# Hatch Pattern Print Width

**URL:** <https://discourse.mcneel.com/t/hatch-pattern-print-width/41720>\
**Category:** Serengeti (Rhino BETA)\
**Created:** [February 27, 2017, 7:13pm UTC](https://discourse.mcneel.com/t/hatch-pattern-print-width/41720 "2017-02-27T19:13:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![djnelson75](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/djnelson75/32/683971_2.png) [@djnelson75](https://discourse.mcneel.com/u/djnelson75)\
**Post date:** [February 27, 2017, 7:13pm UTC](https://discourse.mcneel.com/t/hatch-pattern-print-width/41720/1 "2017-02-27T19:13:04Z")

</div>

Hatch patterns in V6 aren’t obeying layer print widths.

[Hatch Test.pdf](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/3/c/3cf7ec0cd3fda1ff3a13323ec3e5fd170b585f6a.pdf) (1.1 KB)

[Hatch Test.3dm](https://global.discourse-cdn.com/mcneel/uploads/default/original/3X/e/9/e9bac9c142064d0d40d80bbb4f8cc1cb3894c82a.3dm) (29.0 KB)

---

<div class="post-metadata">

**Author:** ![pascal](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/pascal/32/479395_2.png) [@pascal](https://discourse.mcneel.com/u/pascal)\
**Post date:** [February 27, 2017, 7:58pm UTC](https://discourse.mcneel.com/t/hatch-pattern-print-width/41720/2 "2017-02-27T19:58:02Z")

</div>

Hi Dennis - thanks, I see that.

[https://mcneel.myjetbrains.com/youtrack/issue/RH-38130](https://mcneel.myjetbrains.com/youtrack/issue/RH-38130)

-Pascal

---

<div class="post-metadata">

**Author:** ![brian](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/brian/32/504171_2.png) [@brian](https://discourse.mcneel.com/u/brian)\
**Post date:** [March 8, 2017, 1:26am UTC](https://discourse.mcneel.com/t/hatch-pattern-print-width/41720/3 "2017-03-08T01:26:53Z")

</div>

[RH-38130](https://mcneel.myjetbrains.com/youtrack/issue/RH-38130) is fixed in the latest WIP