# Extract BumpMap mesh

**URL:** <https://discourse.mcneel.com/t/extract-bumpmap-mesh/46284>\
**Category:** Rhino for Mac\
**Created:** [August 2, 2017, 8:20pm UTC](https://discourse.mcneel.com/t/extract-bumpmap-mesh/46284 "2017-08-02T20:20:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![okeating](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/okeating/32/683235_2.png) [@okeating](https://discourse.mcneel.com/u/okeating)\
**Post date:** [August 2, 2017, 8:20pm UTC](https://discourse.mcneel.com/t/extract-bumpmap-mesh/46284/1 "2017-08-02T20:20:01Z")

</div>

I’ve got a surface with a bumpmap applied to it and I’d like to extract the mesh for 3D printing. I was hoping that extracting the rendermesh would do it but no dice. Rhino for mac doesn’t seem to have displacement mapping.

---

<div class="post-metadata">

**Author:** ![pascal](https://sea3.discourse-cdn.com/mcneel/user_avatar/discourse.mcneel.com/pascal/32/479395_2.png) [@pascal](https://discourse.mcneel.com/u/pascal)\
**Post date:** [August 2, 2017, 8:22pm UTC](https://discourse.mcneel.com/t/extract-bumpmap-mesh/46284/2 "2017-08-02T20:22:21Z")

</div>

Hi okeating - bump mapping does not actually change the 3d mesh it just does some trickery with the mesh normals to make it look bumpy if you don’t look too closely - what you are after is displacement mapping and I think that is not yet in Rhino for mac - I’ll check.

-Pascal
