# Isolate causes Filter dialog to open

**URL:** <https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256>\
**Category:** Serengeti (Rhino BETA)\
**Created:** [August 17, 2020, 10:18pm UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256 "2020-08-17T22:18:11Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![3dsynergy](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/3dsynergy/32/770156_2.png) [@3dsynergy](https://discourse.mcneel.com/u/3dsynergy)\
**Post date:** [August 17, 2020, 10:18pm UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/1 "2020-08-17T22:18:11Z")

</div>

Hi,  
Found a small bug in isolate and the filter box.  
Open a new file draw a sphere and a circle  
Open the filter dialog box  
Close the filter dialog box  
Select an object and use the isolate command  
Notice that the filter opens up even though it was closed  
Now it will open every time in a session unless you have disable checked in the filter dialog box,

I like to leave my filter choices checked then close the dialog and not disable it. that way I can open it again and my choices are still checked. While closing the filter essentially disables it but leaves your choices I like that. Also it should not open on it’s own unless you use the sub-d commands.  
RM

---

<div class="post-metadata">

**Author:** ![John\_Brock](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/john_brock/32/476283_2.png) [@John\_Brock](https://discourse.mcneel.com/u/John_Brock)\
**Post date:** [August 17, 2020, 11:14pm UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/2 "2020-08-17T23:14:21Z")

</div>

Assuming you meant the SelectionFilter,  
I can not repeat that.  
In About, please copy/paste your version details.

I just tested it in:  
(7.0.20225.23115, 8/12/2020)

Okay, I can repeat it now, but something in the SelectionFilter list must be unchecked. If nothing is filtered out, it does not reappear after closing.  
Mine was floating, not docked.

[https://mcneel.myjetbrains.com/youtrack/issue/RH-59977](https://mcneel.myjetbrains.com/youtrack/issue/RH-59977)

---

<div class="post-metadata">

**Author:** ![3dsynergy](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/3dsynergy/32/770156_2.png) [@3dsynergy](https://discourse.mcneel.com/u/3dsynergy)\
**Post date:** [August 18, 2020, 12:42am UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/3 "2020-08-18T00:42:59Z")

</div>

> [@John\_Brock](#):
>
> Okay, I can repeat it now, but something in the SelectionFilter list must be unchecked. If nothing is filtered out, it does not reappear after closing.  
> Mine was floating, not docked.

Yep that too, thanks for digging in deeper and for logging.  
RM

---

<div class="post-metadata">

**Author:** ![brian](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/brian/32/504171_2.png) [@brian](https://discourse.mcneel.com/u/brian)\
**Post date:** [August 19, 2020, 12:57am UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/4 "2020-08-19T00:57:15Z")

</div>

[RH-59977](https://mcneel.myjetbrains.com/youtrack/issue/RH-59977) is fixed in the latest [WIP](https://discourse.mcneel.com/t/welcome-to-serengeti/9612)

---

<div class="post-metadata">

**Author:** ![Swayze](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/swayze/32/484526_2.png) [@Swayze](https://discourse.mcneel.com/u/Swayze)\
**Post date:** [April 18, 2022, 6:13pm UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/5 "2022-04-18T18:13:15Z")

</div>

This seems to be an issue still. After the latest update I am seeing the selection filter pop up when running Isolate, Insert Edge, Slide Edge…possibly a few more. I’m using the floating selection filter dialogue box, and the behavior only happens after I’ve manually selected a selection filter option from the Sub-D menu bar, after which the pop up is persistent. Also, when the dialogue pops up there are no boxes ticked, but the sub-objects box in the lower right is greyed out.

---

<div class="post-metadata">

**Author:** ![wim](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/wim/32/747482_2.png) [@wim](https://discourse.mcneel.com/u/wim)\
**Post date:** [April 18, 2022, 7:08pm UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/6 "2022-04-18T19:08:23Z")

</div>

Hi -

> [@Swayze](#):
>
> After the latest update I am seeing the selection filter pop up when running Isolate, Insert Edge, Slide Edge…possibly a few more.

That issue with `Isolate` was also reported here:

> [@Isolate Command issue in Rhino 7](https://discourse.mcneel.com/t/isolate-command-issue-in-rhino-7/140942/15):
>
> Got it - thank you. [RH-68303](https://mcneel.myjetbrains.com/youtrack/issue/RH-68303) Isolate: opens the selection filter -Pascal

I’ve added a note to [RH-68303](https://mcneel.myjetbrains.com/youtrack/issue/).  
Thanks,  
-wim

---

<div class="post-metadata">

**Author:** ![brian](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/brian/32/504171_2.png) [@brian](https://discourse.mcneel.com/u/brian)\
**Post date:** [May 11, 2022, 12:55am UTC](https://discourse.mcneel.com/t/isolate-causes-filter-dialog-to-open/107256/7 "2022-05-11T00:55:28Z")

</div>

[RH-68303](https://mcneel.myjetbrains.com/youtrack/issue/RH-68303) is fixed in [Rhino 7 Service Release 19](https://www.rhino3d.com/download/rhino/7/latest)