brian
(Brian Gillespie)
57
Rhino WIP for Windows and Mac 7.0.19295 is now available!
Bugs Fixed:
- Annotation: Hatch: Re-use last distance (RH-55150)
- CreateSolid: CreateSolid preview and command line toggle (RH-55159)
- Curve-surface intersection: Curve-surface Intersection incomplete (RH-11429)
- Display: Highlight the wires (RH-54953)
- FindTxt:
- “Replace All” should be available before clicking “Find Next” (RH-55277)
- “Replace Next” should be “Replace” (RH-55278)
- “Find Next” does not deselect the previous match (RH-55280)
- Does not cancel (RH-55285)
- Layer: Full path in -Layer > Color (RH-55130)
- Layout: Easier page organizing (RH-10765)
- Lights: Too many Undo actions for sliders in lights (RH-54863)
- NetworkSrf: Extrusion edges do not support history (RH-55247)
- Properties: Light properties page should be cross platform (RH-54666)
- Rendering:
- New Post Effects - Assert when closing render window (0 == m_iOpenCount) (RH-55216)
- New Post Effects - Assert when closing render window (m_iProgressBracket > 0) (RH-55217)
- Rendering: Materials: PBR basic sliders disabled if a texture is assigned (RH-55062)
- SelPrev: Does not work with SubD edge loop selection (RH-55218)
- Select: SubD boundary chain selection fails in command session (RH-55289)
- SubD:
- SubD Final C++ SDK cleanup (RH-53982)
- SubD - Clipping Plane shows Creamy intersection in Crunchy Mode (RH-55072)
- Some crunchy faces cannot be sub-selected (RH-55187)
- Crunchy SubD display broken at extraordinary vertices. (RH-55206)
- inconsistent box selection in crunchy mode (RH-55234)
- ON_SubD::SplitEdge splits at wrong position (RH-55245)
- SubDAppearance:
- SubD appearance - New commands - SubDDisplaySmooth, SubDDisplayFlat, SubDDisplayToggle (RH-53220)
- Toggle inside 3DFace (RH-55235)
- SubD edge and vertex snap locations need to pay attention to flat/smooth (creamy/crunchy) appearance. (RH-55243)
- SubD snapping in “flat” display mode - draw control net edge instead of surface edge (RH-55248)
Enhancements:
- Annotation: Hatch: Move the base with the hatch (RH-55109)
Features Added:
- TextField: Add new "Page Contents" field in Layout Properties (RH-55063)
SDK Enhancement:
- SDK: RhinoCommon: Expose Selection Filter settings to RhinoCommon (RH-54678)
Windows-Only Changes
Bugs Fixed:
- NetworkSrf: Edge of Mesh can not be filtered (RH-55101)
- SelectionFilter: Selection filter toolbar not paying attention to application settings change events (RH-55185)
Features Added:
- Rhino Inside: NuGet package for Rhino.Inside (RH-54969)
2 Likes
brian
(Brian Gillespie)
61
Rhino WIP for Windows and Mac 7.0.19302 is now available!
Bugs Fixed:
- Annotation: Hatch: Selecting hatch changes pattern (RH-55254)
- Curve-surface intersection: Missing intersections (RH-18945)
- FindText: "Find Next" does not deselect the previous match (RH-55280)
- InsertEdge: InsertEdge doesn't support preselection (RH-54480)
- Layout: RhinoView.PageContents() needs to raise a doc change (RH-55293)
- Licensing: Cloud Zoo: Rhino shows dialog when starting asking me to copy non-existent URL into web browser (RH-48426)
- Rendering: Light falloff UI for PBR (RH-52076)
- Rendering: Materials: Confusing behavior in Textures panel (RH-54940)
- SubD: SubD - not snapping to 'points' in Crunchy mode (RH-55068)
- TextField:
- Blocks produce “$temp_object$” Keys in Attribute User Text (RH-55275)
- BlockInstanceCount always returns 1 (RH-55287)
Enhancements:
- InsertEdge: Preview would be more helpful on limit surface for SubD (RH-54481)
Features Added:
- InsertEdge: support for multiple loops (RH-48331)
UI Change:
- InsertEdge: InsertEdge auto selections (RH-54484)
Windows-Only Changes
Bugs Fixed:
- Grasshopper: Components: Curve Explode fails on NURBS curves (RH-55262)
- TextField: Rhino application sent to back (RH-55273)
- UI Cleanup: Use multiple mapping channels field is too small (RH-55087)
3 Likes
brian
(Brian Gillespie)
62
3 Likes
brian
(Brian Gillespie)
63
Rhino WIP for Windows and Mac 7.0.19324 is now available!
Bugs Fixed:
- Annotation: Hatch: "Match" Not Working (RH-55669)
- BooleanSplit: Boolean with Infinite planes leaves very large underlying surfaces (RH-55039)
- Curve-surface intersection: Incomplete (RH-55656)
- Display:
- Subd objects have clipped sun shadows (RH-53761)
- Splop preview is missing for SubD objects (RH-55561)
- Display - Shading completely broken in current build of 7 WIP - more so with a SubD object (RH-55773)
- Eto:
- Eto Gridview dragging multiple grid rows not working (RH-55157)
- Eto Gridview dragging in editable grid column not working (RH-55301)
- File IO: Missing trimmed surfaces in IGES import (RH-55728)
- MeshIntersect: MeshIntersect finds two intersections, where only one is actually the right answer (RH-55448)
- NamedView: Re-opening floating panel makes problems (RH-55707)
- OpenNURBS: The public opennurbs GitHub repo needs to include the example files (RH-55367)
- Pipe: SubD pipe caps have flipped normals (RH-55652)
- RDK:
- Texture percent doesn’t work in PBR material in Rendered mode (RH-54796)
- NewContentControl DropDown list should have the same size thumbs in the list as the main NewContent Control has (RH-55715)
- When using “GPU render window drawing” LockDib() gets repeatedly called, which leads to executing PEPs on the main thread (RH-55727)
- Rebuild: Value field input is not working right (RH-55614)
- Rendering:
- Apply tone mapping while rendering is intermittent (RH-53385)
- Tone mapping does not stick (RH-53681)
- Renderings using the new PEP pipeline are much brighter (RH-55725)
- Rendering: Materials:
- Changing plastic to custom materials has problems with bump amounts (RH-55635)
- PBR roughness slider is broken (RH-55676)
- Textures are not preserved when moving from Plastic to PBR (RH-55726)
- SDK:
- ON_MeshTree::IntesectLine tolerance issue (RH-29440)
- Make C++ samples RDK compliant (RH-55617)
- SDK: RhinoCommon:
- MeshMeshFast NullReferenceException (RH-55494)
- Move ThumbGrid panel class to Rhino.UI (RH-55577)
- SubD: SubD sub object selections shows additional selections (RH-54200)
- TextField: Block UserText Field (RH-48161)
- UserText: Properties panel resolves Value as error #### (RH-55621)
Crashes Fixed:
- Offset: tl!TL_EvBezier – (NTSTATUS) 0xc00000fd - A new guard page for the stack cannot be created. (RH-50447)
Enhancements:
- Annotation: Text: Draw Frame Option for Annotation (RH-55096)
- LayerStateManager: Add a clickable column header to the layer state manager (RH-52861)
- Rendering: Materials: PBR implementations for template materials (RH-55573)
- SelDup: Add SubD support (RH-55718)
- TextField:
- Attribute User Text on Block Instance resolves as code, not text (RH-55266)
- New ObjectLayer function (RH-55664)
Features Added:
- Display: Add physically-based rendering material support to the Rhino display (PBR material) (RH-51741)
- TextField:
- New BolckAttributeField function (RH-27112)
- TextFields - New “LayerName” textfield (RH-55633)
SDK Enhancement:
- DraftAngleAnalysis: Wrap CRhinoDraftAngleAnalysisSettings (RH-55757)
- SDK: RhinoCommon:
- Support JSON IO (RH-55720)
- Wrap RhAnalysisAdjustMeshes( RHINO_DRAFT_ANGLE_ANALYSIS_MODE_ID ) for RhinoCommon (RH-55758)
Tasks Completed:
- Installer: Remove MeshUtilities plug-in from the installer (RH-55746)
Usability Problems Fixed:
- TextField: Need to be able to move (or hide) the Block Attributes dialog box (RH-55620)
Windows-Only Changes
Bugs Fixed:
- Detail: Detail property page not showing when activiating detail (RH-55512)
- InsertPoint: Unable to split ngon (RH-47797)
- PropertiesPage: Panel content is shifting (RH-55377)
- Rendering:
- Glare (Post effect) is slow (RH-52511)
- Flickering when re-sizing Post effect panel on Windows (RH-55589)
Enhancements:
- NamedView: Display * in viewport title when a named view is modified (RH-52896)
- Rendering: Materials: New "Sort Alphabetically" menu item (RH-46076)
- Rendering: Texture Mapping: Texture property to control the texture mapping method used in assigned materials is needed (RH-54983)
Features Added:
- NamedView: Ability to drag to reorder the items (RH-54425)
UI Change:
3 Likes
brian
(Brian Gillespie)
64
Rhino WIP for Windows and Mac 7.0.19330 is now available!
