Hi, In the attached example, I’d like to cut one curve at several lengths which I define in the ‘Panel’ parameter. In this example, the first cut is at 3000, the 2nd at 2000, the 3rd at 1000 etc. As the amount of cuts can be up to 30, it doesn’t make sense to repeat the process 30 times by copying…

you want to repeat the whole cutting pattern, or just keep on cutting at 3000? if you want to repeat the whole patterm, then maybe something like this would work [image] SplittingOfCurve_Re.gh (25.1 KB)

I hope I understood your question correctly, It can be done with the help of Anemone Plugin [Capture] SplittingOfCurve_wt.Anemone.gh (19.1 KB)

No need for a loop, this might be the same as what @inno did? Curve is internalized, no need for Rhino file. [SplittingOfCurve_2022Oct19a] SplittingOfCurve_2022Oct19a.gh (26.0 KB)

Thank you very much for the tip Dharman. You reminded me of Anemone. I used it years ago and I was forgotten the name. With Naguko’s Anemone solution I have it working very well. Cheers, Gerard

Thank you very much for the tip Toto. Just like Dharman, you reminded me of Anemone. I used it years ago and I was forgotten the name. With Naguko’s Anemone solution, it works fluently. Cheers, Gerard

Thank you Inno, This would be perfect for a simple repeating pattern. However, I need an increment of the values in a row in the panel. That makes it only possible with something like Anemone. With Naguko’s Anemone solution, it works fluently. Cheers, Gerard

Thank you very much for your solution Naguko, It works perfectly! I used Anemone years ago and was forgotten the name. Also I remember that setting up Anemone the first time to make it work is not easy. Therefore your solution is much appreciated as I now understand again the dynamics of Anemone. …

Thank you Joseph, As I mentioned to Inno, this would be perfect for a simple repeating pattern. However, I need an increment of the values in a row in the panel. That makes it only possible with something like Anemone. With Naguko’s Anemone solution, it works fluently. Cheers, Gerard

[image] Gerard: As I mentioned to Inno, this would be perfect for a simple repeating pattern. However, I need an increment of the values in a row in the panel. So you didn’t describe the problem correctly? That always leads to wasted time and failure.

How can I create a feedback loop?

Grasshopper

dharman October 19, 2022, 8:51am 2

Have a look at the anemone add-in. It’s not possible with out of the box components. I believe hoopsnake also has a mechanism for this. Otherwise write it in a python, c# or VBA node

Topic		Replies	Views
Grasshopper tutorial in 7 minutes - EX 21 - Divide curve + Repeat data Grasshopper windows , grasshopper2 , grasshopperrhino	0	101	June 20, 2024
How to repeat a sequence of comands in grasshoper Grasshopper	3	1638	December 1, 2019
Grasshopper pattern - using loops, multiple problems to solve Grasshopper windows , pattern , anemone , grasshopperrhino	3	935	November 1, 2023
Divide curve based on scale factor Grasshopper	9	928	October 30, 2019
How do I trim an open curve with given points? Grasshopper windows	8	1862	July 5, 2021

How can I create a feedback loop?

Related topics