CNC output

Re: [McNeel Forum] [Rhino for Windows] CNC output
I don’t have a tool changer so I can’t answer that question with authority. It’s comprehensive software with a long list of post processors including FANUC. You can create a tool library including setting feed speeds etc. My suggestion: either call Mecsoft @ (949) 654-8163 & ask for Uday in tech support. You are able to download & install the software for free evaluation at https://mecsoft.com. It’s good stuff.

RhinoCAM? Sure. You just need to set up the postprocessor with a toolchange block. Works fine.

–Mitch

Cool…

Robert,
I have a 4 1/2 axis machine from Legacy Wood Working. They are a small company out of Utah, Sandy Utah I believe. I have an 18 tool changer on it, as well as their lathe. I run it with Rhino and RhinoCam. Support from Legacy is pretty weak, but I don’t really want to throw them under the bus because their machine is awesome. And on the few things that I have really needed from them Legacy did come through. Support from Rhino and RhinoCam of course is awesome. We use Mach3 for the controller and it has been flawless. Hope this helps.
Bill
www.beyondwoodusa.com

It does. Thank you….

Everyone on this board has been extremely helpful. I think ill hang around more….

Bob

Robert Blackhurst

President

Stagegear Inc.

714-632-7170

With Fusion 360 breathing down everyone’s necks, I hope that Rhino3D responds be adding some kind of rudimentary CNC solution. CNC is no longer a vertical thing that people enjoy spending a lot of money for.

3 Likes

$300 is reasonable. You would have a heart attack if you knew what the cost of annual maintenance is on other products.

1 Like

Hello Abrahamwechter:

My question is related:
it is possible to go from Rhino to 3D printing?
I am asking this because I find difficult to fix bad meshes.
If is not possible, what mesh fix software do you recommend?
thank you very much for your answer.

Hello - of course, but yes, you need to export good meshes - what problems are you finding?

-Pascal

1 Like

in big solids I have to split the meshes to produce in 3D printing.
but I cannot split bad meshes, they have to be fix first or go back to surface and re build them
But I think there is software that do mesh repair

Helvetosaur:
do you know a software that fix bad meshes for 3D printing?


This model consist in 3 parts only, but was 3D printed in 4 parts
There were two bad meshes that had to be fix

Well, if the bad meshes are coming from Rhino, 95% of the time it’s your Rhino surface model that is bad which causes the bad meshing. so the first step is to see why your Rhino model is bad (naked edges, bad joins, non-manifold surfaces etc.).

Otherwise for mesh-fixing software, there are many out there, I thinnk the standard for consumer level issues is meshmixer - Netfabb used to also have a free version but not since bought by Autodesk…

Otherwise there is stiil the open source and quite powerful MeshLab
http://www.meshlab.net/

1 Like

Thank you!

RhinoCAM-MESH is a MecSoft product completely integrated in Rhino for
mesh repair. Feel free to visit our website for product information and to download the demo:
https://mecsoft.com/rhinomesh/
or contact us directly for help evaluating your file: sales@mecsoft.com

If you are running Windows 10, have a look at 3D builder, a basic but capable 3D file repair app that comes with windows 10.
It can repair and split 3D files.
I use it quite often, and don’t Boolean my 3D files for 3D printing in Rhino any more, straight to 3D builder.

I agree with you about Multicam. When they set my machine up, the installer set the “lift” to zero. I had never used a cnc router and every time I tried to cut a part, it would drag across the part. thought I was doing something wrong…I would try to plane the materials, again and again for about a year before I finally discovered the “lift” dialog inside the softwear. A year wasted. Now with the Covid, and people are supposed to be working from home…yeah well…wait 2 hours for a return call and then have to call back because no one calls me. I am looking at Rhino and really happy with what I am seeing. I am trying to figure out if Rhino with create the correct files…seems the Milling section produces nc files and Coreo uses cnc files. I stopped buy parts from multicam because no one was responsive. I found the receptionist old and cold as well as everyone at the place except the shop workers who were always helpful. The company culture starts at the top so…

Just wanted to say that I use RhinoCAM since 1+ years and I’m super happy with it. Their support is super responsive + they really help with excellent explanations.

There are really good videos to show you how it works too - although some parts are still a learn by doing testing the myriad of options available.

Pro side:

  • Pricey but features abound. Some features like remachining bump the price up a lot compared to similar software but there’s workarounds.
  • Best finish results I’ve seen
  • Optimized to the gills + options!
  • Super Customizable post processor GUI editor
  • Collision detection including fixtures
  • super fast software and all integrated into Rhino

On the con side:

  • GUI is a still a bit antique, antiquated, misleading or manual.
  • High-complexity factor (but well documented - compared to other CAMs)
  • Can crash Rhino
  • Cant do Laser - but can be tricked into doing so
  • Forum is poor and locked away
  • Updates are manual
  • not for the feeble minded
  • No GH support
    Im not a machinist or CAD expert (but been studying the job and tech since 5 years + 3 applied experience).

Price out PowerMill, WorkNC, HyperMill etc. MecSoft’s products are a bargain.
In the list of Pro’s you should add that you can automate the programming with Python and their SDK. Of everything I’ve automated so far nothing takes more than 1 minute from opening the Rhino file to posting the NC file.