Bugs Fixed:
- RDK attempts to download textures that don't exist, over and over again (RH-55705)
- Annotation: DimLinear: Made "Mask margins" value box always enabled (RH-55704)
- Commands: 'FieldDictionary.AddTextured(string, Color4f, string)' is obsolete (RH-55847)
- Eto:
- Eto Gridview dragging issues In Layout Panel (RH-55754)
- Eto GridView - cannot double click on editable items (RH-55755)
- File IO: Hookup Z to Y transform for SubD objects in OBJ export. (RH-55831)
- NamedView: Viewport title update on Pan (RH-52929)
- OffsetMesh: Changing to UseVectorLength=No gets different results (RH-55946)
- RDK: CRhRdkSmartFrameBuffer::DrawGPU is provided with wrong rectClip when using render window scrollbars (RH-55779)
- RelocateGumball: Gumball lost with OnSrf (RH-55873)
- ShowEnds: Can't zoom to last end when ZoomEnds is canceled (RH-55924)
- Snapshot: Issues of saving v7 as v6 (RH-55745)
Cosmetics:
- MacroEditor: Use consistent toolbar button class in Macro Editor (RH-55894)
Enhancements:
- Layout: Change order of Layouts by dragging (RH-41070)
- ShowEnds: Clicking the Zoom button brings view back to the current end (RH-55568)
Regressions Fixed:
- Display: Turning on Shadows for Shaded causes an issue with wires (RH-55840)
Usability Problems Fixed:
- ShowEnds: Remember current end in the command session (RH-55943)
Mac-Only Changes
Cosmetics:
- Name should be Rhino followed by a major version (RH-55765)
UI Change:
- Preferences: Themes: Layout section outdated (RH-55480)
Windows-Only Changes
Bugs Fixed:
- Grasshopper: Crashes when running headless in Rhino.Inside (RH-55913)
- NamedView: UndoView does not remove * (RH-55872)
- PropertiesPage: Icons not display full colors (RH-55666)
- RDK: XML validation failed (RH-55753)
- Rhino Inside: Docker no longer works (RH-55798)
Usability Problems Fixed:
- NamedView: Re-order views in the list (RH-6961)
2 Likes
dan
(Dan)
65
Rhino WIP for Windows and Mac 7.0.19337 is now available!
Bugs Fixed:
- Annotation: Text size changes in edit control when changing format (RH-55976)
- Bridge: Shaded subd preview when Join=No (RH-54567)
- Connect: Wrong end with Smooth (RH-55830)
- Display:
- Shaded restores to modified (RH-55784)
- Block Display Optimizations (RH-55886)
- ViewCaptureTo* has been broken for Raytraced (RH-56002)
- File IO: Console application using Rhino.Inside cannot export STL (RH-55938)
- InsertEdge: Flat and smooth edges are both displayed (RH-55404)
- RDK: Ground Plane panel has wrong background color (RH-55858)
- Rendering: Materials:
- SDK for physically based material incomplete (RH-55648)
- Emission in PBR material shouldn’t require a texture (RH-55688)
- Eto UI for double sided material (RH-55786)
- PBR material with Sheen effect applied doesn’t show Sheen UI in the Material panel (RH-55921)
- Split: Splitting a srf or polysurf by a curve partially on surface (RH-4996)
- Stitch:
- Trim: Trim fails on polysurface (RH-55874)
- UDT: Reuse a cage deforms, moves, the captives (RH-55960)
- UI Cleanup: Texture not enabled when adding procedural texture to material slot (RH-56003)
Crashes Fixed:
- This case in GenerateRingEdges is not implemented (2) (RH-53806)
Enhancements:
- Connect: New ExtendOtherCurvesBy=Line/Smooth options (RH-55133)
- ReduceMesh: Added separators in large numbers (RH-55750)
- Reflect: Saves SubD reflection information in 3dm files (RH-55905)
- SubD Editing: : EdgeLoop selection feature for EditPts on SubDs (RH-55903)
Features Added:
- PackageManager: Add command line args to -PackageManager that will pre-fill the search filter on the "Online" tab (RH-55389)
Tasks Completed:
- Help: "Rhino .3dm Import/Export" help doesn't yet have a V7 section (RH-55711)
Windows-Only Changes
Bugs Fixed:
- Reflect: Reflect creates holes and a bad SubD (RH-55889)
Enhancements:
- Reflect: Reflect could use an X or Y axis option (RH-55890)
Features Added:
Mac-Only Changes
Bugs Fixed:
- File IO: Update 3dm file version to 7.0 (RH-55625)
- Reflect: An unknown command on Rhino 7 for Mac (RH-55967)
- UI Cleanup: Rendering panel render size defaults to showing units in inches instead of pixels (RH-56004)
Crashes Fixed:
- Stitch: com.mcneel.rhinoceros.RhCore:-[MRToolPaletteButtonCell doMacro] (RH-55811)
Enhancements:
- Reflect: Reflect could use an X or Y axis option (RH-55968)
- Rendering: Texture Mapping: Texture property to control the texture mapping method used in assigned materials is needed (RH-55802)
UI Change:
1 Like
brian
(Brian Gillespie)
66
Rhino WIP for Windows and Mac 7.0.19344 is now available!
