# Help Please run the C# tool Display Conduit

**URL:** <https://discourse.mcneel.com/t/help-please-run-the-c-tool-display-conduit/134041>\
**Category:** Grasshopper Developer\
**Tags:** windows\
**Created:** [November 26, 2021, 8:09pm UTC](https://discourse.mcneel.com/t/help-please-run-the-c-tool-display-conduit/134041 "2021-11-26T20:09:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![taraskydon](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/taraskydon/32/764889_2.png) [@taraskydon](https://discourse.mcneel.com/u/taraskydon)\
**Post date:** [November 26, 2021, 8:09pm UTC](https://discourse.mcneel.com/t/help-please-run-the-c-tool-display-conduit/134041/1 "2021-11-26T20:09:32Z")

</div>

[Veiw3DmodelInfo.cs](https://discourse.mcneel.com/uploads/short-url/72qQYWlDEX5FMNEbmwSkAYocEEP.cs) (5.1 KB)

 ![Скриншот 2021-11-26 21.57.36](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/2/f/4/2f43e4a5538d4eb3198f689ef28ef48bdfe77580.png)

## I want the mapping to work via Rhino.Display.DisplayConduit so that after closing the grayshopper the model Mesh is baked on the screen (Viewport).

I also found a method through python. but I can’t pull the model into the upper right corner of the display (Viewport).  
[fc2.gh](https://discourse.mcneel.com/uploads/short-url/idp7m85wMeodDXIg3VZkLTpBEgq.gh) (7.3 KB)

---

<div class="post-metadata">

**Author:** ![taraskydon](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/taraskydon/32/764889_2.png) [@taraskydon](https://discourse.mcneel.com/u/taraskydon)\
**Post date:** [December 3, 2021, 9:12pm UTC](https://discourse.mcneel.com/t/help-please-run-the-c-tool-display-conduit/134041/2 "2021-12-03T21:12:58Z")

</div>

[https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/e/5/4/e54b2beab12972fcbb13e347ae8433683d1dd64d.mp4](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/e/5/4/e54b2beab12972fcbb13e347ae8433683d1dd64d.mp4)

---

<div class="post-metadata">

**Author:** ![taraskydon](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/taraskydon/32/764889_2.png) [@taraskydon](https://discourse.mcneel.com/u/taraskydon)\
**Post date:** [December 3, 2021, 9:13pm UTC](https://discourse.mcneel.com/t/help-please-run-the-c-tool-display-conduit/134041/3 "2021-12-03T21:13:56Z")

</div>

[https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/0/b/3/0b31ec35c7c65f33d6f9652e1317ccc63e94f76e.mp4](https://global.discourse-cdn.com/mcneel/uploads/default/original/4X/0/b/3/0b31ec35c7c65f33d6f9652e1317ccc63e94f76e.mp4)
  
i was able to do. 🕶