# Loft between planar, directional aligned curves is not planar

**URL:** <https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319>\
**Category:** Grasshopper\
**Created:** [November 18, 2019, 7:35pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319 "2019-11-18T19:35:22Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![STUDENT\_F](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/student_f/32/147789_2.png) [@STUDENT\_F](https://discourse.mcneel.com/u/STUDENT_F)\
**Post date:** [November 18, 2019, 7:35pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/1 "2019-11-18T19:35:22Z")

</div>

Hi, I am trying to generate several lofts between planar, directional aligned curves. Unfortunately, my resulting breps are not planar, but I do not know why.

Thanks for your help!

[191118-Forum.gh](https://discourse.mcneel.com/uploads/short-url/piJQsNPvEr3ugAtFugd1hKhAI6x.gh) (9.6 KB)

 ![191118-FOrum](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/d/a/daad99917f90988b60164fbbc9a2456d7654c904.jpeg)

---

<div class="post-metadata">

**Author:** ![Joseph\_Oster](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/joseph_oster/32/549124_2.png) [@Joseph\_Oster](https://discourse.mcneel.com/u/Joseph_Oster)\
**Post date:** [November 18, 2019, 8:23pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/2 "2019-11-18T20:23:01Z")

</div>

Your curves are so obviously not planar. 🤦‍♂️

 ![not_planar](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/d/6/d6e4a85ecec9a65231f981c3649aa45857da0c20.png)

![not_planar2](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/1/6/168dfb9f5fdb323589c233ddd6535c70f4da2161.png)

---

<div class="post-metadata">

**Author:** ![STUDENT\_F](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/student_f/32/147789_2.png) [@STUDENT\_F](https://discourse.mcneel.com/u/STUDENT_F)\
**Post date:** [November 18, 2019, 8:25pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/3 "2019-11-18T20:25:41Z")

</div>

![RE1](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/5/6/56b842fdc84c68d9b597bcbd1f8acc0da910e338.jpeg)

this is strange… Why is my test for planarity different to yours?

I do not know what I am doing wrong 🙈 How can I get planar surfaces between the curves?

---

<div class="post-metadata">

**Author:** ![STUDENT\_F](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/student_f/32/147789_2.png) [@STUDENT\_F](https://discourse.mcneel.com/u/STUDENT_F)\
**Post date:** [November 18, 2019, 8:40pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/4 "2019-11-18T20:40:41Z")

</div>

The original curves are planar, when I test them with the “planar” component.

Moreover I do not know what you want to show me in your seconde picture. Of curse the polyline can not be planar, but the individual segments can be planar. I am very sorry when there is a missunderstanding and I would be very thankful if you can explain what you mean.

---

<div class="post-metadata">

**Author:** ![Joseph\_Oster](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/joseph_oster/32/549124_2.png) [@Joseph\_Oster](https://discourse.mcneel.com/u/Joseph_Oster)\
**Post date:** [November 18, 2019, 8:51pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/5 "2019-11-18T20:51:51Z")

</div>

A single line defined by two end points is “planar” but two lines are not necessarily co-planar, which is required for lofting a planar surface. Your surface segments are extremely close to planar. I tested them by means I’d rather not go into right now, but I’d call it done, close enough, and move on.

---

<div class="post-metadata">

**Author:** ![STUDENT\_F](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/student_f/32/147789_2.png) [@STUDENT\_F](https://discourse.mcneel.com/u/STUDENT_F)\
**Post date:** [November 18, 2019, 8:58pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/6 "2019-11-18T20:58:36Z")

</div>

When I understand correctly, you recommend to move on with the actual result.

The problem when I continue with the resulting surfaces is, that some are not planar. You can see this when you look at the loft output. I need them all planar for my later actions (not just mathematical, also grasshopper type “planar surface”)

---

<div class="post-metadata">

**Author:** ![Jakinta](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/jakinta/32/485854_2.png) [@Jakinta](https://discourse.mcneel.com/u/Jakinta)\
**Post date:** [November 18, 2019, 9:12pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/7 "2019-11-18T21:12:16Z")

</div>

As @Joseph_Oster wrote your curves are planar, but they dont belong to same plane, so they are not coplanar…

So you can project bending surfaces to aproximized plane.

 ![02](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/c/1/c12ebe39da4bf2427502177a0977e2f28b439ac3.png)

Then move it to correct position so you get continuos brep.

 ![03](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/a/0/a02455970350d01bc571f34e656586d4802e7100.png)

This is a workaround. Or you can go back in process where you got those curves and see if it is possible to get them as coplanar.