Bugs Fixed:
- Lights property panel doesn't show up in certain cases (RH-54888)
- Connect: Wrong end (RH-56096)
- Cycles:
- Rendering uses incorrect aspect ratios. (RH-53404)
- Glass material doesn’t match / Raytraced vs. Rhino Render (RH-55297)
- Display:
- Material is transparent on Open until edited (RH-55050)
- Memory leaks in display code (RH-55443)
- PBR Displacement texture isn’t being baked (RH-56078)
- Eto: Eto TreeGridView - unselect all when clicking into empty space (RH-55836)
- OffsetMesh: Common normal option (RH-44646)
- OpenNURBS: Bug in ON_SimpleArray<T>::QuickSortAndRemoveDuplicates (RH-55944)
- Rendering:
- Rhino Render Preview for No Environment is wrong (RH-55008)
- Gamma controls on Windows are too bunched up (RH-55587)
- Pick button on Depth of field is not implemented (RH-55588)
- Bad Cycles bump result on PBR material (RH-55710)
- PEP switches are confusing (RH-55916)
- Rendering: Materials:
- More multiples (RH-55740)
- Cycles does not work correctly with new Double Sided material (RH-55787)
- Specularity in PBR doesn’t work (RH-55823)
- PBR Clearcoat bump has no effect in rendered mode. (RH-55835)
- Subnode “Change…” menu item should result in a completely new content (RH-55855)
- Double sided PBR doesn’t work with emission effect (RH-55955)
- Some material names are loaded wrong (RH-56042)
- Silhouette: Draft Curves for Get Silhouette (RH-55954)
- SlideEdge: SlideEdge preview should use the geometry shown for SubD objects (RH-54494)
- Snapshot:
- Double-clicking a snapshot to restore it doesn’t always work (RH-56008)
- Suppress the warning (RH-56095)
- SubD: Can't delete non-manifold parts of SubDs (RH-56093)
- SubD Editing:
- Userdata lost on SubD when a face is moved (RH-55852)
- EditSubDPtOn and EditSubDPtOnRepeat - edit selected subd surface points (RH-55878)
- Trim: Trim - Split V7 Issue (RH-56005)
Cosmetics:
- Menu: Provide link to EdgeContinuity panel from Analyze > Surface menu (RH-53166)
Crashes Fixed:
- SubD: opennurbs!ON_SubDFace::EvaluateCatmullClarkSubdivisionPoint – Access Denied (RH-55607)
Enhancements:
- DraftAngleAnalysis: Porting dialog from C++/MFC to C#/Eto (RH-53794)
- OffsetMesh: New offset direction modes and so on (RH-55213)
- Rendering: Tone mapping GPU support (Clamp, Black/White point, Logarithmic, Filmic, False color) (RH-55780)
- Snapshot: Snapshot UI is confusing (RH-56037)
- SubD Editing: Make EditPtOn command work with SubD objects. (RH-49249)
Tasks Completed:
UI Change:
- Menu:
- Add Stitch to SubD menu > Edit Tools (RH-55956)
- InsertEdge needs to be added to the SubD menu (RH-55957)
- InsertPoint needs to be added to the SubD menu (RH-55958)
- Add Reflect command to the SubD menu (RH-55979)
- Snapshot: Snapshot - Excludes unselected data to avoid tremendously increasing model size (RH-56079)
Mac-Only Changes
Bugs Fixed:
- Display: Rendered mode doesn't show SubD custom mapping (RH-56049)
- NamedView: Re-order views in the list (RH-55912)
- Preferences: Rhino 7 for Mac is stuck in Rhino for Windows theme (RH-55966)
- Rendering: Materials: Sub object materials are not handled correctly when converting from old school (RH-56139)
- ToolPalettes: Rhinoceros/Commands/Customize Item macros background color is white in dark mode (RH-56044)
- Toolbar: Icon "fails" on the Mac -dark mode (RH-54440)
Enhancements:
- Toolbar: RMB macro for SoftTransform (RH-55661)
UI Change:
Usability Problems Fixed:
- Preferences: Snaps panel truncated on first run (RH-55929)
Windows-Only Changes
Bugs Fixed:
- Annotation: Styles: AnnotationStyles crashes when using the Scale all sizes button (RH-54250)
- Display: Rendered mode doesn't show SubD custom mapping (RH-55108)
- PropertiesPage: Object Properties page goes blank when closing the floating panel and reopening the object properties page. (RH-56083)
- Rendering: Materials: Sub object materials are not handled correctly when converting from old school (RH-56100)
- RhinoStart: Rhino window doesn't return to last position on the screen when restarted (RH-52855)
- Snapshot: Not animating material blend amount (RH-56009)
Crashes Fixed:
- :`scalar deleting destructor' – (NTSTATUS) 0xc00000fd - A new guard page for the stack cannot be created. (RH-55528)
- PackageManager: Commands.UI.OnlinePackagesSidePanel.<>c__DisplayClass3_0.<<-ctor>b__27>d.MoveNext () (RH-55806)
1 Like
brian
(Brian Gillespie)
67
Rhino WIP for Windows and Mac 7.0.19351 is now available!
Bugs Fixed:
- CRhinoSettings is unreliable (RH-55242)
- Analysis:EdgeContinuity: Mistakenly opens the ShowEdges dialog (RH-56094)
- Bake: SubD object with spherical mapping bakes completely black (RH-56149)
- Bridge:
- Rename Smoothness option (RH-54570)
- Help button does not open the topic (RH-56298)
- Copy: Issue with SubD face (RH-54438)
- Cycles: Rhino Render does not delete the CRhRdkRenderWindow object (RH-56176)
- DraftAngleAnalysis: Make create parting curves button more obviously connected to the check boxes (RH-56117)
- Gumball: Extrude handle is getting blocked by translation arrow shaft (RH-56165)
- NamedCPlane: Cannot deselect items by clicking at an empty area (RH-55777)
- OSnap:
- Projected osnap tooltip lags on view change (RH-56072)
- Fails on selected meshes (RH-56160)
- Osnap:Vertex:
- Properties: Dash properties macros error (RH-55658)
- RDK:
- Read in old materials as new-style always (RH-50100)
- Assert fired in CRhRdkFrameBufferChannel::GetAllValues (RH-55964)
- Dragging a TextureProxy on the Mac seems to be broken. (RH-56252)
- Reflect: Reflect creates holes in this case (RH-55947)
- Rendering: Materials:
- Keep textures more stable (RH-55363)
- Displacement texture in PBR does nothing (RH-55685)
- Switching from a Custom material to a PBR material doesn’t work well (RH-55700)
- PBR bump direction is wrong (opposite) than what is expected. (RH-55735)
- Texture crossover (RH-55774)
- Optimize ON_Material::PhysicallyBased for Steve (RH-55907)
- Made Brass and Gold colors slightly different (RH-56068)
- Rendering: Realtime SDK: RhRdkBakeTexture does not support PBR channels (RH-56020)
- SelEdgeRing: preview does not highlight the whole ring (RH-56056)
- Select: Can't select the SubD (RH-53910)
- Selection: Sub-object select doesn't work on grouped objects (RH-56102)
- Snapshot: Physical based material property animation support for Snapshots (RH-56142)
- SubD: Valence 2 evaluation bug (RH-54312)
- Textures: Don't combine textures just because they have the same settings (RH-55362)
- ToSubD: ToSubD Selection tune-up - prohibit selection of SubD objects as input (RH-54513)
- Units: Slow redraw (RH-54652)
Cosmetics:
- SDK: RhinoCommon: Use consistent toolbar (or button row) in all panel (RH-55888)
Enhancements:
- Bridge: Edge picking is harder in shaded mode (RH-56122)
- File IO: Imports block descriptions (RH-56137)
- LayerBook: New Stop option (RH-56113)
- SubD: "Align to Object" supports SubD sub-objects (RH-41915)
- What: Added SubD information about damaged components, wire edges, and nonmanifold edges (RH-56120)
Features Added:
- Grasshopper: Placeholder component for keeping files intact during a Read/Write operation. (RH-55420)
- Rebuild: Supports History when Delete Input is unchecked (RH-56271)
Performance Improvements:
- RDK:
- Function needed for quickly getting a contiguous, interleaved array of pixel data from a CPU/GPU channel (RH-55866)
- Function needed for quickly setting a contiguous, interleaved array of pixel data to a CPU/GPU channel (RH-55985)
SDK Enhancement:
- SDK: Need DraftAngle from ON_SilhouetteParameters wrapped (RH-55909)
Tasks Completed:
- ToolPalettes: Add to toolbars (RH-56011)
UI Change:
- Icons: Icon needed for Reflect command (RH-55978)
Mac-Only Changes
Bugs Fixed:
- CRhinoDib fills with the wrong color (RH-55180)
- Print: Rhino incorrectly prints Layer panel (RH-55381)
- Reflect: Reflect creates holes and a bad SubD (RH-55969)
- Toolbar: Toolbar buttons like Quad report Unknown command (RH-56115)
Crashes Fixed:
- Rendering: com.mcneel.rhinoceros.RhMaterialEditor:CRhRdkDocumentDataSource_Rendering::Print() (RH-55076)
Windows-Only Changes
Bugs Fixed:
- Eto: ETO Win DragDrop Source is null (RH-56144)
- InsertPoint: Unable to split ngon (RH-47797)
- NamedView: Named View UI is broken (RH-52463)
- PropertiesPage: Object Properties page goes blank when closing the floating panel and reopening the object properties page. (RH-56083)
- Snapshot: Arrows need a refresh (RH-56211)
- Textures: Information tune up (RH-56128)
- UI Cleanup: Texture drag and drop between Physically Based material slots works differently from old-style Custom material (RH-56076)
Cosmetics:
- UI Cleanup: Background color of Document Properties > Render (RH-55991)
Enhancements:
- ProjectOsnap: New "Project object snaps to CPIane in plan parallel views" option (RH-54162)
UI Change:
- Toolbar: Clean up Mesh Utilities (RH-56131)
2 Likes
brian
(Brian Gillespie)
68
Rhino WIP for Windows and Mac 7.0.20007 is now available!
