# Push pull command

**URL:** <https://discourse.mcneel.com/t/push-pull-command/215435>\
**Category:** Serengeti (Rhino BETA)\
**Tags:** windows\
**Created:** [February 3, 2026, 4:09pm UTC](https://discourse.mcneel.com/t/push-pull-command/215435 "2026-02-03T16:09:27Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![maarten1](https://avatars.discourse-cdn.com/v4/letter/m/6f9a4e/32.png) [@maarten1](https://discourse.mcneel.com/u/maarten1)\
**Post date:** [February 3, 2026, 4:09pm UTC](https://discourse.mcneel.com/t/push-pull-command/215435/1 "2026-02-03T16:09:28Z")

</div>

Hello,

I am using rhino wip (9) and the push pull command. I see a change in handling. In rhino 8 I could directly select a surface to extrude. In rhino 9 it changed, now I select a surface, it changed into a yello surface, and then I have to hit ‘enter’ again. The two options seem to be switched. Why is that? can it be switchetd back? I think that will give less ‘enters’ and saves time in drawing.

Please let me know.

Kind regards, Maarten WIjnen

---

<div class="post-metadata">

**Author:** ![theoutside](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/theoutside/32/770924_2.png) [@theoutside](https://discourse.mcneel.com/u/theoutside)\
**Post date:** [February 3, 2026, 5:14pm UTC](https://discourse.mcneel.com/t/push-pull-command/215435/2 "2026-02-03T17:14:03Z")

</div>

@Joshua_Kennedy would be the man to chime in here-

---

<div class="post-metadata">

**Author:** ![jeff\_hammond](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/jeff_hammond/32/768846_2.png) [@jeff\_hammond](https://discourse.mcneel.com/u/jeff_hammond)\
**Post date:** [February 3, 2026, 5:18pm UTC](https://discourse.mcneel.com/t/push-pull-command/215435/3 "2026-02-03T17:18:09Z")

</div>

It’s like that because you can now select multiple surfaces with PushPull. When it’s yellow, you can click another surface and make that one yellow too

Awesome when you want multiple selections. Maybe a bit weird, as you’ve found, when only wanting to PushPull a single

---

<div class="post-metadata">

**Author:** ![Joshua\_Kennedy](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/joshua_kennedy/32/486545_2.png) [@Joshua\_Kennedy](https://discourse.mcneel.com/u/Joshua_Kennedy)\
**Post date:** [February 3, 2026, 7:47pm UTC](https://discourse.mcneel.com/t/push-pull-command/215435/4 "2026-02-03T19:47:33Z")

</div>

Yes, I understand there’s a bit of a hiccup there that wasn’t before. This change was added to support the multiface mode. There’s more info here:

> [@Rhino WIP Feature: PushPull Multiface Support](https://discourse.mcneel.com/t/rhino-wip-feature-pushpull-multiface-support/207756):
>
> Hi all, In the [Rhino 9 WIP](https://www.rhino3d.com/download/rhino/wip/) we’ve made PushPull work across multiple faces of a polysurface. [[PushPull Multiface | New in Rhino WIP] ](https://vimeo.com/1115857846)What is PushPull Multiface? The PushPull command allows you to detect regions on a solid or polysurface and extrude them inward or outward. In Rhino WIP, PushPull can detect regions accross multiple faces as opposed to one single face, like in Rhino 8. Why is this useful? PushPull multiple faces at once solves intersections between faces automagicall…

---

<div class="post-metadata">

**Author:** ![martinsiegrist](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/martinsiegrist/32/772775_2.png) [@martinsiegrist](https://discourse.mcneel.com/u/martinsiegrist)\
**Post date:** [February 4, 2026, 1:53am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/5 "2026-02-04T01:53:32Z")

</div>

If you want to use PushPull just on a single surface, you can make your own button with the following three commands:

```auto
_PushPull
_Pause
Enter

```

Or use the Gumball…

 ![image](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/4/5/5/455732349402d1bf0e6f85712ac3ce789dbe5c39.png)

---

<div class="post-metadata">

**Author:** ![Gijs](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/gijs/32/769882_2.png) [@Gijs](https://discourse.mcneel.com/u/Gijs)\
**Post date:** [February 4, 2026, 8:04am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/6 "2026-02-04T08:04:20Z")