[191118-Forum\_RE.gh](https://discourse.mcneel.com/uploads/short-url/nhRgaANvDtHepFhHKeCvUgehwM7.gh) (16.1 KB)

---

<div class="post-metadata">

**Author:** ![STUDENT\_F](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/student_f/32/147789_2.png) [@STUDENT\_F](https://discourse.mcneel.com/u/STUDENT_F)\
**Post date:** [November 18, 2019, 9:20pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/8 "2019-11-18T21:20:35Z")

</div>

Hello Jakinta,

let us go the “clean” way.  
The curves are developed by the latest solution you produced at this threat:

> [@How to offset this 3D curve with fixed start end points on axis?](https://discourse.mcneel.com/t/how-to-offset-this-3d-curve-with-fixed-start-end-points-on-axis/91346/22):
>
> In this manner you can offset your 3d curve in desired directions per vertices while keeping it circular in top view…hope this helps… [offset curve\_RE\_V5.gh](https://discourse.mcneel.com/uploads/short-url/mUFJ8xl2GDF5FYLT99MCCDAShmU.gh) (24.1 KB)

The curves you are starting with are co planar, so I think the inaccuracy is generated by your latest solution. Do you know a solution for this way?

---

<div class="post-metadata">

**Author:** ![Jakinta](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/jakinta/32/485854_2.png) [@Jakinta](https://discourse.mcneel.com/u/Jakinta)\
**Post date:** [November 18, 2019, 9:22pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/9 "2019-11-18T21:22:57Z")

</div>

Unfortunately no, i do not know. I dont think it is even possible.  
But maybe somebody more proficient than me on this forum might find better solution.

…And surfaces created by above mentioned solution V5 are actually planar…just checked them…

 ![image](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/f/1/f16f5da7b992d8e88eeb6f30169abfe148156203.png)

---

<div class="post-metadata">

**Author:** ![Joseph\_Oster](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/joseph_oster/32/549124_2.png) [@Joseph\_Oster](https://discourse.mcneel.com/u/Joseph_Oster)\
**Post date:** [November 18, 2019, 9:34pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/10 "2019-11-18T21:34:59Z")

</div>

The problem happened when the curves were created, outside of this model. Each curve has three to four control points and somehow. the pairs of curves (control points) are not co-planar.

Corrected below in white group but frankly, this and everything about this model, is a bit ridiculous:

- Separating them into two sets instead of creating them as matching branches in a data tree.
- Flipping curve directions instead of creating them consistently in the first place.
- And now this white group to Pull the flawed curves to planar surfaces.

I’m surprised that Brep Join on the resulting surfaces still works, but it does.

 ![191118-Forum_2018Jan23a](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/4/a/4a33d772dc3bd766d49979c17686e50ef85ab957.png)  
**191118-Forum\_2019Nov18a.gh** (15.2 KB) _( **DEPRECATED** , see below)_

**P.S.** I would call this a coping response rather than a solution. But if it must be done this way, after the fact, it can be done better using Project (to plane) instead of PlaneSrf _(with arbitrary dimensions)_ and Pull. _(disabled purple group)_

 ![191118-Forum_2019Nov18b](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/2/1/214990c757838efa0b14a7e4cb9b0bf37169f923.png)  
[191118-Forum\_2019Nov18b.gh](https://discourse.mcneel.com/uploads/short-url/631It9Z1rUHUVr6PztfNeeY6cbI.gh) (15.0 KB)

---

<div class="post-metadata">

**Author:** ![STUDENT\_F](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/student_f/32/147789_2.png) [@STUDENT\_F](https://discourse.mcneel.com/u/STUDENT_F)\
**Post date:** [November 18, 2019, 9:39pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/11 "2019-11-18T21:39:18Z")

</div>

Let me check that again… 😭

---

<div class="post-metadata">

**Author:** ![Joseph\_Oster](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/joseph_oster/32/549124_2.png) [@Joseph\_Oster](https://discourse.mcneel.com/u/Joseph_Oster)\
**Post date:** [November 19, 2019, 5:49pm UTC](https://discourse.mcneel.com/t/loft-between-planar-directional-aligned-curves-is-not-planar/92319/12 "2019-11-19T17:49:19Z")

</div>

FYI, this thread continues elsewhere:

> [@Strange: Extrusion from planar curve is not planar!](https://discourse.mcneel.com/t/strange-extrusion-from-planar-curve-is-not-planar/92390/11):
>
> The distances from the end points to a “common plane” (Plane Fit) are so small that they appear as zero in a text panel, unless the values are formatted. Some of the distances from curve control points to that “common plane” are larger. [191118-Forum\_2019Nov19a.gh](https://discourse.mcneel.com/uploads/short-url/6GGzYzHszQIfZ9Y19CvGxAs4wAL.gh) (22.9 KB)

 ![191118-Forum_2019Nov19a](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/8/2/820b92d0bddc3418a65750e6e518af2c6d7a225f.png)  
[191118-Forum\_2019Nov19a.gh](https://discourse.mcneel.com/uploads/short-url/6GGzYzHszQIfZ9Y19CvGxAs4wAL.gh) (22.9 KB)