Bugs Fixed:
- CLK_TCK and CLOCKS_PER_SEC need review (RH-56291)
- Display:
- Far from Origin - Moving to far off location should update display meshes automatically (RH-54464)
- Rendered mode takes a while to get started when loading baked textures (RH-56280)
- DraftAngleAnalysis: Create parting curve needs SubD support (RH-56116)
- File IO: Unexpected "Save changes to Untitiled?" dialog (RH-56244)
- FilletEdge: FilletEdge rejects tangent edges using 1 degree rather than the document's angle tolerance (RH-56332)
- Grasshopper: Callback system for GH exceptions (RH-55315)
- Gumball:
- Face selection and History (RH-56403)
- The far extrusion dot is highlighted (RH-56430)
- InsertPoint: InsertPoint doesn't use Osnaps well (RH-55980)
- NamedSelections:
- Named Selections CTRL+LMB to select sub selections is not working (RH-53643)
- Items doubled on every file save (RH-55088)
- The Save button does not work (RH-56333)
- OSnap: Does not ignore occluded snaps on SubD (RH-56130)
- Offset: Remove the lock in RhinoOffsetCurve in V7 (RH-51839)
- Rendering:
- RenderWindow command is broken (RH-56227)
- Render, Cycles and Material do not use windows system colors (RH-56238)
- Raytraced mode constantly restarts (RH-56331)
- Rendering: Materials:
- PBR displacement doesn’t use applied texture mapping method (RH-56090)
- Mapping doesn’t work for SubD (RH-56133)
- Metal does not work on the back of double-sided (RH-56221)
- SetDocumentUserText: UserText update (RH-56407)
- SubD Editing: SlideEdge breaks SubD display toggle (RH-55557)
- SubD Grips: Mistakenly locks SubD grips (RH-56299)
- Sweep1: History update fails with pline and untrimmed miters (RH-56126)
- TextField:
- TextFields events need to recalculate on Layer rename (RH-55662)
- Area does not work on sub-faces (RH-56439)
- Toolbar: Extra ShowDir button (RH-56312)
- UserText: TextField function refreshing was broken by addition of LayoutUserText (RH-56438)
Crashes Fixed:
- Named Item drag and drop crash (Eto UI) (RH-54487)
- Material Editor crashes (RH-56412)
Enhancements:
- Display: Technical, Artistic and Pen modes support double precision display (RH-37333)
- ExtractSrf: Added SubD support (RH-55789)
- File IO: DGN import is updated to use OpenDesgin 20.8 (RH-56377)
- Layout: Added Layout User Text to Layout viewport (RH-54346)
- Make2D: Added SubD support (RH-56154)
- NamedSelections: Save selection sets in 3dm (RH-50279)
- OffsetMesh: Does FlipAll still make sense? (RH-56138)
- Options: The Save command is added to the never repeat list (RH-56261)
- Rendering: Histogram colors need tweaking (RH-55915)
- TextField: New PointCoordinate function (RH-56140)
Features Added:
- SubD: New command (RH-56132)
- TextField: Remove "Page Contents" from Layout Properties and TextField (RH-55063)
Tasks Completed:
- Mesh utilities for SubD: Port code from C# plug-in into RhinoCore as C++ (RH-51786)
UI Change:
- Icons: Add to toolbar (RH-56153)
- Panels: Add the panel icon (RH-55020)
- TextField: Add "World" to PointCoordinate description (RH-56440)
- Toolbar: LayerBook stop button icon (RH-56134)
Mac-Only Changes
Bugs Fixed:
- Grasshopper: Components: Curve Explode fails on Nurbs curves (RH-55318)
- ProjectOsnap: New "Project object snaps to CPIane in plan parallel views" option (RH-56275)
- Rendering: Materials: Select material by typing first letter (RH-45084)
- Textures: Rename does not work for Texture Proxies (RH-52793)
- ToolPalettes: Change image background color in button editor (RH-56297)
- Toolbar: Clean up Mesh Utilities (RH-56196)
Crashes Fixed:
- Layout: Remove "Match" from Layout User Text on Mac (RH-56329)
- Properties: Picking Render Properties Crashes Rhino (RH-55896)
Enhancements:
- Insert: New "Prompt to scale on import" checkbox (RH-56352)
Features Added:
- Eto: Custom tooltips or cursors for Eto Drag and Drop (RH-49821)
Windows-Only Changes
Bugs Fixed:
- Context Menu: Lights do not count (RH-55513)
- Delete: Delete key must be pressed twice (RH-55496)
- History: May not turn off for one-shot (RH-56402)
- Make2D: AggregateException: One or more errors occurred. (RH-53599)
- Print: Print Units Not Sticking between sessions (RH-56373)
- Rendering: Time discrepancy (RH-55703)
Enhancements:
- History: Pane menu is not accessible while a command is running (RH-56396)
- Insert: New "Prompt to scale on import" checkbox (RH-55936)
- Layout: New "Combine Layout Tabs" item in the view tab context menu (RH-56338)
Features Added:
- Layer: Disable delete key handler in layer manager list control (RH-56405)
UI Change:
- Rendering: Materials: Make IOR list easy to discover on Windows (RH-55489)
brian
(Brian Gillespie)
69
Rhino WIP 7.0.20014 is now available for Windows and Mac!
