Hey. I’ve got some strange problem with capping the polysurface after Sweep1. I’ve got curve and rail as on picture below. The location of starting point is not accidental. After Sweep1 I want to have seam in this point. [obraz] After Sweep1 everything look fine. I’ve got my front face divided a…

You might want to post your file

Sure. CapProblem.3dm (401.3 KB)

I think my approach to an object like this would be to create a closed poly line with ortho on, then fillet corners as desired to make the cross section. Then I would extrude it. If you need it to be a solid instead of an extrusion, then explode it, select all the pieces and join them. This is not …

Hello - run the DivideAlongCreases command, with no pre-selection and set SplitAttangents =Yes, then select the object. Surfaces that have segments that are tangent and not curvature continuous (e.g. often created when the input is tangent arcs and straights) can cause problems for the meshing nee…

hi Pascal, This seems like a bad meshing bug, no? A user should not have to split a surface for this to work IMO. G

Yes. Or, splitting should just happen, and merging should be the thing you have to do deliberately. I have not got any traction with that over the years. SplitAttangents=Yes/No in some commands is the best we have. -Pascal

[image] pascal: I have not got any traction with that over the years. Me neither. [image] pascal: SplitAttangents=Yes/No in some commands is the best we have. At least if that was set to yes by default, it wouldn’t be so bad. But it’s not.

I’ll give it another spin… RH-61054 ExtrudeCrv: Split by default -Pascal

I didn’t have a problem with extruding that curve to a solid. The curve does however have a few unnecessary control points at the top. Below is a screenshot with the faulty brep from @kubadrozdowski and mine in front [image]

Hi Martin - if you use extrusions then the splitting occurs; if 1) UseExtrusions is set to Polysurfaces (not the default) and 2) SplitAtTangents=No (default) then you get the combined surfaces in ExtrudeCrv. -Pascal

Cap command is corrupting the surface

Rhino Rhino for Windows

brian (Brian Gillespie) October 27, 2020, 10:45pm 14

RH-61054 is fixed in the latest BETA

Topic		Replies	Views
Cap planar holes Rhino for Windows	5	997	February 17, 2020
Simple sweep. Why this when I cap? Rhino windows , rhino7	1	319	August 4, 2022
Joining or capping tapered surfaces fails Rhino for Mac	3	665	August 26, 2016
Surfaces warp when joined Rhino mac	10	708	July 19, 2021
Surface Creation: Splitting at tangents Rhino for Windows	7	2661	March 30, 2017

Cap command is corrupting the surface

Related topics