Zebra is a visual analysis tool that allows you to analyze surface flow and continuity between surfaces.
What has changed in Zebra?
Zebra has been rewritten in the current Rhino BETA. The most significant changes:
- You are now able to analyze surfaces with static Zebra stripes. This allows you to analyze an area of interest more easily. The stripes stay put as you rotate the model.
- Each mode has its own settings profile. So you can analyze your model with different settings for each mode, for example, set the frequency to 30 in Stripes, while it is set to 15 for Dots. Switching between modes will preserve custom settings.
- Zebra and all other analysis panels are now normal tabbed panels. This allows you to dock them in the same container alongside other (analysis) panels.
- Zebra and other analysis panels now have a switch to temporarily disable the analysis display. You find this toggle in the upper right hand corner of each analysis panel.
Top row buttons

In the Zebra UI, common analysis tools have been moved to the top of the panel, you’ll now find these options, from left to right:
- Add objects to analysis
- Remove objects from analysis
- Clear objects from analysis
- Adjust analysis mesh settings
- Restore to defaults
- Help
- Toggle analysis display on/off
Five different Modes
1. Stripes: Similar to Rhino 8 and previous, but with finer control
2. Radial: radial stripes, this is the best choice for analyzing curvature transitions to flat surfaces
3. Grid: Showing both horizontal and vertical stripes on the surface
4. Dots: Showing round dots on the surface, that get stretched more or less depending on curvature in both directions. Single curved surfaces will reflect dots as stripes, since they get infinitely stretched in one direction.
5. Rainbow: similar to Stripes, but multiple colors
Static analysis
Static display allows you keep the zebra lines or dots rotation and position independent from the camera. This enables you to analyze and edit a problem area in your model more easily.
Better control
In Rhino 8 and earlier, we had distinct settings for frequency of the stripes: Medium, Thin, etc. The direction was limited to either vertical and horizontal.
The frequency and rotation, as well as the width of the stripes can now be controlled precisely.
Grasshopper / Rhinocommon
The new Zebra algorithm is exposed in RhinoCommon so 3rd party developers have access to all the bells and whistles.
Sample gh definition
Download Rhino BETA and try it out!