Bugs Fixed:
- BlendCrv: Jumps to another location when editing (RH-56417)
- BlockEdit: BlockEdit linked-embedded block default (RH-52538)
- Cylinder: Bounding Box option added to several commands by mistake? (RH-56449)
- DevLoft: Ruling changes with density (RH-56473)
- Display:
- Drop Material on view - broken in rendered mode (RH-55965)
- Shiny material becomes yellow in Rendered mode (RH-56465)
- GetObjectAt causes display problems in layouts (RH-56478)
- Eto: Eto Color Button Inaccuracy (RH-54529)
- FitSrf: Cannot cancel (RH-56434)
- MeshSplit: Despite edge×edge, this must split (RH-56101)
- Properties: New Layouts object properties page has border (RH-54736)
- Rendering:
- Cycles render threads should be THREAD_PRIORITY_BELOW_NORMAL (RH-56019)
- PEPs slow for Kyle, are they not executing on the GPU? (RH-56363)
- Rendering: Materials: No way to invert the bump direction in the PBR UI (RH-55636)
- Rendering: Texture Mapping: Surface mapping for SubD objects is not useful (RH-56335)
- SDK: RhinoCommon: Intersect.MeshMesh function (RH-54662)
- Sweep2: Refit rails at the command line (RH-56374)
- TextField: Remove Page Content (RH-55860)
Crashes Fixed:
- SDK: RhinoCommon: Object reference not set… ETO. (MERGE) (RH-48366)
Enhancements:
- DupEdge:
- Layout: Detail caching boosts detail view drawing performance (RH-56503)
- RhinoStart: Tune up RhinoScript material methods to be RDK compliant (RH-56284)
Features Added:
- Display: Function needed to enable Rhino's OpenGL context (offscreen window) (RH-54815)
- Viewports: Lock viewports (RH-1335)
Regressions Fixed:
- Subobject Selection: Subobject Selection Filter issue in V7 (RH-55927)
UI Change:
Mac-Only Changes
Bugs Fixed:
- Cycles: RhinoCycles does not appear to work in latest RhinoWIP for Mac (RH-56486)
- Extend: Cursor tune up (RH-54684)
- Interface: Match behavior with Windows (RH-54683)
- NamedSelections: Crash when dragging an item (RH-55516)
- RDK: PEP code asserts on Mac when creating a new material (RH-56418)
- Rendering: Time discrepancy (RH-56339)
- Textures: Texture thumbnails incorrect (RH-56155)
Enhancements:
- Block: The dialog box for browsing missing linked block files displays the path and filename of the missing file (RH-55612)
Windows-Only Changes
Bugs Fixed:
brian
(Brian Gillespie)
70
Rhino WIP 7.0.20021 is now available for Windows and Mac
Bugs Fixed:
- SubD to Brep - investigate and improve G1 continuity at extraordinary vertices. (RH-53274)
- DupEdge: Curves with History from surface/mesh edges won't update (RH-56520)
- QuadReMesh: QuadRemesh by edge length jumps from .1 to .001 crippling Rhino (RH-56456)
- Rendering: Asynchronous baking for Cycles textures should be turned off for production rendering (RH-56507)
- Rendering: Texture Mapping:
- Bounding Box mapping for Sphere and Cylinder is broken (RH-56521)
- WCS mapping fix is broken (RH-56522)
- SplitMeshWithCurve: Needs double precision mesh before split (RH-56568)
Enhancements:
- ExtrudeCrv: Ignore Planar for extruding (RH-56459)
- Help: Dithering in Post effects (RH-56384)
- OffsetMesh: OffsetMesh - New Preview option (RH-56581)
- QuadReMesh: QuadRemesh - Transfer Material/ Mapping from input object to remeshed object (RH-56548)
- SubD: DimArea, Area and Volume text fields support SubD (RH-56442)
- UDT: New TargetSurface option that uses surface normal for object orientation (RH-56357)
Features Added:
- NamedView: Remove "Lock named view" checkbox to reduce confusion (RH-56512)
- Viewports: New command (RH-56223)
SDK Enhancement:
- SDK: RhinoCommon: Add ToARGBArray for Mesh vertex colors (RH-56582)
UI Change:
Usability Problems Fixed:
Mac-Only Changes
Bugs Fixed:
- Annotation: Hatch: Color Dialog fix for mac OS in gradient control creates endless color stops (RH-55481)
- Interface: Cursor unstable (RH-56537)
Windows-Only Changes
Bugs Fixed:
Enhancements:
- Grasshopper: Grasshopper About/Splash screen has a woefully old Copyright date… 2009 (RH-56489)
1 Like
brian
(Brian Gillespie)
71
Rhino WIP 7.0.20028 is now available for Windows and Mac
Bugs Fixed:
- SDK: Support VS2019 in Rhino 7 SDK (RH-56476)
- SDK: RhinoCommon: LayerTable.Purge not working for parent layers (RH-55695)
- SrfSeam: Remember the direction setting (RH-56625)
- ToSubD: ToSubD selects polysurfaces (RH-54368)
- UDT:
- Made TargetSurface option pay attention to surface normal direction (RH-56566)
- Flow, Gumball and pre-select (RH-56646)
Crashes Fixed:
- File IO: Stack overflow in tl.TL_NGonFinder.FindFacesInNgons() during Export (RH-53697)
Enhancements:
- SDK: RhinoCommon: Expose RhGetDrawListSerialNumbers (RH-56649)
- TextObject: UI improvements for engraving fonts (RH-48090)
- UserText: New "Paste key and value to all layouts" option (RH-55885)
Features Added:
- MeshSplit: Ngon can be retained (will not be triangulated) (RH-53553)
- RibbonOffset: create command line version of ribbon offset tool (RH-52990)
Tasks Completed:
- Toolbar: SubD output for 3dFace (RH-55933)
Mac-Only Changes
Features Added:
Windows-Only Changes
Bugs Fixed:
- MergeCrv: MergeCrv & high degree (RH-56591)
- NamedView: Cancel renaming duplicates "(Locked)" (RH-56586)
- Viewports: Listed as "Locked" in context menu (RH-56585)
brian
(Brian Gillespie)
72
Rhino WIP 7.0.20035 is now available for Windows and Mac
Bugs Fixed:
- 3DFace: Cannot append from mesh edges (RH-56602)
- Annotation: Linetype: Copies are always continuous (RH-56574)
- CollapseMeshFace: CollapseMeshFace hangs when selecting an Ngon (RH-56609)
- Curvature: Not working properly when the curvature maxima are at curve ends (RH-56657)
- ExtendSrf: ExtendSrf fails (RH-55037)
- RDK: Rhino Render Preview Request takes a long time. (RH-54960)
- Rendering: Texture Mapping:
- Shader driven WCS display needs to respect OCS mapping origin (RH-56517)
- Baking of WCS textures needs to respect OCS origin (RH-56519)
Crashes Fixed:
- RDKCrash: :FastMakeCopy – Access Denied (RH-56530)
Enhancements:
- BlendSrf: The Edit option temporarily turns off History locking (RH-56232)
- Block: Attributes Should Pre-Populate Key Values (RH-56653)
- MatchMeshEdge: Skips prompts and options when meshes are preselected (RH-56699)
- Mirror: New ZAxis option, and now uses CPlane axes instead of World axes (RH-55646)
Features Added:
- File IO: Supports exporting group names and indexes (RH-56564)
- TextField: New LayoutUserText function (RH-56337)
Regressions Fixed:
- NamedPosition: Remember Named Positions (RH-56648)
UI Change:
- SubD: SubD - Update descriptive notes for commands (RH-56540)
- TextField: Update Note in "Layout User Text" Field dialog (RH-56627)
- Toolbar: Add to toolbar (RH-56511)
Mac-Only Changes
Bugs Fixed:
- Annotation: Hatch: Apply color change when Select Color dialog is closed (RH-55142)
- NamedView: Cancel renaming duplicates "(Locked)" (RH-56733)
Crashes Fixed:
- RDKCrash: RhinoWIP crashes on New Model on macOS High Sierra 10.13.6 (RH-56688)
Windows-Only Changes
Bugs Fixed:
- Display: Decal makes object white in Rendered Mode (RH-56330)
- SDK: Rhino 7 SDK creates plug-ins that reference the Rhino 6 SDK (RH-56663)
2 Likes
brian
(Brian Gillespie)
73
Rhino WIP 7.0.20042 is now available for Windows and Mac
Bugs Fixed:
- Need a way to open a content in an editor (RH-56652)
- Rendered mode ignores different OCS frames between objects (RH-56843)
- Analysis:EdgeContinuity: Edge pairs are partly forgotten (RH-56864)
- Block: Redefining Block With Attributes Gives Odd Result (RH-56659)
- BlockEdit:
- BlockEdit and hidden objects (RH-46745)
