Thanks mitch I will try
here is another holo on the older pc…what is wrong with the new one…
No change with all plugs disabled
but my memory stays flat at 2G
on the other computer the memory goes up to 4.6G…
Hi Micha, but wasn’t it the 970 from vad, that impressed you so much?
I mean, 400 units at GPU_16 and 73 frames at GPU_4…
That’s at the GPU_16 double fast then my 7950…
So why the 780?..
Sorry, wasn’t reading every posting since I was last here…
steff
Whoops… Other than that, have you checked your AA settings in options view openGL?
Makes a huge difference. I still don’t know, what settings is agreed upon doing holo2, but I do it AA at 2x, and none none.
If it’s cranked up there too much, framerates drop dramatically. See VAD’s posting earlier in the thread.
What I do not understand with this card, is the dramatical drop in units of GPU_16 between none AA and the higher settings. That does make a difference with the 7950 of about 30%, with the 970, it’s 900%…
At post 433 and 452 there are very good results of the GTX 770/780 too. For me the advantages of the GTX 780 are:
- 6GB memory good for GPU rendering and future 4K display usage
- can be overclocked at the nearly the same power like the 980
- low power consumption, strix model allow passive usage during idle usage
So finally I decided me for the GTX780. It’s a pity that I don’t reach the 50 fps for GPU4. So it stay to hope Rhino 6 will open the door for full GPU power.
Thankx Steff But No change still 13445
I really think its a memory probleme seems that it blocks at 2G and doesnt move…
I will change the memory stick of place on my Mother Board z97-A…
Here is my desktop score at home, I’ll add my laptop and work computer later on as well. Cool benchmarking tool.
Below is my laptop score.
I have checked all settings and the computer is a bombe All is perfectly running
ssd cpu gpu memory
my score on the maxwell benchmark is the highest of the 8 cores 6.6 GB memory
So could it be the installation of Rhino?
I am uninstalling and reinstalling Rhino
Will let you know
fresh install is worse then my oldest laptop…
any help on this?
Hi Jennifer,
Are you actually experiencing slowdowns in real operation (not Holomark)?
For example just spinning a heavy model around on the screen (your impression of speed/fluidity as compared to the other computers you have)
Or doing some complex boolean operation - does it perform more slowly than the others?
–Mitch
yes yes everything is slow on this new machine
grasshopper can take ages just to calculate a volume
booleens even simple ones take longer than the old computers
I am lost…
Merde, alors…
Hi Jennifer,
you could reinstall the Nvidia driver, best use the Nivida driver uninstall tool before:
Select the option “new installation” (or called like this, I have a german UI only)
Would a video driver affect boolean operation speed? --Mitch
Micha, thanks that was my last resort I will try that maybe next week because I am going away for work… but all the tests I did on the gtx were fine… I will do that but the cpu seems slow as well but only in rhino…
after new driver on CG Nvidia Thanks Micha
But still under performing
Any other suggestions?
If I compare the result with my GTX780 results I would say the CPU could the problem. For example my wireframe test is faster, but my shaded test is slower.
You could update the chipset driver. Maybe both -GPU and CPU driver - needs to be at the same “time” level.
I updated my chip set driver and now the calculating of the technical display is 10 times slower. I don’t see why it is so slow now. Other CPU and GPU values are like before, no change, so why the calculating of the technical display?