</div>

the macro will be added to RMB  
[RH-89080](https://mcneel.myjetbrains.com/youtrack/issue/RH-89080) PushPull RMB macro

---

<div class="post-metadata">

**Author:** ![maarten1](https://avatars.discourse-cdn.com/v4/letter/m/6f9a4e/32.png) [@maarten1](https://discourse.mcneel.com/u/maarten1)\
**Post date:** [February 4, 2026, 9:04am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/7 "2026-02-04T09:04:07Z")

</div>

Hallo Gijs,

So it will be adjusted? I am not a developer, I do’nt know what a rmb is.🙂

---

<div class="post-metadata">

**Author:** ![wim](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/wim/32/747482_2.png) [@wim](https://discourse.mcneel.com/u/wim)\
**Post date:** [February 4, 2026, 9:06am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/8 "2026-02-04T09:06:23Z")

</div>

Dag Maarten -

> [@maarten1](#):
>
> I do’nt know what a rmb is.

“Right Mouse Button”.  
The `PushPull Pause Enter` macro will be added as a right-click command to the button.  
The `PushPull` command itself will not change.  
-wim

---

<div class="post-metadata">

**Author:** ![maarten1](https://avatars.discourse-cdn.com/v4/letter/m/6f9a4e/32.png) [@maarten1](https://discourse.mcneel.com/u/maarten1)\
**Post date:** [February 4, 2026, 9:27am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/9 "2026-02-04T09:27:41Z")

</div>

And also I use ‘extrude surface’, wich I aliased ‘PP’ - pause - enter.

In rhino wip it discards lines on surfaces, you can not select a devided plane on the surface to extrude. For me the two commands are in the same family, or is that not the case?

---

<div class="post-metadata">

**Author:** ![wim](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/wim/32/747482_2.png) [@wim](https://discourse.mcneel.com/u/wim)\
**Post date:** [February 4, 2026, 9:55am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/10 "2026-02-04T09:55:09Z")

</div>

Dag Maarten -

> [@maarten1](#):
>
> In rhino wip it discards lines on surfaces, you can not select a devided plane on the surface to extrude.

Are you reporting a change in the `ExtrudeSrf` command between Rhino 8 and Rhino WIP?  
In a quick test, extruding a sub-surface of a polysurface works fine in the WIP.  
-wim

---

<div class="post-metadata">

**Author:** ![Gijs](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/gijs/32/769882_2.png) [@Gijs](https://discourse.mcneel.com/u/Gijs)\
**Post date:** [February 4, 2026, 10:19am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/11 "2026-02-04T10:19:01Z")

</div>

> [@maarten1](#):
>
> In rhino wip it discards lines on surfaces, you can not select a devided plane on the surface to extrude.

I think you are referring to the automatic splitting of surfaces in PushPull? That only works in PushPull.

---

<div class="post-metadata">

**Author:** ![maarten1](https://avatars.discourse-cdn.com/v4/letter/m/6f9a4e/32.png) [@maarten1](https://discourse.mcneel.com/u/maarten1)\
**Post date:** [February 4, 2026, 10:47am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/12 "2026-02-04T10:47:56Z")

</div>

Yes, I think I was mistaken, it works ok.

---

<div class="post-metadata">

**Author:** ![brian](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/brian/32/504171_2.png) [@brian](https://discourse.mcneel.com/u/brian)\
**Post date:** [March 11, 2026, 12:23am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/13 "2026-03-11T00:23:53Z")

</div>

[RH-89080](https://mcneel.myjetbrains.com/youtrack/issue/RH-89080) is fixed in Rhino [WIP](https://discourse.mcneel.com/t/welcome-to-serengeti/9612)

---

<div class="post-metadata">

**Author:** ![martinsiegrist](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/martinsiegrist/32/772775_2.png) [@martinsiegrist](https://discourse.mcneel.com/u/martinsiegrist)\
**Post date:** [March 11, 2026, 1:08am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/14 "2026-03-11T01:08:21Z")

</div>

I don’t see a RMB option on the PushPull command in the latest WIP.

