd334aabb3b4d4e43e96.3dm) (41.3 KB)

---

<div class="post-metadata">

**Author:** ![M\_L](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@M\_L](https://discourse.mcneel.com/u/M_L)\
**Post date:** [February 19, 2014, 3:51am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/4 "2014-02-19T03:51:43Z")

</div>

I tried lofting but there is a slight curvature to it… The sections don’t come out straight like the red profile lines. Maybe that is the limit for a mobius strip xD

---

<div class="post-metadata">

**Author:** ![jeff\_hammond](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/jeff_hammond/32/768846_2.png) [@jeff\_hammond](https://discourse.mcneel.com/u/jeff_hammond)\
**Post date:** [February 19, 2014, 4:34am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/5 "2014-02-19T04:34:50Z")

</div>

> [@M\_L](#):
>
> I tried lofting but there is a slight curvature to it… The sections don’t come out straight like the red profile lines. Maybe that is the limit for a mobius strip xD

i think pascal was saying to select all the **red** lines (and the green one) then loft those…  
there will be one section which doesn’t fill in… use blendSrf then mergeSrf to fill the gap.

---

<div class="post-metadata">

**Author:** ![jeff\_hammond](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/jeff_hammond/32/768846_2.png) [@jeff\_hammond](https://discourse.mcneel.com/u/jeff_hammond)\
**Post date:** [February 19, 2014, 5:09am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/6 "2014-02-19T05:09:44Z")

</div>

> [@SEANT](#):
>
> Granted, I’m not actually contributing much to the OP’s query. I’m just posting this geometry as an example of a periodic (0 to 4Pi) Mobius strip.
> 
> I’m not sure what would be a good way of recreating this in Rhino - other than manually realigning CVs of a round curve extrusion. This was created programmatically in AutoCAD.

there’s always this little trick…

[![](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/d/e/5/de54966a582c7c91e2c8d1670d2157e3ba26cc35.jpeg "mobiusTwist") ](https://www.youtube.com/watch?v=DFzp-xzti6I)

that said, i’m not sure if this is a ‘real’ mobius – or, i have no clue what 0 to 4Pi is supposed to mean… you could of written 跆拳道 instead and it would of meant the same to me 😉

---

<div class="post-metadata">

**Author:** ![M\_L](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@M\_L](https://discourse.mcneel.com/u/M_L)\
**Post date:** [February 19, 2014, 5:53am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/7 "2014-02-19T05:53:21Z")

</div>

ah thanks for clearing that up… Pascal’s method work totally fine 🙂

Nice mobius trick btw, although it wouldn’t help me i think as I need the curves to be similar to ones I have

---

<div class="post-metadata">

**Author:** ![SEANT](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/seant/32/192328_2.png) [@SEANT](https://discourse.mcneel.com/u/SEANT)\
**Post date:** [February 19, 2014, 9:12am UTC](https://discourse.mcneel.com/t/rhino-surface-help-please/6062/9 "2014-02-19T09:12:14Z")

</div>

The idea behind my geometry was to create a surface the behaved more like a true Moebius. By that I mean that the surface can be evaluated through the U direction to a position on both sides. See the script.

I chose 4Pi to resemble a circle. With a circle, advancing 2Pi will return you to the start point. With a Mobius, you are at the start point, but on the underside of the surface. 4Pi returns you to the true start point.

```
Option Explicit

Sub SurfNormAtParam
	Dim srf
	Dim domU, domV
	Dim domInput(1)
	Dim tanVec
	Dim arrdata

	With Rhino
		srf = .GetObject("Pick a surface", 8)
    
		If (VarType(srf) <> vbString) Then Exit Sub
    
		
		domU = .SurfaceDomain(srf, 0)
		domInput(0) = .GetReal("U Param, input Real Number between " & CStr(DomU(0)) & " and " & CStr(DomU(1)), DomU(0), DomU(0), DomU(1))
		
		
		domV = .SurfaceDomain(srf, 1)
		domInput(1) = .GetReal("V Param, input Real Number between " & CStr(DomV(0)) & " and " & CStr(DomV(1)), DomV(0), DomV(0), DomV(1))
		
		arrdata = .SurfaceCurvature(srf, domInput)
		     
		tanVec = .AddLine(arrdata(0), .PointAdd(arrdata(0), arrdata(1)))
		
      
	End With
End Sub
SurfNormAtParam

```