Before:
Holomark 2 v2,2,03
Total Score: 31666
Total Runtime: 139.53 sec
GPU scores: 19560
GPU_01 - 851.10 fps - Cube 4 tests
GPU_02 - 34.10 fps - UDT Shape
GPU_03 - 81.30 fps - Wireframe
GPU_04 - 40.30 fps - Shaded
GPU_05 - 29.70 fps - Rendered
GPU_06 - 29.20 fps - Block Rendered
GPU_07 - 17 units Nurbs @ 5 fps in Wireframe
GPU_08 - 9 units Nurbs @ 5 fps in Shaded
GPU_09 - 10 units Nurbs @ 5 fps in RenderSpeed
GPU_10 - 92.60 fps - RenderMesh Render
GPU_11 - 69.00 fps - RenderMesh RenderSpeed
GPU_12 - 128.20 fps - JoinedMesh Render
GPU_13 - 54.60 fps - JoinedMesh RenderSpeed
GPU_14 - 2 units mesh @ 15 fps in Shaded
GPU_15 - 6 units mesh @ 15 fps in Render
GPU_16 - 4 units mesh @ 15 fps in RenderSpeed
GPU_17 - 80.00 fps - mesh in Rendered Studio
GPU_18 - 9.30 fps - Nurbs in Rendered Studio
GPU_19 - 20.50 fps - Block Illustration
GPU_20 - 47.20 fps - 2D single
GPU_21 - 5.70 fps - 2D massive (20x)
CPU scores: 12106
CPU_01 - 10.83 sec - Booleans and Contours
CPU_02 - 1.67 sec - Twist and Taper (UDT)
CPU_03 - 4.74 sec - Meshing Mini
CPU_04 - 0.02 sec - Extract Render Mesh
CPU_05 - 0.09 sec - Join Render Mesh
CPU_06 - 17.44 sec - Reduce Mesh
CPU_07 - 3.03 sec - Calculating Technical display
CPU_08 - 3.48 sec - Making Silhouettes
ASUSTeK COMPUTER INC.
Z9PE-D8 WS
NVIDIA GeForce GTX 780 - 4095.0 MB
DriverVersion: 9.18.13.4725
After:
Holomark 2 v2,2,03
Total Score: 27420
Total Runtime: 184.8 sec
GPU scores: 21480
GPU_01 - 1025.60 fps - Cube 4 tests
GPU_02 - 34.20 fps - UDT Shape
GPU_03 - 80.00 fps - Wireframe
GPU_04 - 41.20 fps - Shaded
GPU_05 - 30.50 fps - Rendered
GPU_06 - 29.70 fps - Block Rendered
GPU_07 - 17 units Nurbs @ 5 fps in Wireframe
GPU_08 - 9 units Nurbs @ 5 fps in Shaded
GPU_09 - 10 units Nurbs @ 5 fps in RenderSpeed
GPU_10 - 92.60 fps - RenderMesh Render
GPU_11 - 69.40 fps - RenderMesh RenderSpeed
GPU_12 - 133.30 fps - JoinedMesh Render
GPU_13 - 55.20 fps - JoinedMesh RenderSpeed
GPU_14 - 2 units mesh @ 15 fps in Shaded
GPU_15 - 6 units mesh @ 15 fps in Render
GPU_16 - 4 units mesh @ 15 fps in RenderSpeed
GPU_17 - 85.50 fps - mesh in Rendered Studio
GPU_18 - 9.00 fps - Nurbs in Rendered Studio
GPU_19 - 20.70 fps - Block Illustration
GPU_20 - 51.30 fps - 2D single
GPU_21 - 5.90 fps - 2D massive (20x)
CPU scores: 5940
CPU_01 - 10.59 sec - Booleans and Contours
CPU_02 - 1.83 sec - Twist and Taper (UDT)
CPU_03 - 4.65 sec - Meshing Mini
CPU_04 - 0.02 sec - Extract Render Mesh
CPU_05 - 0.08 sec - Join Render Mesh
CPU_06 - 17.11 sec - Reduce Mesh
CPU_07 - 46.38 sec - Calculating Technical display
CPU_08 - 3.51 sec - Making Silhouettes
ASUSTeK COMPUTER INC.
Z9PE-D8 WS
NVIDIA GeForce GTX 780 - 4095.0 MB
DriverVersion: 9.18.13.4725
Hmm, I don’t understand much here… My latest score with my home machine is 71395… I tested previously with the same setup and it was 45844… (post 252). What’s going on there? Only difference, SR11 RC (latest) instead of SR10.
Is it possible there is that much difference or is the test unreliable? --Mitch
OK, that wasn’t the latest SR11, it was the previous one. Loaded the latest and now it’s back down to 42869… So what changed? Again, how reliable is the test really?
Yeah, something is really wrong here:
GPU 13 1666.7 --> 54.30
GPU 16 180 units --> 4 units
Don’t believe that loading the new RC could change that much.