- SubD objects vanish from edited blocks (RH-56744)
- Bridge: Fails on SubD (RH-55084)
- Cap: Splits surface with kink (RH-56463)
- Cycles:
- Shaders with emission don’t update properly (RH-45394)
- ViewCaptureTo* commands may crash with Raytraced (RH-55421)
- Support for >100 texture amounts in PBR material (RH-56562)
- No repeat texture leaves a gap (RH-56694)
- Display:
- Dragging materials on objects that have PBR emission already assigned (RH-56561)
- Fixed Rendered mode showing 360 degree environment stitch seam (RH-56605)
- ExtendSrf: ExtendSrf not extending when entering a numeric value (RH-56188)
- File IO:
- Grasshopper: Components: Grasshopper Component QuadRemesh - Black mesh in Rendered display mode (RH-56824)
- Lasso: Lasso selects clipped objects (RH-56668)
- MeshIntersect:
- Gappy mesh intersect (RH-49268)
- MeshIntersect ‘ESC’ cancellation shows Bug dialog (RH-54842)
- MeshSplit:
- Double segments (RH-8803)
- MeshSplit ‘ESC’ cancellation shows Bug dialog (RH-54651)
- OffsetMesh: Added FlipAll back and changed Preview to DynamicPreview (RH-56743)
- QuadReMesh: QuadRemesh cancel out when Preview is being calculated (RH-56107)
- Rendering: Materials:
- Double click behavior in Eto based numeric control (RH-55879)
- PBR displacement doesn’t work in Raytraced mode (RH-56089)
- Remove “Share materials” from Advanced options (RH-56240)
- Drag arrow in TextStepper control feature (RH-56303)
- Diner model takes a long time to load (RH-56410)
- PBR control tune-up (RH-56428)
- SDK: GHPython: Document RH-53391 (RH-53718)
- SoftTransform: SoftTransform command line message should be more specific (RH-55506)
- SubD: ON_SubDFace ON_BrepFace - Add MaterialChannelIndex property. Correct obsolete comments. (RH-56811)
- Subobject Selection: Subobject picking doesn't work with Transparent Grid in Shaded mode (RH-56818)
- TextField: Notes lose hard returns (RH-56706)
- UDT: History may not update properly when target surface is used (RH-56784)
- UnWeldEdge:
- Creased edges in subd can’t be separated but can be on meshes (RH-53257)
- Now separates control vertices on SubD (RH-54034)
Crashes Fixed:
- Geometry Core: ntdll!RtlpFindAndCommitPages – (NTSTATUS) 0xc00000fd - A new guard page for the stack cannot be created. (RH-56891)
- InsertPoint:
- InsertPoint - Crashes Rhino on this model (RH-56436)
- InsertPoint on SubD crash (RH-56551)
- InsertPoint crashes on this SubD (RH-56730)
Enhancements:
- BlockEdit: Allows to cancel if objects are hidden/locked in the editing (RH-46746)
- Bridge: Greater bulge is required when straightness is set to 0 (RH-56274)
- GumballAlignment: New Align to View option (RH-56414)
- MatchSrf: History locking allows editing control points of matched surfaces (RH-56285)
- NamedView: Made overwrite not possible when "Lock named view" is enabled (RH-32726)
- OSnap: Allows Near on edge of plane when Cen is enabled (RH-56862)
- OffsetSubD: OffsetSubD needs a Flip option (RH-56702)
- Revolve: Ends of the revolving axis can be attached to objects using object snaps when History is recorded (RH-2868)
- SubD Editing: Supports moving SubD control points (RH-56771)
- Sweep1: Remember the refit setting between sessions (RH-55398)
- TextField: New command (RH-56654)
Features Added:
- ExtrudeMesh:
- File IO: Attribute User Text and ACAD xData can be exchanged (RH-55484)
- QuadReMesh: New QuadRemesher component (RH-54904)
- SDK: RhinoCommon: New Mesh NGon C++ SDKs need to be wrapped in RhinoCommon (RH-40903)
Regressions Fixed:
- ClippingPlane: CheckBox in Properties (RH-56696)
SDK Enhancement:
- SDK: Supports converting Revit Hermite surface to NURBS (RH-55629)
- SDK: RhinoCommon:
- Wrap ON_HermiteSurface for RhinoCommon use (RH-56615)
- Expose RhinoCleanUpPolyCurve to RhinoCommon (RH-56689)
Mac-Only Changes
Bugs Fixed:
- Cycles: Raytrace initializes slowly (RH-56471)
- DevLoft: DevLoft - SubCrv display persists (RH-49514)
- Grasshopper: GradientHatch component, removed boundary in preview (RH-56901)
- LoadPlugin: Removed plug-ins on Mac still appear in the plug-in manager (RH-56834)
- Menu: Add SubD commands to the SubD menu (RH-56779)
- MergeCrv: MergeCrv & high degree (RH-56656)
- NamedView: "Restore Named View" missing in viewport title menu on Mac (RH-56468)
- Orient3Pt: Orient3pt only translates one geometry (RH-56745)
- Preferences: Add _ShowToolPalette to the Do Not Repeat list (RH-56726)
- ToolPalettes: Floating Tool palettes Disappear (RH-56725)
Enhancements:
- Grasshopper: Grasshopper About/Splash screen has a woefully old Copyright date… 2009 (RH-56595)
Features Added:
- File IO: Added UseCompressionWhenSaving advanced settings (RH-34937)
- Grasshopper: New Hatch component (RH-56623)
Windows-Only Changes
Bugs Fixed:
- AutoSave: Pays attention to the "Save render mesh" option in Options > Files (RH-53781)
- Eto:
- ETO NumericStepper UI style (RH-56665)
- Window.Closing and Window.Closed events not getting raised when calling Close() (RH-56750)
- ExtrudeMesh: Using gumball extrude on mesh face creates a bad object (RH-56251)
- Grasshopper: GradientHatch component, removed boundary in preview (RH-56747)
- RDK: TextureProxy rename on thumb (RH-56734)
UI Change:
- Menu: Add SubD commands to the SubD menu (RH-56700)
brian
(Brian Gillespie)
74
Rhino WIP 7.0.20049 for Windows and Mac is now available
Bugs Fixed:
- Bevel: Bevel fails if creases are not kept (RH-56748)
- BlendSrf: BlendSrf rail start points aren't maintained correctly (RH-56881)
- CutPlane: CutPlane is short (RH-56956)
- Display:
- Raytraced display mode is slowed down by many lights (RH-56409)
- Texture issues with blocks (RH-56514)
- Slow text editing on layouts (RH-57041)
- Eto: Eto numeric edit control behaves erratically (RH-56865)
- Gumball: Extrusion removes face (RH-56671)
- InsertPoint: InsertPoint makes holes (RH-56884)
- Installer: Installer is missing source files for Cycles kernel compilation (RH-57069)
- InterpCrvOnSrf: Loses smooth seam (RH-56938)
- Mesh: Cannot set CapFaceStyle=Tri (RH-56969)
- MeshSphere: Ugly quad caps (RH-56970)
- Rendering: Materials:
- “Plastic” with a bump setting produces bad results (RH-55972)
- More usable SSS radius (RH-56460)
- Rendering: Texture Mapping: Broken on SubD (RH-56523)
- RotateView: Shift between parallel and perspective does not use default lens length (RH-56910)
- SDK: RhinoBrepSplit with multiple curve cutters does nothing if a curve does not cut (RH-55570)
- SplitEdge: Duplicates edges (RH-54577)
- Trim: Trims too much (RH-4609)
- UVEditor: Procedural textures preview black in Rendered view (RH-56736)
Enhancements:
- Bevel: Bevel default segments seem too high (RH-56781)
- Gumball: Remember zero (RH-56889)
- InterpCrvOnSrf: Changed to not automatically record History (RH-56936)
- OSnap: Snaps to polygon face center on polysurface (RH-56863)
Performance Improvements:
- NamedView: Thumbnail mode: Switching between views is slow (RH-56728)
Tasks Completed:
- Thicken: Remove Thicken from Rhino 7 WIP (RH-44645)
UI Change:
Usability Problems Fixed:
- Eto Named Items usability problem (RH-54488)
Mac-Only Changes
Bugs Fixed:
- ExtrudeMesh: Using gumball extrude on mesh face creates a bad object (RH-56905)
- Rendering: Materials: Tree view of materials isn't a tree (RH-55425)
- SDK: RhinoCommon: New RhinoCommon class and command name does not match the filename (RH-56166)
- Settings: Document User Text icon missing (RH-57014)
- Sweep2: Remember the refit setting between sessions (RH-56961)
Windows-Only Changes