---

<div class="post-metadata">

**Author:** ![Gijs](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/gijs/32/769882_2.png) [@Gijs](https://discourse.mcneel.com/u/Gijs)\
**Post date:** [March 11, 2026, 11:42am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/15 "2026-03-11T11:42:21Z")

</div>

You’ll need to run `Reset` and choose **Delete toolbar customizations** for these changes to take effect.

---

<div class="post-metadata">

**Author:** ![martinsiegrist](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/martinsiegrist/32/772775_2.png) [@martinsiegrist](https://discourse.mcneel.com/u/martinsiegrist)\
**Post date:** [March 13, 2026, 12:02am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/16 "2026-03-13T00:02:04Z")

</div>

I tried this but it didn’t help. Ok wait. The option appears in the main left side toolbar. The command in Solid Tools however does not have the right click option.

 ![Screenshot 2026-03-13 010829](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/2/4/e/24e8b6d0111d64b36831b7c10aeaab682c938782.png)

 ![Screenshot 2026-03-13 010856](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/7/9/e/79e9476d8f1806dadde27e2e126fb7cc8efa716e.png)

> **System Info**
>
> Rhino 9 SR0 2026-3-10 (Rhino WIP, 9.0.26069.12305, Git hash:master @ 924f643dfaea3042086f487377615886345e2d62)  
> License type: Commercial, build 2026-03-10  
> License details: Cloud Zoo  
> Expires on: 2026-04-24
> 
> Windows 11 (10.0.26200 SR0.0) or greater (Physical RAM: 128GB)  
> .NET 9.0.14
> 
> Computer platform: DESKTOP
> 
> Standard graphics configuration using DirectX  
> Primary display: NVIDIA RTX A5000 (NVidia) Memory: 24GB, Driver date: 12-19-2025 (M-D-Y). DirectX(11)  
> \> Accelerated graphics device with 4 adapter port(s)  
> - Windows Main Display attached to adapter port #0  
> - Secondary monitor attached to adapter port #1
> 
> Secondary graphics devices.  
> NVIDIA Quadro K2200 (NVidia) Memory: 4GB, Driver date: 12-19-2025 (M-D-Y).  
> \> Accelerated graphics device with 4 adapter port(s)  
> - There are no monitors attached to this device!
> 
> DirectX Settings  
> Safe mode: Off
> 
> OpenBLAS: OpenBLAS 0.3.30 DYNAMIC\_ARCH NO\_AFFINITY Zen MAX\_THREADS=64.
> 
> Rhino plugins that do not ship with Rhino
> 
> Rhino plugins that ship with Rhino  
> C:\Program Files\Rhino 9 WIP\Plug-ins\Commands.rhp “Commands” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\rdk.rhp “Renderer Development Kit”   
> C:\Program Files\Rhino 9 WIP\Plug-ins\UpdatesAndStatistics\UpdatesAndStatistics.rhp “UpdatesAndStatistics” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\RhinoRenderCycles.rhp “Rhino Render” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\rdk\_etoui.rhp “RDK\_EtoUI” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\NamedSnapshots.rhp “Snapshots”   
> C:\Program Files\Rhino 9 WIP\Plug-ins\MeshCommands.rhp “MeshCommands” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\IronPython\RhinoDLR\_Python.rhp “IronPython” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\RhinoCycles.rhp “RhinoCycles” 9.0.26069.12305  
> C:\Program Files\Rhino 9 WIP\Plug-ins\3dxrhino.rhp “3Dconnexion 3D Mouse”   
> C:\Program Files\Rhino 9 WIP\Plug-ins\Displacement.rhp “Displacement”   
> C:\Program Files\Rhino 9 WIP\Plug-ins\SectionTools.rhp “SectionTools”

---

<div class="post-metadata">

**Author:** ![Gijs](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/gijs/32/769882_2.png) [@Gijs](https://discourse.mcneel.com/u/Gijs)\
**Post date:** [March 13, 2026, 8:48am UTC](https://discourse.mcneel.com/t/push-pull-command/215435/17 "2026-03-13T08:48:52Z")

</div>

thanks for reporting, I’ll reopen the issue.