Bugs Fixed:
- IOR control throws exception (RH-56425)
- Properties: Icon display glitch in v7 (RH-56949)
- Rendering: Materials: Fixed nothing found if there is a capital letter in the search string. (RH-56792)
brian
(Brian Gillespie)
75
Rhino WIP 7.0.20056 for Windows and Mac is now available
Bugs Fixed:
- ClippingPlane: Views Clipped - Checkbox issue (RH-57036)
- Cycles: PBR emission crashes when used as double-sided material entry in Raytraced viewport (RH-56967)
- Display: transparent layer - objects blocks wires (RH-57164)
- Eto: Splitter position reset when used on a TabPage in a TabControl (RH-54722)
- Gumball:
- NamedSelections: NamedSelections hang around after file new (RH-56983)
- NamedView:
- Saving named view sometimes copies the named view (RH-56911)
- Buggy support for clipping planes (RH-57043)
- Rendering:
- Defaults for ‘logarithmic’ (RH-43122)
- Eto PEP sections can’t be closed (RH-56324)
- Eto PEP UI splitter position weirdness (RH-57080)
- Post Effects - Selection Load/Save with the document (RH-57111)
- Rendering: Materials: Metals look different in the WIP (RH-56992)
- Rhino Inside: Rhino Render (ccycles.dll) fails to load in Rhino Inside Revit (RH-56927)
- SlideEdge: SlideEdge should not allow verts to stack as it makes the command fail (RH-56260)
- Splash and About: Splash screen no longer shows the "Recent" tab when Debug Rhino starts… (RH-45786)
- Split: Option needed in Split to NOT use apparent intersections or projections… (RH-55574)
- SubD:
- Error of extruding SubD with Gumball (RH-53616)
- Reflect: Made Undo not break automatic update (RH-57005)
- SubD Editing:
Cosmetics:
- BlockManager: Deleting a block deletes layer by layer (RH-57121)
Crashes Fixed:
- Rendering: Realtime SDK: Rendering Realtime SDK: Crash in new OCS texture mapping when trying to use Grasshopper through ChangeQueue (RH-57042)
Enhancements:
- Bevel: Bevel - Now works on SubDs in flat appearance (RH-55359)
- Bridge: Works with pre-selected edge chains (RH-49850)
- Help: ToSubD topic improvement (RH-56775)
- TextField: AddMissingBlockAttributeKeys: Key is restored to both key and value fields (RH-57108)
Features Added:
- TextField: AddMissingBlockAttributeKeys: New command (RH-56715)
SDK Enhancement:
- SDK: RhinoCommon: SDK RhinoCommon: Added Draco compression support (RH-57044)
Tasks Completed:
- Toolbar: ExtractControlPolygon: Added to SubD Sidebar (RH-56608)
UI Change:
- Block: AddMissingBlockAttributeKeys: Add to menu (RH-56854)
- ExtrudeMesh: Add to toolbar (RH-56909)
- Toolbar: Bevel: Add to SubD Tools toolbar (RH-56672)
Mac-Only Changes
Bugs Fixed:
- Panels: Added the "Layout and detail layer information" panel back to Rhino 7 WIP for Mac (RH-57134)
- Snapshot: Snapshots command does not open the panel in Rhino 7 WIP for Mac (RH-57148)
Crashes Fixed:
- RDKCrash: RDK: Crash when viewing Materials panel in macOS 10.13.6 (RH-57094)
- Splash and About: Splash: Crash during initialization (RH-57074)
Windows-Only Changes
Bugs Fixed:
- Installer: Windows Smartscreen warning message appears with every install. (RH-55729)
- Panels: Properties is clipped and not drawing fully (RH-57000)
Enhancements:
- Headless: Rhino Compute: Supports exporting SVG in headless mode (RH-57097)
1 Like
brian
(Brian Gillespie)
Split this topic
76
13 posts were merged into an existing topic: What’s New for Rhino WIP is strange
brian
(Brian Gillespie)
77
Rhino WIP 7.0.20064 for Windows and Mac is now available
Bugs Fixed:
- Bake: QuadRemeshing: Crashes Rhino in Rendered mode (RH-57001)
- Bridge:
- Make it work with face selections (RH-49917)
- Doesn’t update the Reflect child side (RH-57003)
- Display:
- Supports layer and object transparency on meshes in Shaded mode (RH-57143)
- Depth Sorting incorrect for Transparent Layers (RH-57217)
- DupEdge: DupEdge from Extrusion doesn't support history (RH-57205)
- ExtrudeMesh:
- Bad default base point for SubD (RH-56965)
- Restricts selection to mesh and SubD boundary edges (RH-56997)
- ExtrudeSrf: ExtrudeSrf allows SubD selection but doesn't do anything (RH-57071)
- FBX: FBX import - SubD creases are not added properly (RH-57242)
- Gumball: Made SubD creases stay creased when extruded (RH-57006)
- Helix: Radius control does not update (RH-39041)
- Lasso: Region selection - Selecting pointcloud points pays attention to clipping planes (RH-57262)
- MatchProperties: Right-clicking a checkbox may not clear all the others (RH-57141)
- RDK: PBR Section sometimes changes scroll position if a texture is turned on or off. (RH-57019)
- Reflect:
- SubDivide doesn’t immediately update the child side (RH-57208)
- Fill doesn’t update immediately when used with Reflect (RH-57214)
- Rendering: Materials:
- Rendering Materials: PBR Metallic undo doesn’t work properly (RH-56986)
- Rendering Materials: Crash on creating from texture files (RH-57135)
- SDK: RhinoMergeBreps is different from the NonmanifoldMerge command (RH-56919)
- SlideEdge: Numeric input is delayed in command-line (RH-49890)
- SmartTrack: SmartTrack and distance constraint (RH-57171)
- Splash and About: Move profile image loading out of startup sequence (RH-51548)
- Split: May not work on some objects (RH-30701)
- SplitEdge: SplitMeshEdge: Freeze on SubD (RH-51710)
- Stitch:
- Display SubD in Flat mode to help picking SubD vertices (RH-54961)
- Result is not valid (RH-56343)
- SubD: Document a process for converting T-splines models to SubDs (RH-56897)
- Surface-surface intersection: Surface intersecting: Memory leak (RH-53732)
- Toolbar: EnterEnd: Fails to finish the command (RH-57107)
Crashes Fixed:
- File IO: Export Command: rdk!CRhRdkContent::CImpl::RenderCRCRecursive – Access Denied(MERGE) (RH-57162)
- Stitch:
- Crashes on a model (RH-56952)
- Stitch Command: RhinoCore!Mu7::StitchCommand::RunCommand – Access Denied (RH-57066)
Enhancements:
- ArraySrf: New Mode=UV/Isocurve and Preview options (RH-57287)
- FBX:
- File IO 3DS/FBX: Added UI to FBX import dialog to choose between mesh and SubD objects (RH-56896)
- 3DS/FBX Import: New :Open/Import meshes as SubD surfaces" option (RH-56978)
- File IO: SVG Export - Supports exporting transparent objects (RH-57147)
- MatchSrf: Remembers Perpendicular to target edge setting (RH-57153)
- Reflect: Supports History (RH-55845)
Features Added:
- DupBorder: Added History support (RH-56569)
- Grasshopper: Help menu: Add link to Community Component Reference (RH-57040)
UI Change:
- SubDivide: DeleteInput=Yes/No is removed (RH-57238)
Mac-Only Changes
Bugs Fixed:
- Licensing: Single Computer: Licensing Single Computer: Circle and SubD primitives can't be created. (RH-57113)
- Preferences: Display: Clipping plane objects color usage goes weird when you switch from Plane color to solid color (RH-57186)
- RDKCrash: RDK: Crash while assigning picture material (RH-56457)
- SelectionFilter:
- Made “Others” works properly with decal widgets (RH-53517)
- Needs to use ETO panel on Mac (RH-57160)
- Selection Filter: Refresh the check boxes (RH-57211)
- Snapshot: Import behavior incorrect (RH-57181)
Windows-Only Changes
Bugs Fixed:
- Append: Select meshes to append to as the first step (RH-46310)
- Color Picker:
- Properties: Properties Panel - Flickers while mouse moves over icons (RH-57077)
- PropertiesPage: Material Properties: Does not display ETO sections on Windows (RH-57224)
- Toolbar: Inset icon tooltip needs 'SubD' added (RH-57178)
1 Like
brian
(Brian Gillespie)
78
Rhino WIP 7.0.20071 for Windows and Mac is now available
Bugs Fixed:
- 3DFace: Appending with Interpolated=Yes moves existing SubD edit points (RH-57275)
- BlockManager: Changing Block def name should raise doc change events (RH-57114)
- Cycles:
- Unstable update with physically based materials (RH-55660)
- Black renderings in DEBUG Rhino with GPU (RH-56785)
- Display:
- White centers of points should be transparent (RH-57290)
- Transparent points occlude GH Preview (RH-57303)
- Eto: Slider thinks everything is 0 to 100 (RH-57139)
- GetPoint: SnapToMeshObject forbids picking points off selected meshes (RH-57370)
- History: Editing grips turns off history locking (RH-57289)
- InsertPoint:
- Insert extra points on SubD (RH-56415)
- Undo should not switch to Flat SubD (RH-57368)
- Installer: Preparing Plug-ins for First Use (RH-56720)
- Layout: Size may not update in Layouts panel (RH-54357)
- OpenNURBS: ON_SumSurface copy constructor and operator= need work (RH-43931)
- Options: Reset to defaults error with construction plane options (RH-57267)
- Print: Can not preview the print (RH-57220)
- QuadRemesh:
- A particular mesh produces a blocky result (RH-56387)
- Fails if mapping method is Box (RH-56589)
- Should not allow sub-object selections (RH-57177)
- QuadReMesh: Open source acknowledgements (RH-57299)
- Rendering: Feather-setting for Fog in PEP needs more precision (RH-55641)
- Rendering: Materials:
- Rendering: Materials: PBR undo very slow (RH-57197)
- Rendering: Materials: PBR material changes are too slow (RH-57198)
- Rendering: Materials: Crash while adding texture to PBR material through GP settings floating panel (RH-57358)
- SDK: RhinoCommon: SDK: RhinoCommon: Needs some kind of view modified event (RH-56556)
- SelVisible: SubD objects are not selected (RH-57250)
- Selection: Ghosted picks of mesh edges not working (RH-57293)
- SlideEdge:
- Slide: Does not clear the selected mesh (RH-50092)
- Can’t Slide SubD edges when control points stack (RH-51819)
- Split: works with this curve in perspective view… should it? (RH-46534)
- Toolbar: Mouse-over hint rewording (RH-57257)
- Trim: Failure (RH-56923)
Cosmetics:
- Properties: Panel flickers when scrolling the Plug-ins list in Rhino Options (RH-56991)
Crashes Fixed:
- SubD: Crash after double-clicking edge on big SubD (RH-57319)
Enhancements:
- Annotation: Text: Annotation: Text: Single Stroke Fonts display better in Text/TextObject edit box (RH-50123)
- QuadRemesh: Allow group selection when picking guide curves (RH-57173)
- Selection: SelConnected works with SubD control points and edit points (RH-57316)
- UDT: CageEdit - SubD can be captive object (RH-57176)
Features Added:
- GetPoint: New SnapToMeshObject command (RH-52710)
- SubDAppearance: New SubDDisplayToggle command (RH-55232)
Regressions Fixed:
- Display: Front wires are transparent in Ghosted mode (RH-57295)
- Explode: Missing layer material names when referenced blocks are exploded (RH-57046)
SDK Enhancement:
- SubD: Add C++ SDK SubD tool to remove zero length edges (RH-57274)
Tasks Completed:
- OpenNURBS: Document RDK functions in ONX_Model (RH-57280)
UI Change:
- Toolbar:
- Add ConvertTextToBlockAttribute command (RH-56822)
- Add AddMissingBlockAttributeKeys command (RH-56855)
- Add SubDDisplayToggle command (RH-57004)
Mac-Only Changes
Bugs Fixed:
- Enable RH_WRITE_DEBUG_REG in -DebugLog (RH-57302)
- Display: Color reduction in display modes doesn't stick (RH-56993)
- Layout: Current indication (bold) does not stick (RH-54973)
- Snapshot: Deleting Materials in Snapshot doesn't always update Snapshot (RH-56147)
UI Change:
- Menu: Add missing items in viewport title menu on Mac (RH-57199)
Windows-Only Changes
Bugs Fixed:
- Installer:
- Rhino 6 loads some plug-ins from V7 WIP (RH-43707)
- Rhino 7 SDK installs property sheets which still reference Rhino 6 registry keys (RH-50329)
- Rendering: Missing render content (RH-50331)
Enhancements:
- UI Cleanup: Resize ImportLayout dialog box (RH-57252)
UI Change:
- Menu: Add SubDDisplayToggle command (RH-57354)
2 Likes
brian
(Brian Gillespie)
79
Rhino WIP 7.0.20077 for Windows and Mac is now available
Bugs Fixed:
- Rdk_Globals_ShowColorPickerEx needs to allow custom color lists from .NET (RH-54674)
- Cycles:
- RenderWindow command has no effect (RH-54820)
- RenderWindow is slower than Raytraced mode (RH-56791)
- Export: File IO: Rhino Block Attributes Do Not Import into AutoCAD (RH-56673)
- File IO: File saved with Arial shows Missing Font warning in Mac Rhino (RH-57343)
- InsertEdge:
- Can not select edge position (RH-56972)
- Preview doesn’t work if an edge ring is selected (RH-57382)
- InsertPoint:
- NamedSelections:
- Duplicate on panel resize (RH-57352)
- Redo does not always bring back a previously deleted subobject (RH-57353)
- Rendering: Fog Post Effect - Area flipped in Y (RH-57351)
- Rendering: Materials: Rendering Materials: Metallic checkbox in PBR material doesn't work properly (RH-56987)
- ShowCamera: F6 Camera widget is broken (RH-57369)
- ToSubD: Mesh ngon with a hole is ignored (RH-41709)
Crashes Fixed:
- Split: RhinoCore!CCommandSplit::RunCommand – Access Denied (RH-57155)
Enhancements:
- BooleanDifference: BooleanDifference/BooleanSplit: Allows objects in block instances as cutters (RH-57350)
- File IO: Supports reading Solidworks files up to version 2020 (RH-57386)
- Inset: Preselect a mesh or SubD to inset every face of it (RH-57179)
- Pull: Supports pulling points and curves onto SubD objects (RH-53322)
- RDK: Find way to remove need for const_cast in realtime display mode code (RH-57371)
- Reflect: New RemoveExistingSymmetry option (RH-57204)
- Rendering: Post-Effects: Brightness/Contrast/HSL/Multiply on GPU (RH-57312)
- Selection: Allows selecting a range of control points on a curve, surface, or SubD (RH-55928)
Features Added:
- Intersect: New IntersectSelf command (RH-55474)
Performance Improvements:
- Cycles:
- Render tile optimization: Don’t copy all buffer passes if they’re not needed (RH-57193)
- Render tile optimization: Optimize get_pass_rect (RH-57194)
- Render tile optimization: The Cycles pixel buffer is upside-down compared to the RenderWindow channels (RH-57195)
SDK Enhancement:
- SDK: Add functions to remove fins from nonmanifold Breps (RH-57123)
UI Change:
- Menu:
- Toolbar: Add IntersectSelf command (RH-57023)
Usability Problems Fixed:
- 3DFace: Made Append options sticky in current or between session(s) (RH-56619)
Mac-Only Changes
Bugs Fixed:
- File IO: Revert on macOS shows Missing Font warning (RH-57342)
- Layout:
- Crash on Print After Layout Rearrange in Inspector (RH-55056)
- Trouble Dragging (RH-56650)
- No subsystem: Use latest PanelingTools source for MacRhino (RH-54746)
- SelectionFilter:
- Should not reset when a second panel is opened on Mac (RH-57334)
- Status bar button does not reflect current enabled state (RH-57393)
- Snapshot: Imported snapshot has all options enabled (RH-57180)
Tasks Completed:
- Toolbar: Add icons for new selection filter commands (RH-57306)
UI Change:
- Toolbar: Inset icon tooltip needs 'SubD' added (RH-57305)
Windows-Only Changes
Bugs Fixed:
- MoveFace: Selection highlight issue (RH-49503)
- PluginManager: Remove Rhino 6 Plug-in Update dialog from Rhino 7 (RH-54690)
- Snapshot: Imported snapshot has all options enabled (RH-56036)
- Toolbar: SoftTransform RMB macro is not in SubD side bar (RH-57237)
Enhancements:
- Layer: Sorting by column header can be undone (RH-31839)
- Panels: Added Move up and Move down buttons to Named Views, CPlanes, and Positions panels (RH-56213)